GY-63_MS5611/libraries/PT2314

PT2314

Arduino library for PT2314 i2C 4 channel audio processor.

Description

The PT2314 library is experimental as it is not tested with hardware.

The PT2314 is a audio processor that can select from four stereo inputs, and provides one stereo output. Attributes to control are volume, gain, attenuation, bass, treble, mute and loudness. The library should also work with the PT7314, a separate constructor exist for it.

A separate derived class is created for the PT7313, an compatible audio processor with only three stereo inputs and two stereo outputs. It is used in automotive to control front and back speakers.

processor	inputs	outputs	datasheet
PT2314	4	1	V1.4 July, 2005
PT7314	4	1	V1.0 Jan, 2010
PT7313	3	2	V1.0 feb, 2010

processor	volume	attn	gain	bass	treble
PT2314	0..63	0..31	0..3	-14..14	-14..14
PT7314	0..63	0..31	0..3	-14..14	-14..14
PT7313	0..63	0..31	0..3	-14..14	-14..14

Feedback as always, is welcome.

0.2.0 Breaking change

Version 0.2.0 introduced a breaking change. You cannot set the pins in begin() any more. This reduces the dependency of processor dependent Wire implementations. The user has to call Wire.begin() and can optionally set the Wire pins before calling begin().

I2C

processor	MAX KHz	tested
PT2314	100	N
PT7314	400	N
PT7313	400	N

Note: Datasheet PT7314 states that the device needs at least 50 ms to wake up before it can process I2C commands. So one might need to give it some time to get started.

Multiplexing

If you want to put more than one PT2314 on an I2C bus you need an I2C multiplexer as the device has a fixed address.

See https://github.com/RobTillaart/TCA9548

(not tested, feedback welcome).

Related

• https://github.com/RobTillaart/HC4052 (multiplexer for more inputs)
• https://github.com/RobTillaart/TCA9548 (I2C multiplexer)

Interface PT2314 PT7314

#include "PT2314.h"

Constructors

• PT2314(TwoWire *wire = &Wire) constructor, optional set Wire interface.
• PT7313(TwoWire *wire = &Wire) constructor, optional set Wire interface.
• PT7314(TwoWire *wire = &Wire) constructor, optional set Wire interface.
• bool begin() initialized library. Returns true if device can be seen on the I2C bus.
• bool isConnected() returns true if device (0x44) can be seen on I2C bus.

Channel

• void setChannel(uint8_t channel = 0) Select the input channel 0..3.
• uint8_t getChannel() return selected input channel.

Volume

• void setMute(bool on = true) mute all output channels.
• bool getMute() get current mute state.
• void setLoudness(bool on = true) set loudness on.
• bool getLoudness() get current loudness state.
• void setVolume(uint8_t volume = 0) set the volume between 0..63.
• uint8_t getVolume() get current volume.

Bass Treble

• void setBass(int8_t bass = 0) bass can be set to -14..14 dB, will be rounded to even numbers only. So 15 levels in total.
• int8_t getBass() get current bass level.
• void setTreble(int8_t treble = 0) treble can be set to -14..14 dB, will be rounded to even numbers only. So 15 levels in total.
• int8_t getTreble() get current treble level.

Gain

• void setGain(uint8_t gain = 0) Gain can be 0..3. CHeck datasheet for mapping.
• uint8_t getGain()

Gain	dB
0	11.25
1	7.50
2	3.75
3	0.00

Attenuation

• void setAttnLeft(uint8_t value = 31) set the left attenuation from 0..31.
• uint8_t getAttnLeft() get current left attenuation level.
• void setAttnRight(uint8_t value = 31) set the right attenuation from 0..31.
• uint8_t getAttnRight() get current right attenuation level.
• void setAttn(uint8_t attn) set all channels in one call.

Formula attenuation:

Attn = value * -1.25;  //  dB  0..-37.50,  31 ==> MUTE.

---

Interface PT7313

#include "PT2314.h"

Additional

• PT7313(TwoWire *wire = &Wire) constructor.
• void setMute(bool on) idem, four channel version.
• void setChannel(uint8_t channel = 0) idem, 0..2.

PT7313 attenuation

• void setAttnLeftBack(uint8_t value = 31) idem, 0..31.
• uint8_t getAttnLeftBack() get current level.
• void setAttnRightBack(uint8_t value = 31) idem, 0..31
• uint8_t getAttnRightBack() get current level.
• void setAttnLeftFront(uint8_t value = 31) idem, 0..31
• uint8_t getAttnLeftFront() get current level.
• void setAttnRightFront(uint8_t value = 31) idem, 0..31
• uint8_t getAttnRightFront() get current level.

Future

Must

• test with hardware
• improve documentation

Should

• add more examples.
• check parameters range: 0..63 => -63..0?
  • some are in dB others not.

Could

• replace magic numbers with defines.
  • PT2413_MAX_ATTN 31 etc.
• extend unit test
• add getType() 7313 or 13 / 14 (16 or 8 bit)
• error handling

Wont (unless on request)

Support

If you appreciate my libraries, you can support the development and maintenance. Improve the quality of the libraries by providing issues and Pull Requests, or donate through PayPal or GitHub sponsors.

Thank you,