0.3.4 Cozir

libraries/Cozir/README.md

@@ -23,6 +23,11 @@ This version of the library supports only the **Serial** interface.
 Preferred is a hardware Serial port to connect the sensor but software Serial 
 does work too. 
 
+The library (since 0.3.4) a separate class to parse the STREAMING data.
+See COZIRParser below. 
+The Cozir class is focussed on polling and sending commands.
+
+
 #### Notes
 
 - Read the datasheet before using this library. 
@@ -212,16 +217,41 @@ Also the user must reset the operating mode either to **CZR_POLLING** or **CZR_S
 See examples.
 
 
+## COZIRParser
+
+Class to parse the output of a COZIR sensor in stream mode.
+
+## Description
+
+(added in 0.3.4, experimental)
+
+The COZIRparser object has a main function called **nextChar(c)**
+It needs to be called with all incoming characters from the sensor.
+
+If a new field is found **nextChar()** returns the field identifier 
+of the last parsed field (single char) to indicate its value has been 
+updated, otherwise it returns 0.
+The updated value can be accessed with one of the functions, see cozir.h file.
+
+An example **Cozir_stream_parse.ino** is added to show how to use this class.
+
+Note: to send commands e.g. outputField selection, to the sensor the COZIR
+ class is used (which is mostly focussed on polling access).
+
+
+
 ## Future
 
 - improve documentation
+  - COZIR Parser a separate readme?
   - matrix functions vs sensor ?
 - test
   - test streaming mode
   - test table / matrix ?
 - add examples
   - example COZIR with I2C display?
-  - example streaming mode parsing.
+  - example with GREEN YELLOW RED LED?
+  - examples for COZIRParser.
 - COZIR I2C class for newer generation 
   ~ same functional interface
   - multiWire / pin a la PCF8574 lib

libraries/Cozir/changelog.md

@@ -2,6 +2,12 @@
 # Cozir Changelog
 
 
+## 0.3.4 2022-02-22
+- added COZIRParser class for streaming mode
+- added streaming examples
+- minor edits
+
+
 ## 0.3.3 2022-02-21
 - update readme,
 - update + add examples

libraries/Cozir/cozir.cpp

@@ -1,7 +1,7 @@
 //
 //    FILE: Cozir.cpp
 //  AUTHOR: DirtGambit & Rob Tillaart
-// VERSION: 0.3.3
+// VERSION: 0.3.4
 // PURPOSE: library for COZIR range of sensors for Arduino
 //          Polling Mode
 //     URL: https://github.com/RobTillaart/Cozir
@@ -417,4 +417,135 @@ uint16_t COZIR::_getEEPROM2(uint8_t address)
 
 
 
+////////////////////////////////////////////////////////////////////////////////
+//
+// C0ZIRParser
+//
+C0ZIRParser::C0ZIRParser()
+{
+  init();
+}
+
+
+void C0ZIRParser::init()
+{
+  _light              = 0;
+  _humidity           = 0;
+  _LED_FILT           = 0;
+  _LED_RAW            = 0;
+  _LED_MAX            = 0;
+  _zeroPoint          = 0;
+  _temperature_RAW    = 0;
+  _temperature_FILT   = 0;
+  _LED_signal_FILT    = 0;
+  _LED_signal_RAW     = 0;
+  _temperature_Sensor = 0;
+  _CO2_FILT           = 0;
+  _CO2_RAW            = 0;
+  _samples            = 0;
+  _PPM                = 1;  // Note default one
+  _value              = 0;
+  _field              = 0;
+}
+
+
+uint8_t C0ZIRParser::nextChar(char c)
+{
+  uint8_t rv = 0;
+  switch(c)
+  {
+    case '0' ... '9':
+      _value *= 10;
+      _value += (c - '0');
+      break;
+    case 'L':
+    case 'T':
+    case 'H':
+    case 'z':
+    case 'Z':
+    case 'A':
+    case 'P':
+      rv = store();
+      _field = c;
+      _value = 0;
+      break;
+    default:
+      break;
+  }
+  return rv;
+}
+
+
+float C0ZIRParser::celsius()
+{
+  return  0.1 * (_temperature_FILT - 1000.0);
+}
+
+
+//////////////////////////////////
+//
+//  PRIVATE
+//
+uint8_t C0ZIRParser::store()
+{
+  switch(_field)
+  {
+    //  LIGHT related
+    case 'L':
+      _light = _value;
+      return _field;
+    case 'D':
+      _LED_FILT = _value;
+      return _field;
+    case 'd':
+      _LED_RAW = _value;
+      return _field;
+    case 'l':
+      _LED_MAX = _value;
+      return _field;
+    case 'o':
+      _LED_signal_FILT = _value;
+      return _field;
+    case 'O':
+      _LED_signal_RAW = _value;
+      return _field;
+
+    // TEMPERATURE & HUMIDITY
+    case 'V':
+      _temperature_RAW = _value;
+      return _field;
+    case 'v':
+      _temperature_Sensor = _value;
+      return _field;
+    case 'T':
+      _temperature_FILT = _value;
+      return _field;
+    case 'H':
+      _humidity = _value;
+      return _field;
+
+    //  CO2 related
+    case 'z':
+      _CO2_RAW = _value;
+      return _field;
+    case 'Z':
+      _CO2_FILT = _value;
+      return _field;
+
+    //  OTHER
+    case 'h':
+      _zeroPoint = _value;
+      return _field;
+    case 'a':
+      _samples = _value;
+      return _field;
+    case '.':
+      _PPM = _value;
+      return _field;
+  }
+  return 0;
+}
+
+
 // -- END OF FILE --
+

