//
//    FILE: AM2320_test.ino
//  AUTHOR: Rob Tillaart
// VERSION: 0.1.2
// PURPOSE: demo sketch for AM2320 I2C humidity & temperature sensor
//
// HISTORY:
// 0.1.0   2017-12-11 initial version
// 0.1.1   2017-12-12 added test for set* functions
// 0.1.2   2020-05-03 updated to 0.2.0 version of lib.
//

#include <AM232X.h>

AM232X AM2320;

void setup()
{
  Wire.begin();

  Serial.begin(115200);
  Serial.println(__FILE__);
  Serial.print("LIBRARY VERSION: ");
  Serial.println(AM232X_LIB_VERSION);
  Serial.println();


  // sensor only returns one decimal.
  Serial.println();
  Serial.println("Read:\t");
  int status = AM2320.read();
  switch (status)
  {
  case AM232X_OK:
    Serial.println("OK");
    break;
  default:
    Serial.println(status);
    break;
  }
  Serial.print("Temp:\t");
  Serial.println(AM2320.getTemperature(), 1);
  Serial.print("Hum:\t");
  Serial.println(AM2320.getHumidity(), 1);

  Serial.println();
  Serial.println("GET SENSOR INFO (experimental)");
  Serial.print("Model:\t");
  Serial.println(AM2320.getModel());
  Serial.print("Version:\t");
  Serial.println(AM2320.getVersion());
  Serial.print("DevId:\t");
  Serial.println(AM2320.getDeviceID());

  Serial.println();
  Serial.println("GET REGISTERS (experimental)");
  Serial.print("Status:\t");
  Serial.println(AM2320.getStatus());
  Serial.print("UserA:\t");
  Serial.println(AM2320.getUserRegisterA());
  Serial.print("UserB:\t");
  Serial.println(AM2320.getUserRegisterB());

  Serial.println();
  Serial.println("SET REGISTERS (experimental)");
  AM2320.setStatus(42);
  Serial.print("Status 42 ==> ");
  Serial.println(AM2320.getStatus());
  AM2320.setUserRegisterA(1234);
  Serial.print("UserA 1234 ==> ");
  Serial.println(AM2320.getUserRegisterA());
  AM2320.setUserRegisterB(5678);
  Serial.print("UserB 5678 ==> ");
  Serial.println(AM2320.getUserRegisterB());

  Serial.println("done...");
}

void loop()
{
}

// -- END OF FILE --