// // FILE: dhtnew_minimum.ino // AUTHOR: Rob Tillaart // PURPOSE: DHTNEW library test sketch // URL: https://github.com/RobTillaart/DHTNew // DHT PIN layout from left to right // ================================= // FRONT : DESCRIPTION // pin 1 : VCC // pin 2 : DATA // pin 3 : Not Connected // pin 4 : GND #include DHTNEW mySensor(5); // ESP 16 UNO 5 MKR1010 5 void setup() { while(!Serial); // MKR1010 needs this Serial.begin(115200); Serial.println(__FILE__); Serial.println(); // MKR1010 needs this // mySensor.setDisableIRQ(false); Serial.println("BEFORE OFFSET"); delay(2000); mySensor.read(); Serial.print(mySensor.getHumidity(), 1); Serial.print("\t"); Serial.println(mySensor.getTemperature(), 1); mySensor.setHumOffset(10); mySensor.setTempOffset(-3.5); Serial.println("AFTER OFFSET"); } void loop() { if (millis() - mySensor.lastRead() > 2000) { mySensor.read(); Serial.print(mySensor.getHumidity(), 1); Serial.print("\t"); Serial.println(mySensor.getTemperature(), 1); } } // -- END OF FILE --