mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-09-19 16:46:11 -04:00
fad0391f62
To increase the usefulness of the example, I added the measurement of the complete cycle, which is the important figure. The reading time itself, though interesting, is not the limiting factor according to the datasheet. Additionally, I updated the printing instructions to create a nicely formatted output and limited the number cycles necessary to reach "del == 0". |
||
|---|---|---|
| .. | ||
| examples | ||
| dht.cpp | ||
| dht.h | ||
| readme.txt | ||
The DHT11, 21, 22, 33 and 44 are relative inexpensive sensors for measuring temperature and humidity. This library can be used for reading both values from these DHT sensors. The DHT11 only returns integers (e.g. 20) and does not support negative values. The others are quite similar and provide one decimal digit (e.g. 20.2) The hardware pins of the sensors and handshake are identical so ideal to combine in one lib. The library (0.1.13 version) is confirmed to work on: UNO (tested myself) 2009 (tested myself) MEGA2560 DUE attiny85 @8MHz Digistump Digix @ 84 MHz More information - http://playground.arduino.cc//Main/DHTLib - Notes: version 0.1.13 is the last stable version for both AVR and ARM version 0.1.14 and up are not compatible anymore with pre 1.0 Arduino version 0.1.14 and up have breaking changes wrt ARM based arduino's e.g DUE. version 0.1.15 is stable version for AVR only version 0.1.16 and 0.1.17 have breaking changes for DHT11 version 0.1.18 works again for DHT11 (avr only) version 0.1.19 fixed masking bug DHT11 (avr only) version 0.1.20 Reduce footprint (34 bytes) by using int8_t as error codes. (thanks to chaveiro) version 0.1.21 replace delay with delayMicroseconds() + small fix (thanks to codingforfun)