#pragma once
//
//    FILE: PCA9552.h
//  AUTHOR: Rob Tillaart
//    DATE: 2023-07-17
// VERSION: 0.3.1
// PURPOSE: Arduino library for for I2C PCA9552 16 channel PWM
//     URL: https://github.com/RobTillaart/PCA9552


#include "Arduino.h"
#include "Wire.h"


#define PCA9552_LIB_VERSION         (F("0.3.1"))


//  REGISTERS
#define PCA9552_INPUT0      0x00
#define PCA9552_INPUT1      0x01
#define PCA9552_PSC0        0x02
#define PCA9552_PWM0        0x03
#define PCA9552_PSC1        0x04
#define PCA9552_PWM1        0x05
#define PCA9552_LS0         0x06
#define PCA9552_LS1         0x07
#define PCA9552_LS2         0x08
#define PCA9552_LS3         0x09


//  MUX OUTPUT MODES
#define PCA9552_MODE_LOW      0
#define PCA9552_MODE_HIGH     1
#define PCA9552_MODE_PWM0     2
#define PCA9552_MODE_PWM1     3


//  ERROR CODES (not all used yet)
#define PCA9552_OK          0x00
#define PCA9552_ERROR       0xFF
#define PCA9552_ERR_WRITE   0xFE
#define PCA9552_ERR_CHAN    0xFD
#define PCA9552_ERR_MODE    0xFC
#define PCA9552_ERR_REG     0xFB
#define PCA9552_ERR_I2C     0xFA


/////////////////////////////////////////////////////
//
//  CLASS PCA9552
//
class PCA9552
{
public:
  explicit PCA9552(const uint8_t deviceAddress, TwoWire *wire = &Wire);

  bool     begin();
  bool     isConnected();
  uint8_t  reset();

  uint8_t  getAddress();
  uint8_t  outputCount();

  //  GPIO
  uint16_t getInput();
  void     pinMode1(uint8_t pin, uint8_t mode);
  void     write1(uint8_t pin, uint8_t value);
  uint8_t  read1(uint8_t pin);

  //  PRESCALERS
  void     setPrescaler(uint8_t generator, uint8_t prescaler = 0);
  uint8_t  getPrescaler(uint8_t generator);

  //  PWM
  void     setPWM(uint8_t generator, uint8_t pwm = 128);
  uint8_t  getPWM(uint8_t generator);


  //  OUTPUT MODE - MUX SELECTION
  //  pin:   0..3
  //  mode:
  //    0 = output is set LOW (LED on)
  //    1 = output is set high-impedance (LED off; default)
  //    2 = output blinks at PWM0 rate
  //    3 = output blinks at PWM1 rate
  uint8_t  setOutputMode(uint8_t pin, uint8_t mode);
  uint8_t  getOutputMode(uint8_t pin);

  //  ERROR
  uint8_t  getLastError();


private:
  uint8_t  writeReg(uint8_t reg, uint8_t value);
  uint8_t  readReg(uint8_t reg);

  uint8_t  _address;
  uint8_t  _outputCount;
  uint8_t  _error;

  TwoWire* _wire;
};


//  -- END OF FILE --