libraries/Cozir/cozir.h

@@ -1,8 +1,7 @@
 #pragma once
 //
 //    FILE: Cozir.h
-//  AUTHOR: DirtGambit & Rob Tillaart
+// VERSION: 0.3.4
-// VERSION: 0.3.3
 // PURPOSE: library for COZIR range of sensors for Arduino
 //          Polling Mode
 //     URL: https://github.com/RobTillaart/Cozir
@@ -15,12 +14,15 @@
 #include "Arduino.h"
 
 
-#define COZIR_LIB_VERSION           (F("0.3.3"))
+#define COZIR_LIB_VERSION           (F("0.3.4"))
 
 
-// OUTPUTFIELDS
+// OUTPUT FIELDS
 // See datasheet for details.
 // These defines can be OR-ed for the SetOutputFields command
+//
+#define CZR_UNKNOWN_2               0x8000     // returns  P 00128  ? 
+#define CZR_UNKNOWN_1               0x4000     // returns  E 00016  ?
 #define CZR_LIGHT                   0x2000
 #define CZR_HUMIDITY                0x1000
 #define CZR_FILTLED                 0x0800
@@ -165,5 +167,78 @@ private:
 };
 
 
+
+////////////////////////////////////////////////////////////////////////////////
+//
+//  C0ZIRParser
+//
+//  used to parse the stream from a COZIR CO2 sensor.
+//  Note: one can comment fields / code not used to minimize footprint.
+//
+class C0ZIRParser
+{
+public:
+  C0ZIRParser();
+
+  void init();
+
+  // returns field char if a field is completed, 0 otherwise.
+  uint8_t nextChar(char c);
+
+  //  FETCH LAST READ VALUES
+  float    celsius();
+  float    fahrenheit()    { return (celsius() * 1.8) + 32; };
+  float    kelvin()        { return celsius() + 273.15; };
+  float    humidity()      { return 0.1 * _humidity; };
+
+  uint16_t light()         { return _light; };
+  uint16_t ledFilt()       { return _LED_FILT; };
+  uint16_t ledRaw()        { return _LED_RAW; };
+  uint16_t ledMax()        { return _LED_MAX; };
+  uint16_t ledSignalFilt() { return _LED_signal_FILT; };
+  uint16_t ledSignalRaw()  { return _LED_signal_RAW; };
+
+  uint16_t zeroPoint()     { return _zeroPoint; };
+  uint16_t tempFilt()      { return _temperature_FILT; };
+  uint16_t tempRaw()       { return _temperature_RAW; };
+  uint16_t tempSensor()    { return _temperature_Sensor; };
+
+  uint16_t CO2()           { return _CO2_FILT; };
+  uint16_t CO2Raw()        { return _CO2_RAW; };
+
+  uint16_t samples()       { return _samples; };
+  uint16_t getPPMFactor()  { return _PPM; }
+
+
+private:
+  //       FIELD                    ID character
+  uint16_t _light;              //  L
+  uint16_t _humidity;           //  H
+  uint16_t _LED_FILT;           //  D
+  uint16_t _LED_RAW;            //  d
+  uint16_t _LED_MAX;            //  l    // el not one
+  uint16_t _zeroPoint;          //  h
+  uint16_t _temperature_RAW;    //  V
+  uint16_t _temperature_FILT;   //  T
+  uint16_t _LED_signal_FILT;    //  o    // oo not zero
+  uint16_t _LED_signal_RAW;     //  O    // oo not zero
+  uint16_t _temperature_Sensor; //  v
+  uint16_t _CO2_FILT;           //  Z
+  uint16_t _CO2_RAW;            //  z
+
+  // not output fields sec but useful.
+  uint16_t _samples;            //  a
+  uint16_t _PPM;                //  .    // point
+
+
+  // parsing helpers
+  uint32_t _value;
+  uint8_t  _field;
+
+  // returns field char if a field is completed, 0 otherwise.
+  uint8_t store();
+};
+
+
 // -- END OF FILE --
 

libraries/Cozir/examples/Cozir_SWSerial_echo/Cozir_SWSerial_echo.ino

@@ -22,7 +22,7 @@ void setup()
 {
   sws.begin(9600);
 
