alex/GY-63_MS5611
1
0
Fork 0
mirror of https://github.com/RobTillaart/Arduino.git synced 2024-10-03 18:09:02 -04:00
Code Issues Actions Packages Projects Releases Wiki Activity
master
GY-63_MS5611/libraries/ADG725
History
Rob Tillaart 568d35f292 bulk update GitHub actions
2024-04-13 10:35:57 +02:00
..
.github bulk update GitHub actions 2024-04-13 10:35:57 +02:00
examples 0.1.2 ADG725 2024-03-17 17:47:00 +01:00
test 0.1.0 ADG725 2023-07-24 20:11:58 +02:00
.arduino-ci.yml 0.1.0 ADG725 2023-07-24 20:11:58 +02:00
ADG725.h 0.1.2 ADG725 2024-03-17 17:47:00 +01:00
CHANGELOG.md 0.1.2 ADG725 2024-03-17 17:47:00 +01:00
keywords.txt 0.1.1 ADG725 2023-10-16 16:00:24 +02:00
library.json 0.1.2 ADG725 2024-03-17 17:47:00 +01:00
library.properties 0.1.2 ADG725 2024-03-17 17:47:00 +01:00
LICENSE 0.1.2 ADG725 2024-03-17 17:47:00 +01:00
README.md 0.1.2 ADG725 2024-03-17 17:47:00 +01:00

README.md

Arduino CI Arduino-lint JSON check GitHub issues

License: MIT GitHub release PlatformIO Registry

ADG725

Arduino library for ADG725 - 16 to 1 channel (2x) multiplexer.

Description

Experimental

ADG725 is an Arduino class that controls two 16 to 1 multiplexers (or 1 to 16 multiplexer) over a SPI like interface.

The channel selection is disjunct which means that only
one of the 16 channels can be connected (selected) at the same time. The channels can be set per multiplexer or together (same channel) in one call. The library also support to set them all off (17th state).

On power-up, all switches are in the OFF state, so no channel is selected.

This library can be used e.g. to connect 16 analog devices (potmeters) to one analog port, or to select between 16 DHT22 sensors.

No tests with hardware have been done yet, so use with care. Feedback welcome!

Multiple ADG725 in parallel

To be tested

It seems possible to connect multiple ADG725 devices side by side and control them as one. This would allow to create e.g a fast 8x16 multiplexer.

If you want to control them separately, every device need its own syncPin a.k.a. Chip Select Pin. The data- and clockPin can be shared. If you want to control them as one, all three lines should be shared.

Related

Interface

#include "ADG725.h"
  • ADG725(uint8_t clockPin, uint8_t dataPin, uint8_t syncPin) constructor.
  • void setChannel(uint8_t channel) set the current channel for both A and B. Valid values for channel are 0..15.
  • void setChannelA(uint8_t channel) set the current channel for A only. Valid values for channel are 0..15.
  • void setChannelB(uint8_t channel) set the current channel for B only. Valid values for channel are 0..15.
  • uint8_t getChannelA() get last set channel A == 0..15 or ADG725_ALLOFF (128).
  • uint8_t getChannelB() get last set channel B == 0..15 or ADG725_ALLOFF (128).
  • uint8_t channelCount() returns 16 for ADG725, convenience for loops.
  • void allOff() sets all channels to OFF, no channel selected.

Future

Must

  • improve documentation
  • test with hardware
  • keep in sync with ADG726 (interface)

Should

  • add examples
  • test multiple ADG725 in parallel

Could

Wont

Support

If you appreciate my libraries, you can support the development and maintenance. Improve the quality of the libraries by providing issues and Pull Requests, or donate through PayPal or GitHub sponsors.

Thank you,