//
//    FILE: AGS02MA_UGM3.ino
//  AUTHOR: Rob Tillaart
// VERSION: 0.1.0
// PURPOSE: test application
//    DATE: 2021-08-12
//     URL: https://github.com/RobTillaart/AGS02MA
//


#include "AGS02MA.h"


AGS02MA AGS(26);


void setup()
{
  Serial.begin(115200);
  Serial.println(__FILE__);

  Wire.begin();

  Serial.print("AGS02MA_LIB_VERSION: ");
  Serial.println(AGS02MA_LIB_VERSION);
  Serial.println();

  bool b = AGS.begin();
  Serial.print("BEGIN:\t");
  Serial.println(b);

  // pre-heating improves measurement quality 
  // can be skipped
  Serial.println("\nWarming up (120 seconds = 24 dots)");
  while (AGS.isHeated() == false)
  {
    delay(5000);
    Serial.print(".");
  }
  Serial.println();

  b = AGS.setUGM3Mode();
  uint8_t m = AGS.getMode();
  Serial.print("MODE:\t");
  Serial.print(b);
  Serial.print("\t");
  Serial.println(m);

  uint8_t version = AGS.getSensorVersion();
  Serial.print("VERS:\t");
  Serial.println(version);
}


void loop()
{
  delay(3000);
  uint32_t value = AGS.readUGM3();
  Serial.print("UGM3:\t");
  Serial.print(value);
  Serial.print("\t");
  Serial.print(AGS.lastStatus(), HEX);
  Serial.print("\t");
  Serial.print(AGS.lastError(), HEX);
  Serial.println();

}


// -- END OF FILE --