-  Serial.begin(9600);
+  Serial.begin(115200);
   Serial.println(__FILE__);
   Serial.println();
 

libraries/Cozir/examples/Cozir_echo/Cozir_echo.ino

@@ -23,7 +23,7 @@ void setup()
 {
   Serial1.begin(9600);
 
-  Serial.begin(9600);
+  Serial.begin(115200);
   Serial.println(__FILE__);
   Serial.println();
 

libraries/Cozir/examples/Cozir_interactive/Cozir_interactive.ino

@@ -37,6 +37,9 @@ void loop()
     char c = Serial.read();
     switch (toupper(c))
     {
+      case '0':
+        czr.setOperatingMode(CZR_COMMAND);
+        break;
       case '1':
         czr.setOperatingMode(CZR_STREAMING);
         break;
@@ -118,6 +121,7 @@ void menu()
   Serial.println();
   Serial.println("-- COZIR GC0034 --");
   Serial.println();
+  Serial.println("  0 Command mode (low power)");
   Serial.println("  1 Continuous mode");
   Serial.println("  2 Polling mode");
   Serial.println();

libraries/Cozir/examples/Cozir_stream_CO2/.arduino-ci.yml

@@ -0,0 +1,11 @@
+compile:
+  # Choosing to run compilation tests on 2 different Arduino platforms
+  platforms:
+    # - uno
+    - due
+    # - zero
+    - leonardo
+    # - m4
+    # - esp32
+    # - esp8266
+    - mega2560

libraries/Cozir/examples/Cozir_stream_CO2/Cozir_stream_CO2.ino

@@ -0,0 +1,96 @@
+//
+//    FILE: Cozir_stream_CO2.ino
+//  AUTHOR: Rob Tillaart
+// PURPOSE: demo of Cozir lib - stand alone stream parsing.
+//     URL: https://github.com/RobTillaart/Cozir
+//          http://forum.arduino.cc/index.php?topic=91467.0
+//
+// Note: this sketch needs a MEGA or a Teensy that supports a second
+//       Serial port named Serial1
+//
+//  to be used with the Serial Plotter.
+
+
+#include "Arduino.h"
+#include "cozir.h"
+
+COZIR czr(&Serial1);
+
+
+uint32_t F_CO2 = 0;       //  CO2  FILTERED
+uint32_t R_CO2 = 0;       //  CO2  RAW
+uint32_t tmp = 0;         //  temporary buffer
+
+//  0 = none
+//  Z = filtered co2
+//  z = raw co2
+uint8_t field = 0;        //  which field is parsed
+
+uint32_t lastPrint = 0;   //  last time fields are displayed.
+
+
+void setup()
+{
+  Serial1.begin(9600);
+  czr.init();
+
+  Serial.begin(115200);
+  // Serial.print("COZIR_LIB_VERSION: ");
+  // Serial.println(COZIR_LIB_VERSION);
+  // Serial.println();
+
+  Serial.print("FILTERED\t");
+  Serial.println("RAW");
+  Serial.println();
+
+  // set to streaming explicitly.
+  czr.setOperatingMode(CZR_STREAMING);
+  // set digifilter on an average value
+  czr.setDigiFilter(16);
+  // select RAW and FILTERED CO2
+  czr.setOutputFields(CZR_DEFAULT);
+  delay(1000);
+}
+
+
+void loop()
+{
+  if (Serial1.available())
+  {
+    char c = Serial1.read();
+    switch (c)
+    {
+      case 'Z':   // FILTERED CO2
+        field = 'Z';
+        break;
+      case 'z':   // RAW CO2
+        field = 'z';
+        break;
+      case '0' ... '9':
+        tmp *= 10;
+        tmp += c - '0';
+        break;
+      case ' ':
+      case '\n':
+      case '\r':
+        if (tmp > 0 && field == 'Z') F_CO2 = tmp;
+        if (tmp > 0 && field == 'z') R_CO2 = tmp;
+        tmp = 0;
+        break;
+      default:
+        break;
+    }
+  }
+
+  if (millis() - lastPrint > 500)
+  {
+    lastPrint += 500;
+    Serial.print(F_CO2);
+    Serial.print("\t");
+    Serial.print(R_CO2);
+    Serial.println();
+  }
+}
+
+
+// -- END OF FILE --

