From d1196960826810bfbb5b4a05a82e68ae32fdc1da Mon Sep 17 00:00:00 2001 From: rob tillaart Date: Tue, 25 Oct 2022 20:56:18 +0200 Subject: [PATCH] 0.1.8 AD5144A --- libraries/AD5144A/.arduino-ci.yml | 19 +++++- libraries/AD5144A/AD5144A.cpp | 66 +++++++++---------- libraries/AD5144A/AD5144A.h | 4 +- libraries/AD5144A/CHANGELOG.md | 51 ++------------ libraries/AD5144A/README.md | 12 ++-- .../AD5144A_low_level/AD5144A_low_level.ino | 6 +- .../AD5144A_test_EEPROM.ino | 9 ++- .../AD5144A_test_control_register.ino | 5 +- .../AD5144A_test_isConnected.ino | 6 +- .../AD5144A_test_performance.ino | 7 +- .../AD5144A_test_preload_sync.ino | 8 +-- .../AD5144A_test_speed/AD5144A_test_speed.ino | 5 +- .../AD5144A_test_write/AD5144A_test_write.ino | 10 +-- .../AD5144A_test_writeAll.ino | 6 +- libraries/AD5144A/library.json | 2 +- libraries/AD5144A/library.properties | 2 +- libraries/AD5144A/test/unit_test_001.cpp | 6 +- 17 files changed, 99 insertions(+), 125 deletions(-) diff --git a/libraries/AD5144A/.arduino-ci.yml b/libraries/AD5144A/.arduino-ci.yml index e7cb4633..10c0e10b 100644 --- a/libraries/AD5144A/.arduino-ci.yml +++ b/libraries/AD5144A/.arduino-ci.yml @@ -1,3 +1,18 @@ +platforms: + rpipico: + board: rp2040:rp2040:rpipico + package: rp2040:rp2040 + gcc: + features: + defines: + - ARDUINO_ARCH_RP2040 + warnings: + flags: + +packages: + rp2040:rp2040: + url: https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json + compile: # Choosing to run compilation tests on 2 different Arduino platforms platforms: @@ -8,4 +23,6 @@ compile: - m4 - esp32 # - esp8266 - # - mega2560 \ No newline at end of file + # - mega2560 + - rpipico + diff --git a/libraries/AD5144A/AD5144A.cpp b/libraries/AD5144A/AD5144A.cpp index 65a13468..7cdef851 100644 --- a/libraries/AD5144A/AD5144A.cpp +++ b/libraries/AD5144A/AD5144A.cpp @@ -1,7 +1,7 @@ // // FILE: AD5144A.cpp // AUTHOR: Rob Tillaart -// VERSION: 0.1.6 +// VERSION: 0.1.8 // PURPOSE: I2C digital potentiometer AD5144A // DATE: 2021-04-30 // URL: https://github.com/RobTillaart/AD5144A @@ -63,15 +63,15 @@ bool AD51XX::isConnected() uint8_t AD51XX::reset() { - // COMMAND 14 - page 29 - return send(0xB0, 0x00); // to be tested + // COMMAND 14 - page 29 + return send(0xB0, 0x00); // to be tested } uint8_t AD51XX::writeAll(const uint8_t value) { if (value > _maxValue) return AD51XXA_INVALID_VALUE; - // COMMAND 1 - page 29 + // COMMAND 1 - page 29 for (uint8_t pm = 0; pm < _potCount; pm++) { _lastValue[pm] = value; @@ -83,7 +83,7 @@ uint8_t AD51XX::writeAll(const uint8_t value) uint8_t AD51XX::write(const uint8_t rdac, const uint8_t value) { - // COMMAND 1 - page 29 + // COMMAND 1 - page 29 if (rdac >= _potCount) return AD51XXA_INVALID_POT; if (value > _maxValue) return AD51XXA_INVALID_VALUE; _lastValue[rdac] = value; @@ -94,7 +94,7 @@ uint8_t AD51XX::write(const uint8_t rdac, const uint8_t value) uint8_t AD51XX::storeEEPROM(const uint8_t rdac) { - // COMMAND 9 - page 29 + // COMMAND 9 - page 29 if (rdac >= _potCount) return AD51XXA_INVALID_POT; uint8_t cmd = 0x70 | rdac; return send(cmd, 0x01); @@ -103,7 +103,7 @@ uint8_t AD51XX::storeEEPROM(const uint8_t rdac) uint8_t AD51XX::recallEEPROM(const uint8_t rdac) { - // COMMAND 10 - page 29 + // COMMAND 10 - page 29 if (rdac >= _potCount) return AD51XXA_INVALID_POT; _lastValue[rdac] = readBackEEPROM(rdac); uint8_t cmd = 0x70 | rdac; @@ -113,7 +113,7 @@ uint8_t AD51XX::recallEEPROM(const uint8_t rdac) uint8_t AD51XX::storeEEPROM(const uint8_t rdac, const uint8_t value) { - // COMMAND 11 - page 29 + // COMMAND 11 - page 29 if (rdac >= _potCount) return AD51XXA_INVALID_POT; if (value > _maxValue) return AD51XXA_INVALID_VALUE; uint8_t cmd = 0x80 | rdac; @@ -151,7 +151,7 @@ uint8_t AD51XX::setTopScaleAll() uint8_t AD51XX::clrTopScaleAll() { - // COMMAND 12 + // COMMAND 12 uint8_t cmd = 0x98; return send(cmd, 0x80); } @@ -159,7 +159,7 @@ uint8_t AD51XX::clrTopScaleAll() uint8_t AD51XX::setBottomScale(const uint8_t rdac) { - // COMMAND 13 + // COMMAND 13 if (rdac >= _potCount) return AD51XXA_INVALID_POT; uint8_t cmd = 0x90 | rdac; return send(cmd, 0x01); @@ -167,7 +167,7 @@ uint8_t AD51XX::setBottomScale(const uint8_t rdac) uint8_t AD51XX::clrBottomScale(const uint8_t rdac) -{ +{ // COMMAND 13 if (rdac >= _potCount) return AD51XXA_INVALID_POT; uint8_t cmd = 0x90 | rdac; @@ -177,7 +177,7 @@ uint8_t AD51XX::clrBottomScale(const uint8_t rdac) uint8_t AD51XX::setBottomScaleAll() { - // COMMAND 13 + // COMMAND 13 uint8_t cmd = 0x98; return send(cmd, 0x01); } @@ -185,7 +185,7 @@ uint8_t AD51XX::setBottomScaleAll() uint8_t AD51XX::clrBottomScaleAll() { - // COMMAND 13 + // COMMAND 13 uint8_t cmd = 0x98; return send(cmd, 0x00); } @@ -195,9 +195,9 @@ uint8_t AD51XX::clrBottomScaleAll() uint8_t AD51XX::setLinearMode(const uint8_t rdac) { - // COMMAND 3 + // COMMAND 3 uint8_t mask = readBack(rdac, 0x02); - // COMMAND 16 - page 29 + // COMMAND 16 - page 29 uint8_t cmd = 0xD0; return send(cmd, mask | 0x04); } @@ -205,9 +205,9 @@ uint8_t AD51XX::setLinearMode(const uint8_t rdac) uint8_t AD51XX::setPotentiometerMode(const uint8_t rdac) { - // COMMAND 3 + // COMMAND 3 uint8_t mask = readBack(rdac, 0x02); - // COMMAND 16 - page 29 + // COMMAND 16 - page 29 uint8_t cmd = 0xD0; return send(cmd, mask & (~0x04)); } @@ -222,7 +222,7 @@ uint8_t AD51XX::getOperationalMode(const uint8_t rdac) uint8_t AD51XX::incrementLinear(const uint8_t rdac) { - // COMMAND 4 + // COMMAND 4 if (rdac >= _potCount) return AD51XXA_INVALID_POT; uint8_t cmd = 0x40 | rdac; return send(cmd, 0x01); @@ -231,7 +231,7 @@ uint8_t AD51XX::incrementLinear(const uint8_t rdac) uint8_t AD51XX::incrementLinearAll() { - // COMMAND 4 + // COMMAND 4 uint8_t cmd = 0x48; return send(cmd, 0x01); } @@ -239,7 +239,7 @@ uint8_t AD51XX::incrementLinearAll() uint8_t AD51XX::decrementLineair(const uint8_t rdac) { - // COMMAND 4 + // COMMAND 4 if (rdac >= _potCount) return AD51XXA_INVALID_POT; uint8_t cmd = 0x40 | rdac; return send(cmd, 0x00); @@ -248,7 +248,7 @@ uint8_t AD51XX::decrementLineair(const uint8_t rdac) uint8_t AD51XX::decrementLineairAll() { - // COMMAND 4 + // COMMAND 4 uint8_t cmd = 0x48; return send(cmd, 0x00); } @@ -256,7 +256,7 @@ uint8_t AD51XX::decrementLineairAll() uint8_t AD51XX::increment6dB(const uint8_t rdac) { - // COMMAND 5 + // COMMAND 5 if (rdac >= _potCount) return AD51XXA_INVALID_POT; uint8_t cmd = 0x50 | rdac; return send(cmd, 0x01); @@ -265,7 +265,7 @@ uint8_t AD51XX::increment6dB(const uint8_t