GY-63_MS5611/libraries/ADT7470/ADT7470.h
2021-12-11 17:23:51 +01:00

129 lines
3.5 KiB
C++

#pragma once
//
// FILE: ADT7470.h
// AUTHOR: Rob Tillaart
// VERSION: 0.1.4
// PURPOSE: Arduino library for I2C ADT7470 Fan Monitoring
// URL: https://github.com/RobTillaart/ADT7470
// http://forum.arduino.cc/index.php?topic=363218.0
//
// HISTORY:
// see ADT7470.cpp file
#include "Arduino.h"
#include "Wire.h"
#define ADT7470_LIB_VERSION (F("0.1.4"))
#ifndef ADT7470_TIMEOUT
#define ADT7470_TIMEOUT 1000
#endif
#ifndef ADT7470_ADDR_HIGH
#define ADT7470_ADDR_HIGH 0x2F
#endif
#ifndef ADT7470_ADDR_LOW
#define ADT7470_ADDR_LOW 0x2C
#endif
#ifndef ADT7470_ADDR_FLOAT
#define ADT7470_ADDR_FLOAT 0x2E
#endif
class ADT7470
{
public:
ADT7470(uint8_t address);
#if defined (ESP8266) || defined(ESP32)
void begin(uint8_t sda, uint8_t scl);
#endif
void begin();
// GENERIC
boolean isConnected();
uint8_t getRevision();
uint8_t getDeviceID(); // should return 0x70
uint8_t getCompanyID(); // should return 0x41
void startMonitoring();
void stopMonitoring();
void powerDown();
void powerUp();
// MEASURE TEMPERATURE - not tested
// Page 13 daisy chained specific TMP05 / TMP06 sensors
int8_t getTemperature(uint8_t index);
int8_t getMaxTemperature();
// Page 16
bool setTemperatureLimit(uint8_t index, int8_t low, int8_t high);
int8_t getTemperatureLowLimit(uint8_t index);
int8_t getTemperatureHighLimit(uint8_t index);
// SET FAN SPEED
// Page 25 index = 0..3
bool setPWM(uint8_t index, uint8_t value);
uint8_t getPWM(uint8_t index);
// Page 36 value = 0..7
bool setFanLowFreq(uint8_t value = 0); // PWM freq..
bool setFanHighFreq(uint8_t value = 0);
// Page 21
void setInvertPWM(uint8_t index);
uint8_t getInvertPWM(uint8_t index);
// MEASURE FAN SPEED
// Page 23-24 index = 0..3 value = 1..4
bool setPulsesPerRevolution(uint8_t index, uint8_t value);
// returns 1..4
uint8_t getPulsesPerRevolution(uint8_t index);
// P30 FST_TCH fast = measurement/250 ms slow = measurement/1000ms.
void setFastTach();
void setSlowTach();
uint16_t getTach(uint8_t index);
uint32_t getRPM(uint8_t index);
// Page 16 TACH/FAN ALARM
bool setTachLimits(uint8_t index, uint16_t low, uint16_t high);
uint16_t getTachLowLimits(uint8_t index);
uint16_t getTachHighLimits(uint8_t index);
// INTERRUPTS
// Page 17 - every bit set 0..10 represents one temp limit (high /low) exceeded
// if it return 0 => no limits exceeded.
uint16_t getTemperatureIRQstatus();
uint8_t getFanIRQstatus();
// index = 0..9
void setTemperatureIRQMask(uint8_t index);
void clrTemperatureIRQMask(uint8_t index);
uint8_t getTemperatureIRQMask(uint8_t index);
// index = 0..3
void setFanIRQMask(uint8_t index);
void clrFanIRQMask(uint8_t index);
uint8_t getFanIRQMask(uint8_t index);
// REGISTER OPERATORS
// set/clr one or more bits.
void setRegMask(uint8_t reg, uint8_t mask);
void clrRegMask(uint8_t reg, uint8_t mask);
// low level register interface
uint8_t getReg8(uint8_t reg);
void setReg8(uint8_t reg, uint8_t value);
uint16_t getReg16(uint8_t reg);
void setReg16(uint8_t reg, uint16_t value);
private:
// LOW LEVEL I2C
int _write(const uint8_t reg, uint8_t value);
int _write(const uint8_t reg, uint8_t *buffer, uint8_t length);
int _read(const uint8_t reg, uint8_t *value);
int _read(const uint8_t reg, uint8_t *buffer, uint8_t length);
uint8_t _address = 0;
};
// -- END OF FILE --