libraries/Cozir/examples/Cozir_stream_parse/.arduino-ci.yml

@@ -0,0 +1,11 @@
+compile:
+  # Choosing to run compilation tests on 2 different Arduino platforms
+  platforms:
+    # - uno
+    - due
+    # - zero
+    - leonardo
+    # - m4
+    # - esp32
+    # - esp8266
+    - mega2560

libraries/Cozir/examples/Cozir_stream_parse/Cozir_stream_parse.ino

@@ -0,0 +1,80 @@
+//
+//    FILE: Cozir_stream_parse.ino
+//  AUTHOR: Rob Tillaart
+// PURPOSE: demo of Cozir lib
+//     URL: https://github.com/RobTillaart/Cozir
+//          http://forum.arduino.cc/index.php?topic=91467.0
+//
+// Note: this sketch needs a MEGA or a Teensy that supports a second
+//       Serial port named Serial1
+//
+//  to be used with the Serial Plotter.
+
+
+#include "Arduino.h"
+#include "cozir.h"
+
+COZIR czr(&Serial1);
+C0ZIRParser czrp;
+
+
+uint32_t F_CO2 = 0;       //  CO2  FILTERED
+uint32_t R_CO2 = 0;       //  CO2  RAW
+uint32_t tmp = 0;         //  temporary buffer
+
+//  0 = none
+//  Z = filtered co2
+//  z = raw co2
+uint8_t field = 0;        //  which field is parsed
+
+uint32_t lastPrint = 0;   //  last time fields are displayed.
+
+
+void setup()
+{
+  Serial1.begin(9600);
+  czr.init();
+
+  Serial.begin(115200);
+  // Serial.print("COZIR_LIB_VERSION: ");
+  // Serial.println(COZIR_LIB_VERSION);
+  // Serial.println();
+
+  Serial.print("FILTERED\t");
+  Serial.println("RAW");
+  Serial.println();
+
+  // set to streaming explicitly.
+  czr.setOperatingMode(CZR_STREAMING);
+  // set digifilter on an average value
+  czr.setDigiFilter(16);
+  // select RAW and FILTERED CO2
+  czr.setOutputFields(CZR_DEFAULT);
+  // czr.setOutputFields(CZR_HUMIDITY | CZR_RAWTEMP | CZR_RAWCO2);
+  delay(1000);
+}
+
+
+void loop()
+{
+  if (Serial1.available())
+  {
+    char c = Serial1.read();
+    field = czrp.nextChar(c);
+    if (field != 0)
+    {
+      // shows all values
+      // Serial.print(czrp.celsius());
+      // Serial.print("\t");
+      // Serial.print(czrp.humidity());
+      // Serial.print("\t");
+      Serial.print(czrp.CO2());
+      Serial.print("\t");
+      Serial.print(czrp.CO2Raw());
+      Serial.println();
+    }
+  }
+}
+
+
+// -- END OF FILE --

libraries/Cozir/keywords.txt

@@ -2,6 +2,7 @@
 
 # Data types (KEYWORD1)
 COZIR	KEYWORD1
+C0ZIRParser	KEYWORD1
 
 
 # Methods and Functions (KEYWORD2)
@@ -58,7 +59,7 @@ getConfiguration	KEYWORD2
 COZIR_LIB_VERSION	LITERAL1
 
 
-# OUTPPUTFIELDS
+# OUTPUT FIELDS
 
 CZR_LIGHT	LITERAL1
 CZR_HUMIDITY	LITERAL1
@@ -74,6 +75,7 @@ CZR_SENSTEMP	LITERAL1
 CZR_FILTCO2	LITERAL1
 CZR_RAWCO2	LITERAL1
 CZR_NONE	LITERAL1
+CZR_DEFAULT	LITERAL1
 CZR_HTC	LITERAL1
 CZR_ALL	LITERAL1
 

libraries/Cozir/library.json

@@ -18,7 +18,7 @@
     "type": "git",
     "url": "https://github.com/RobTillaart/Cozir.git"
   },
-  "version": "0.3.3",
+  "version": "0.3.4",
   "license": "MIT",
   "frameworks": "arduino",
   "platforms": "*",

libraries/Cozir/library.properties

@@ -1,5 +1,5 @@
 name=Cozir
-version=0.3.3
+version=0.3.4
 author=Rob Tillaart <rob.tillaart@gmail.com>, DirtGambit
 maintainer=Rob Tillaart <rob.tillaart@gmail.com>
 sentence=Arduino library for COZIR range of CO2 sensors. Polling mode only.