rdac) uint8_t AD51XX::increment6dBAll() { - // COMMAND 5 + // COMMAND 5 uint8_t cmd = 0x58; return send(cmd, 0x01); } @@ -273,7 +273,7 @@ uint8_t AD51XX::increment6dBAll() uint8_t AD51XX::decrement6dB(const uint8_t rdac) { - // COMMAND 5 + // COMMAND 5 if (rdac >= _potCount) return AD51XXA_INVALID_POT; uint8_t cmd = 0x50 | rdac; return send(cmd, 0x00); @@ -282,7 +282,7 @@ uint8_t AD51XX::decrement6dB(const uint8_t rdac) uint8_t AD51XX::decrement6dBAll() { - // COMMAND 5 + // COMMAND 5 uint8_t cmd = 0x58; return send(cmd, 0x00); } @@ -292,7 +292,7 @@ uint8_t AD51XX::decrement6dBAll() uint8_t AD51XX::preload(const uint8_t rdac, const uint8_t value) { - // COMMAND 2 - page 29 + // COMMAND 2 - page 29 if (rdac >= _potCount) return AD51XXA_INVALID_POT; if (value > _maxValue) return AD51XXA_INVALID_VALUE; uint8_t cmd = 0x20 | rdac; @@ -303,7 +303,7 @@ uint8_t AD51XX::preload(const uint8_t rdac, const uint8_t value) uint8_t AD51XX::preloadAll(const uint8_t value) { if (value > _maxValue) return AD51XXA_INVALID_VALUE; - // COMMAND 2 - page 29 + // COMMAND 2 - page 29 uint8_t cmd = 0x28; return send(cmd, value); } @@ -311,10 +311,10 @@ uint8_t AD51XX::preloadAll(const uint8_t value) uint8_t AD51XX::sync(const uint8_t mask) { - // COMMAND 8 - page 29 + // COMMAND 8 - page 29 uint8_t cmd = 0x60 | mask; return send(cmd, 0x00); - // keep cache correct. + // keep cache correct. uint8_t m = 0x01; for (uint8_t rdac = 0; rdac < _potCount; rdac++) { @@ -337,7 +337,7 @@ uint8_t AD51XX::shutDown() uint8_t AD51XX::writeControlRegister(uint8_t mask) { - // COMMAND 16 - page 29 + // COMMAND 16 - page 29 uint8_t cmd = 0xD0; return send(cmd, mask); } @@ -345,7 +345,7 @@ uint8_t AD51XX::writeControlRegister(uint8_t mask) ///////////////////////////////////////////////////////////////////////////// // -// PRIVATE +// PRIVATE // // // _wire->endTransmission @@ -358,7 +358,7 @@ uint8_t AD51XX::writeControlRegister(uint8_t mask) // uint8_t AD51XX::send(const uint8_t cmd, const uint8_t value) { - // COMMAND 1 - page 20 + // COMMAND 1 - page 20 _wire->beginTransmission(_address); // returns nothing. _wire->write(cmd); // returns bytes written _wire->write(value); // returns bytes written @@ -368,7 +368,7 @@ uint8_t AD51XX::send(const uint8_t cmd, const uint8_t value) uint8_t AD51XX::readBack(const uint8_t rdac, const uint8_t mask) { - // COMMAND 3 - page 20 + // COMMAND 3 - page 20 _wire->beginTransmission(_address); _wire->write(0x30 | rdac); _wire->write(mask); diff --git a/libraries/AD5144A/AD5144A.h b/libraries/AD5144A/AD5144A.h index 4ddbe220..ca46c0f5 100644 --- a/libraries/AD5144A/AD5144A.h +++ b/libraries/AD5144A/AD5144A.h @@ -2,7 +2,7 @@ // // FILE: AD5144A.h // AUTHOR: Rob Tillaart -// VERSION: 0.1.7 +// VERSION: 0.1.8 // PURPOSE: I2C digital PotentioMeter AD5144A // DATE: 2021-04-30 // URL: https://github.com/RobTillaart/AD5144A @@ -13,7 +13,7 @@ #include "Wire.h" -#define AD51XXA_VERSION (F("0.1.7")) +#define AD51XXA_VERSION (F("0.1.8")) #define AD51XXA_OK 0 diff --git a/libraries/AD5144A/CHANGELOG.md b/libraries/AD5144A/CHANGELOG.md index 0f416ff9..def30a7b 100644 --- a/libraries/AD5144A/CHANGELOG.md +++ b/libraries/AD5144A/CHANGELOG.md @@ -5,89 +5,52 @@ The format is based on [Keep