//
//    FILE: pcf8574_test.ino
//  AUTHOR: Rob Tillaart
//    DATE: 27-08-2013
//
// PUPROSE: demo 
//

#include "PCF8574.h"
#include <Wire.h>

// adjust addresses if needed
PCF8574 PCF_38(0x38);  // add switches to lines  (used as input)
PCF8574 PCF_39(0x39);  // add leds to lines      (used as output)

void setup()
{
  Serial.begin(115200);
  Serial.println("\nTEST PCF8574\n");
   
  uint8_t value = PCF_38.read8();
  Serial.print("#38:\t");
  Serial.println(value);

  for (int i=0; i<255; i++)
  {
    PCF_39.write8(i);
    delay(100);
  }
  
  PCF_39.write(0, 1);
  for (int i=0; i<7; i++)
  {
    PCF_39.shiftLeft();
    delay(100);
  }
  
  for (int i=0; i<7; i++)
  {
    PCF_39.shiftRight();
    delay(100);
  }
  
  for (int i=0; i<8; i++)
  {
    PCF_39.write(i, 1);
    delay(100);
    PCF_39.write(i, 0);
    delay(100);
  }
  
  for (int i=0; i<8; i++)
  {
    PCF_39.toggle(i);
    delay(100);
    PCF_39.toggle(i);
    delay(100);
  }
}

void loop()
{
  // echos the lines
  uint8_t value = PCF_38.read8();
  PCF_39.write8(value);
  delay(100);
}
//
// END OF FILE
//