GY-63_MS5611/libraries/RunningAverage
2021-12-28 10:13:44 +01:00
..
.github/workflows 0.4.1 RunningAverage 2021-11-24 10:03:41 +01:00
examples 0.4.2 RunningAverage 2021-12-28 10:13:44 +01:00
test 0.4.2 RunningAverage 2021-12-28 10:13:44 +01:00
.arduino-ci.yml 0.4.1 RunningAverage 2021-11-24 10:03:41 +01:00
keywords.txt 0.4.1 RunningAverage 2021-11-24 10:03:41 +01:00
library.json 0.4.2 RunningAverage 2021-12-28 10:13:44 +01:00
library.properties 0.4.2 RunningAverage 2021-12-28 10:13:44 +01:00
LICENSE 0.4.2 RunningAverage 2021-12-28 10:13:44 +01:00
performance.txt update libraries R-Z 2020-11-27 11:33:55 +01:00
README.md 0.4.2 RunningAverage 2021-12-28 10:13:44 +01:00
RunningAverage.cpp 0.4.2 RunningAverage 2021-12-28 10:13:44 +01:00
RunningAverage.h 0.4.2 RunningAverage 2021-12-28 10:13:44 +01:00

Arduino CI Arduino-lint JSON check License: MIT GitHub release

RunningAverage

Arduino library to calculate the running average by means of a circular buffer.

Description

The RunningAverage object gives a running average of the last N floating point numbers, giving them all equal weight. This is done by adding new data to an internal circular buffer, removing the oldest and replace it by the newest. The size of the internal buffer can be set in the constructor.

By keeping track of the _sum the runningAverage can be calculated fast (only 1 division) at any time. This is done with getFastAverage(). However the constant adding and subtracting when adding new elements possibly introduces an ever increasing error. In tests adding up to 1500000 numbers this error was always small. But that is no proof. In version 0.2.16 a fix was added that uses the calculation of the sum in getAverage() to update the internal _sum.

Interface

Constructor

  • RunningAverage(uint16_t size) allocates dynamic memory, one float (4 bytes) per element. No default size (yet).
  • ~RunningAverage() destructor to free the memory allocated.

Basic

  • void clear() empties the internal buffer.
  • void add(float value) wrapper for addValue()
  • void addValue(float value) adds a new value to the object, if internal buffer is full, the oldest element is removed.
  • void fillValue(float value, uint16_t number) adds number elements of value. Good for initializing the system to z certain starting average.
  • float getValue(uint16_t position) returns the value at position from the additions. Position 0 is the first one to disappear.
  • float getAverage() iterates over all elements to get the average, slower but accurate. Updates the variables used by getFastAverage() to improve its accuracy again.
  • float getFastAverage() reuses previous calculated values, therefore faster. Accuracy can drift.

Extended functions

  • float getStandardDeviation() returns the standard deviation of the current content. Needs more than one element to be calculable.
  • float getStandardError() returns the standard error of the current content.
  • float getMin() returns minimum since last clear, does not need to be in the buffer any more.
  • float getMax() returns maximum since last clear, does not need to be in the buffer any more.
  • float getMinInBuffer() returns minimum in the internal buffer.
  • float getMaxInBuffer() returns maximum in the internal buffer.

Admin functions

  • bool bufferIsFull() returns true if buffer is full.
  • float getElement(uint16_t index) get element directly from internal buffer at index. (debug)
  • uint16_t getSize() returns the size of the internal array.
  • uint16_t getCount() returns the number of slots used of the internal array.

Partial

  • void setPartial(uint16_t partial = 0) use only a part of the internal array. Allows to change the weight and history factor. 0 ==> use all == default.
  • uint16_t getPartial() returns the set value for partial.

Last

These functions get the basic statistics of the last N added elements. Returns NAN if there are no elements and it will reduce count if there are less than count elements in the buffer.

  • float getAverageLast(uint16_t count) get the average of the last count elements.
  • float getMinInBufferLast(uint16_t count) get the minimum of the last count elements.
  • float getMaxInBufferLast(uint16_t count) get the maximum of the last count elements.

These functions are useful in cases where you might want to calculate and display the statistics of a subset of the added elements. Reason might be to compare this with the numbers of the whole buffer to notice changes earlier. Otherwise one should create multiple RunningAverage objects each with its own length, effectively having multiple copies of the data added.

Note: if called with a value larger or equal to getCount() (incl getSize()) as parameter, the functions will return the statistics of the whole buffer.

Operation

See examples

Future

  • add error handling (important?)
  • default size for constructor
  • update documentation, explain better.
  • create a double based derived class? Template class?
  • check for optimizations.
  • clear(bool zero = true) to suppress setting all to 0. ??
  • separate releaseNotes.md