GY-63_MS5611/libraries/ADG728/ADG728.h
2024-07-03 17:21:20 +02:00

75 lines
1.9 KiB
C++

#pragma once
//
// FILE: ADG728.h
// AUTHOR: Rob Tillaart
// VERSION: 0.1.0
// DATE: 2024-07-03
// PURPOSE: Arduino Library for I2C ADG728 matrix switch. 1x8 Multiplexer.
// URL: https://github.com/RobTillaart/ADG728
// https://www.adafruit.com/product/5899
#include "Arduino.h"
#include "Wire.h"
#define ADG728_LIB_VERSION (F("0.1.0"))
// ERROR CODES (to be elaborated)
#define ADG728_OK 0
#define ADG728_ERROR_I2C -10 // not used yet
#define ADG728_ERROR_CHANNEL -20 // not used yet
class ADG728
{
public:
// deviceAddress = 0x4C .. 0x4F
ADG728(uint8_t deviceAddress, TwoWire *wire = &Wire);
bool begin(uint8_t mask = 0x00); // default no channels enabled
bool isConnected(); // find address on I2C bus
// channel = 0..channelCount()-1
uint8_t channelCount();
bool enableChannel(uint8_t channel); // enable channel NON exclusive
bool disableChannel(uint8_t channel);
bool selectChannel(uint8_t channel); // enable channel exclusive
bool isEnabled(uint8_t channel);
bool disableAllChannels();
// mask = 0x00 .. 0xFF - every bit is a channel.
// although not for derived types.
// note 1: these are set simultaneously.
// note 2: these may include interrupt bits (in derived classes)
bool setChannelMask(uint8_t mask);
uint8_t getChannelMask();
// reset
void setResetPin(uint8_t resetPin);
void reset(); // trigger reset pin
// set forced IO (default false)
void setForced(bool forced = false);
bool getForced();
int getError();
protected:
uint8_t _address;
TwoWire* _wire;
uint8_t _mask; // caching mask = status of channels
uint8_t _resetPin; // default not set == -1 (255)
bool _forced;
int _error;
uint8_t _channels;
};
// -- END OF FILE --