//
//    FILE: unit_test_001.cpp
//  AUTHOR: Rob Tillaart
// VERSION: 0.1.0
//    DATE: 2021-09-25
// PURPOSE: unit tests for the SHT2x temperature and humidity sensor
//          https://github.com/RobTillaart/SHT2x
//          https://www.adafruit.com/product/2857
//          https://github.com/Arduino-CI/arduino_ci/blob/master/REFERENCE.md
//

// supported assertions
// ----------------------------
// assertEqual(expected, actual)
// assertNotEqual(expected, actual)
// assertLess(expected, actual)
// assertMore(expected, actual)
// assertLessOrEqual(expected, actual)
// assertMoreOrEqual(expected, actual)
// assertTrue(actual)
// assertFalse(actual)
// assertNull(actual)
// assertEqualFloat(expected, actual, epsilon);    // fabs(a - b) <= epsilon

/*
  most unit tests will test for fail 
  as there is no sensor connected
  and there is no mockup.
  
  It appears that Wire.write does not fail without sensor...
*/

#include <ArduinoUnitTests.h>

#include "Arduino.h"
#include "SHT2x.h"

int expect;  // TODO needed as there seems a problem with 8 bit comparisons (char?)

uint32_t start, stop;

unittest_setup()
{
}


unittest_teardown()
{
}


unittest(test_begin)
{
  SHT2x sht;

  bool b = sht.begin();
  assertEqual(b, true);

  assertTrue(sht.reset());
  expect = SHT2x_OK;
  assertEqual(expect, sht.getError());

  Serial.println(sht.getTemperature());
  Serial.println(sht.getHumidity());
  Serial.println(sht.getRawTemperature());
  Serial.println(sht.getRawHumidity());

  // default value == 0
  assertEqualFloat(-46.85, sht.getTemperature(), 0.01);
  assertEqualFloat(-6, sht.getHumidity(), 0.01);
  assertEqual(0, sht.getRawTemperature());
  assertEqual(0, sht.getRawHumidity());
}


unittest(test_read)
{
  SHT2x sht;
  bool b = sht.begin();
  assertEqual(b, true);

  assertTrue(sht.isConnected());
  expect = SHT2x_OK;
  assertEqual(expect, sht.getError());

  // assertion wire.available fails ... 
  // assertFalse(sht.read());
  // expect = SHT2x_ERR_READBYTES;
  // assertEqual(expect, sht.getError());

  // start = millis();
  // assertFalse(sht.read());
  // stop = millis();
  // Serial.println(stop - start);
  // expect = SHT2x_ERR_READBYTES;
  // assertEqual(expect, sht.getError());

  // start = millis();
  // assertFalse(sht.read());
  // stop = millis();
  // Serial.println(stop - start);
  // expect = SHT2x_ERR_READBYTES;
  // assertEqual(expect, sht.getError());
}


unittest(test_getStatus)
{
  SHT2x sht;
  bool b = sht.begin();
  assertEqual(b, true);
  
  assertEqual(0x00, sht.getStatus());
  expect = SHT2x_OK;
  assertEqual(expect, sht.getError());
}


unittest(test_heater)
{
  SHT2x sht;
  bool b = sht.begin();
  assertEqual(b, true);
  
  // assertion wire.available fails ... 
  // assertFalse(sht.heatOn());
  // expect = SHT2x_ERR_READBYTES;
  // assertEqual(expect, sht.getError());

  // assertFalse(sht.heatOff());
  // expect = SHT2x_ERR_READBYTES;
  // assertEqual(expect, sht.getError());

  // assertFalse(sht.isHeaterOn());
  // expect = SHT2x_OK;
  // assertEqual(expect, sht.getError());
}



unittest_main()

// --------