mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
143 lines
4.0 KiB
C++
143 lines
4.0 KiB
C++
#pragma once
|
|
//
|
|
// FILE: MS5611.h
|
|
// AUTHOR: Rob Tillaart
|
|
// Erni - testing/fixes
|
|
// VERSION: 0.3.9
|
|
// PURPOSE: Arduino library for MS5611 temperature and pressure sensor
|
|
// URL: https://github.com/RobTillaart/MS5611
|
|
|
|
|
|
#include "Arduino.h"
|
|
#include "Wire.h"
|
|
|
|
// BREAKOUT MS5611 aka GY63 - see datasheet
|
|
//
|
|
// SPI I2C
|
|
// +--------+
|
|
// VCC VCC | o |
|
|
// GND GND | o |
|
|
// SCL | o |
|
|
// SDI SDA | o |
|
|
// CSO | o |
|
|
// SDO | o L | L = led
|
|
// PS | o O | O = opening PS = protocol select
|
|
// +--------+
|
|
//
|
|
// PS to VCC ==> I2C (GY-63 board has internal pull up, so not needed)
|
|
// PS to GND ==> SPI
|
|
// CS to VCC ==> 0x76
|
|
// CS to GND ==> 0x77
|
|
|
|
|
|
#define MS5611_LIB_VERSION (F("0.3.9"))
|
|
|
|
#ifndef MS5611_DEFAULT_ADDRESS
|
|
#define MS5611_DEFAULT_ADDRESS 0x77
|
|
#endif
|
|
|
|
#define MS5611_READ_OK 0
|
|
#define MS5611_ERROR_2 2 // low level I2C error
|
|
#define MS5611_NOT_READ -999
|
|
|
|
|
|
enum osr_t
|
|
{
|
|
OSR_ULTRA_HIGH = 12, // 10 millis
|
|
OSR_HIGH = 11, // 5 millis
|
|
OSR_STANDARD = 10, // 3 millis
|
|
OSR_LOW = 9, // 2 millis
|
|
OSR_ULTRA_LOW = 8 // 1 millis Default = backwards compatible
|
|
};
|
|
|
|
|
|
class MS5611
|
|
{
|
|
public:
|
|
explicit MS5611(uint8_t deviceAddress = MS5611_DEFAULT_ADDRESS);
|
|
|
|
#if defined (ESP8266) || defined(ESP32)
|
|
bool begin(uint8_t sda, uint8_t scl, TwoWire *wire = &Wire);
|
|
#endif
|
|
bool begin(TwoWire *wire = &Wire);
|
|
bool isConnected();
|
|
|
|
// reset command + get constants
|
|
// mathMode = 0 (default), 1 = factor 2 fix.
|
|
// returns false if ROM constants are 0;
|
|
bool reset(uint8_t mathMode = 0);
|
|
|
|
// the actual reading of the sensor;
|
|
// returns MS5611_READ_OK upon success
|
|
int read(uint8_t bits);
|
|
// wrapper, uses the preset oversampling rate.
|
|
inline int read() { return read( (uint8_t) _samplingRate); };
|
|
|
|
// sets oversampling to a value between 8 and 12
|
|
void setOversampling(osr_t samplingRate);
|
|
|
|
// oversampling rate is in osr_t
|
|
osr_t getOversampling() const { return (osr_t) _samplingRate; };
|
|
|
|
// temperature is in ²C
|
|
float getTemperature() const;
|
|
|
|
// pressure is in mBar
|
|
float getPressure() const;
|
|
|
|
// OFFSET - 0.3.6
|
|
void setPressureOffset(float offset = 0) { _pressureOffset = offset; };
|
|
float getPressureOffset() { return _pressureOffset; };
|
|
void setTemperatureOffset(float offset = 0) { _temperatureOffset = offset; };
|
|
float getTemperatureOffset() { return _temperatureOffset; };
|
|
|
|
// to check for failure
|
|
int getLastResult() const { return _result; };
|
|
|
|
// last time in millis() when the sensor has been read.
|
|
uint32_t lastRead() const { return _lastRead; };
|
|
|
|
// _deviceID is a SHIFT XOR merge of 7 PROM registers, reasonable unique
|
|
uint32_t getDeviceID() const { return _deviceID; };
|
|
|
|
void setCompensation(bool flag = true) { _compensation = flag; };
|
|
bool getCompensation() { return _compensation; };
|
|
|
|
// develop functions.
|
|
/*
|
|
void setAddress(uint8_t address) { _address = address; }; // RANGE CHECK + isConnected() !
|
|
uint8_t getAddress() const { return _address; };
|
|
uint8_t detectAddress() { todo }; // works with only one on the bus?
|
|
*/
|
|
|
|
// EXPERIMENTAL
|
|
uint16_t getManufacturer();
|
|
uint16_t getSerialCode();
|
|
|
|
|
|
protected:
|
|
void convert(const uint8_t addr, uint8_t bits);
|
|
uint32_t readADC();
|
|
uint16_t readProm(uint8_t reg);
|
|
int command(const uint8_t command);
|
|
void initConstants(uint8_t mathMode);
|
|
|
|
uint8_t _address;
|
|
uint8_t _samplingRate;
|
|
int32_t _temperature;
|
|
int32_t _pressure;
|
|
float _pressureOffset;
|
|
float _temperatureOffset;
|
|
int _result;
|
|
float C[7];
|
|
uint32_t _lastRead;
|
|
uint32_t _deviceID;
|
|
bool _compensation;
|
|
|
|
TwoWire * _wire;
|
|
};
|
|
|
|
|
|
// -- END OF FILE --
|
|
|