a Changelog](http://keepachangelog.com/) and this project adheres to [Semantic Versioning](http://semver.org/). -## [0.1.7] - 2022-06-21 +## [0.1.8] - 2022-10-25 +- add rp2040 to build +- redo comments +- clean up examples + +## [0.1.7] - 2022-06-21 - fix ESP32 Wire.begin datatype ## [0.1.6] - 2022-04-25 - -### Added - extra comments on **sync()** - -### Changed - -### Fixed - fixed issue #14, preloading values should not change cached values ## [0.1.5] - 2022-03-14 - -### Added - CHANGELOG.md: moved history from AD5144A.cpp to this file. - fix #12 always call reset in begin(). -- add flag to **begin(bool doReset = true)** to explcitly disable the reset +- add flag to **begin(bool doReset = true)** to explicitly disable the reset call. The default is true ==> backwards compatibility / normal use. - -### Changed - updated readme.md -### Fixed - ## [0.1.4] - 2021-12-10 - -### Added - add check for maxValue in code. - -### Changed - remove experimental from version string. - add headers to library.json, - minor edits readme, license, -### Fixed - ## [0.1.3] - 2021-10-17 - -### Added - -### Changed - update build-ci - improve readme.md -### Fixed - ## [0.1.2] - 2021-05-12 - -### Added - add increment() - add decrement() -### Changed - -### Fixed - ## [0.1.1] - 2021-05-12 - -### Added - add topScale() - add bottomScale() -### Changed - -### Fixed - ## [0.1.0] - 2021-04-30 - -### Added - initial version -### Changed - -### Fixed - diff --git a/libraries/AD5144A/README.md b/libraries/AD5144A/README.md index 9383e030..e68e0852 100644 --- a/libraries/AD5144A/README.md +++ b/libraries/AD5144A/README.md @@ -45,7 +45,7 @@ See Future below. ### Type AD51xy decomposition -- x = 2 => range = 0..127 +- x = 2 => range = 0..127 - x = 4 => range = 0..255 - y = 1 => 1 potentiometer - y = 2 => 2 potentiometers @@ -56,6 +56,7 @@ See Future below. ## I2C For the selection of the address, see table 12 / 13 datasheet. +Typical 0x28, 0x2A or 0x2B. The AD5144A devices support standard 100 kHz, and fast 400 kHz, data transfer modes. @@ -87,7 +88,6 @@ The developer is responsible for handling these differences correctly when using - **AD5141(uint8_t address, TwoWire \*wire = &Wire)** - ### I2C / device initialization - **bool begin(int dataPin, int clockPin, bool doReset = true)** ESP32 a.o initializing of the I2C data and clock pins. @@ -105,7 +105,6 @@ This loads the last values stored in EEPROM in the RDAC's. Factory default is **midScale()** check datasheet for details. - ### Basic IO Used to set one channel at the time. @@ -221,13 +220,16 @@ The examples show the basic working of the functions. ## Future -**must** +#### must + - update documentation - some functions can be performance optimized - writing a value is not needed if last value is the same? -**could** +#### could + - improve unit testing CI +- **stereo**, write one value to two channels. - more testing with hardware. - SPI based version of the library ? diff --git a/libraries/AD5144A/examples/AD5144A_low_level/AD5144A_low_level.ino b/libraries/AD5144A/examples/AD5144A_low_level/AD5144A_low_level.ino index 3d222e10..9be03fe9 100644 --- a/libraries/AD5144A/examples/AD5144A_low_level/AD5144A_low_level.ino +++ b/libraries/AD5144A/examples/AD5144A_low_level/AD5144A_low_level.ino @@ -2,12 +2,10 @@ // FILE: AD5144A_low_level.ino // AUTHOR: Rob Tillaart // PURPOSE: test low level IO -// DATE: 2021-05-04 // URL: https://github.com/RobTillaart/AD5144A - -// THIS IS A LOW LEVEL WRITE TEST FOR AD5144A -// IT DOES NOT USE THE LIBRARY +// THIS IS A LOW LEVEL WRITE TEST FOR AD5144A +// IT DOES NOT USE THE LIBRARY #include "Arduino.h" diff --git a/libraries/AD5144A/examples/AD5144A_test_EEPROM/AD5144A_test_EEPROM.ino b/libraries/AD5144A/examples/AD5144A_test_EEPROM/AD5144A_test_EEPROM.ino index 0339c679..1d71b70b 100644 --- a/libraries/AD5144A/examples/AD5144A_test_EEPROM/AD5144A_test_EEPROM.ino +++ b/libraries/AD5144A/examples/AD5144A_test_EEPROM/AD5144A_test_EEPROM.ino @@ -2,14 +2,13 @@ // FILE: AD5144A_test_EEPROM.ino // AUTHOR: Rob Tillaart // PURPOSE: test EEPROM functions -// DATE: 2021-05-04 // URL: https://github.com/RobTillaart/AD5144A #include "AD5144A.h" -// select the right type -// adjust address +// select the right type +// adjust address AD5144A AD(0x77); @@ -25,7 +24,7 @@ void setup() return; } - // values should be same after start + // values should be same after start for (int ch = 0; ch < AD.pmCount(); ch++) { Serial.print(ch); @@ -36,7 +35,7 @@ void setup() Serial.println(); } - // update values for after next (full) power up. + // update values for after next (full) power up. for (int ch = 0; ch < AD.pmCount(); ch++) { uint8_t val = AD.recallEEPROM(ch); diff --git a/libraries/AD5144A/examples/AD5144A_test_control_register/AD5144A_test_control_register.ino b/libraries/AD5144A/examples/AD5144A_test_control_register/AD5144A_test_control_register.ino index 244812dc..510b7ce1 100644 --- a/libraries/AD5144A/examples/AD5144A_test_control_register/AD5144A_test_control_register.ino +++ b/libraries/AD5144A/examples/AD5144A_test_control_register/AD5144A_test_control_register.ino @@ -2,14 +2,13 @@ // FILE: AD5144A_test_control_register.ino // AUTHOR: Rob Tillaart // PURPOSE: read CONTROL REGISTER functions -// DATE: 2021-05-04 // URL: https://github.com/RobTillaart/AD5144A #include "AD5144A.h" -// select the right type -// adjust address +// select the right type +// adjust address AD5144A AD(0x77); diff --git a/libraries/AD5144A/examples/AD5144A_test_isConnected/AD5144A_test_isConnected.ino b/libraries/AD5144A/examples/AD5144A_test_isConnected/AD5144A_test_isConnected.ino index 431bfa99..ab02ed54 100644 --- a/libraries/AD5144A/examples/AD5144A_test_isConnected/AD5144A_test_isConnected.ino +++ b/libraries/AD5144A/examples/AD5144A_test_isConnected/AD5144A_test_isConnected.ino @@ -2,14 +2,13 @@ // FILE: AD5144A_test_isConnected.ino // AUTHOR: Rob Tillaart // PURPOSE: check isConnected() -// DATE: 2021-05-04 // URL: https://github.com/RobTillaart/AD5144A #include "AD5144A.h" -// select the right type -// adjust address if needed +// select the right type +// adjust address if needed AD5144A AD(0x77); @@ -41,3 +40,4 @@ void loop() // -- END OF FILE -- + diff --git a/libraries/AD5144A/examples/AD5144A_test_performance/AD5144A_test_performance.ino b/libraries/AD5144A/examples/AD5144A_test_performance/AD5144A_test_performance.ino index 7fae5250..b1badd2d 100644 --- a/libraries/AD5144A/examples/AD5144A_test_performance/AD5144A_test_performance.ino +++ b/libraries/AD5144A/examples/AD5144A_test_performance/AD5144A_test_performance.ino @@ -2,14 +2,13 @@ // FILE: AD5144A_test_performance.ino // AUTHOR: Rob Tillaart // PURPOSE: indication performance methods of the class -// DATE: 2021-04-30 // URL: https://github.com/RobTillaart/AD5144A #include "AD5144A.h" -// select the right type -// adjust address +// select the right type +// adjust address AD5144A AD(0x77); uint32_t start, stop; @@ -106,7 +105,7 @@ void test_midScaleAll() } -void test_zeroAll() // todo test +void test_zeroAll() // todo test { Serial.println(); Serial.println(__FUNCTION__); diff --git a/libraries/AD5144A/examples/AD5144A_test_preload_sync/AD5144A_test_preload_sync.ino b/libraries/AD5144A/examples/AD5144A_test_preload_sync/AD5144A_test_preload_sync.ino index 80910d1f..1616fcf8 100644 --- a/libraries/AD5144A/examples/AD5144A_test_preload_sync/AD5144A_test_preload_sync.ino +++ b/libraries/AD5144A/examples/AD5144A_test_preload_sync/AD5144A_test_preload_sync.ino @@ -6,14 +6,14 @@ // URL: https://github.com/RobTillaart/AD5144A -// connect the AD5144A to a multichannel scope -// to verify the potentiometers change at the same time +// connect the AD5144A to a multichannel scope +// to verify the potentiometers change at the same time #include "AD5144A.h" -// select the right type -// adjust address +// select the right type +// adjust address AD5144A AD(0x77); diff --git a/libraries/AD5144A/examples/AD5144A_test_speed/AD5144A_test_speed.ino b/libraries/AD5144A/examples/AD5144A_test_speed/AD5144A_test_speed.ino index 05124b28..6429673f 100644 --- a/libraries/AD5144A/examples/AD5144A_test_speed/AD5144A_test_speed.ino +++ b/libraries/AD5144A/examples/AD5144A_test_speed/AD5144A_test_speed.ino @@ -2,14 +2,13 @@ // FILE: AD5144A_test_speed.ino // AUTHOR: Rob Tillaart // PURPOSE: demo -// DATE: 2021-04-30 // URL: https://github.com/RobTillaart/AD5144A #include "AD5144A.h" -// select the right type -// adjust address +// select the right type +// adjust address AD5144A AD(0x77); diff --git a/libraries/AD5144A/examples/AD5144A_test_write/AD5144A_test_write.ino b/libraries/AD5144A/examples/AD5144A_test_write/AD5144A_test_write.ino index c1888c1d..7e529bd8 100644 --- a/libraries/AD5144A/examples/AD5144A_test_write/AD5144A_test_write.ino +++ b/libraries/AD5144A/examples/AD5144A_test_write/AD5144A_test_write.ino @@ -2,14 +2,13 @@ // FILE: AD5144A_test_write.ino // AUTHOR: Rob Tillaart // PURPOSE: demo -// DATE: 2021-04-30 // URL: https://github.com/RobTillaart/AD5144A #include "AD5144A.h" -// select the right type -// adjust address +// select the right type +// adjust address AD5144A AD(0x77); @@ -25,8 +24,8 @@ void setup() return; } - // will generate 20+ lines - // decrease step 50 to 1 to test all + // will generate 20+ lines + // decrease step 50 to 1 to test all for (int val = 0; val < 256; val+= 50) { for (int p = 0; p < AD.pmCount(); p++) @@ -53,3 +52,4 @@ void loop() // -- END OF FILE -- + diff --git a/libraries/AD5144A/examples/AD5144A_test_writeAll/AD5144A_test_writeAll.ino b/libraries/AD5144A/examples/AD5144A_test_writeAll/AD5144A_test_writeAll.ino index 3f5f4eb3..454f1aeb 100644 --- a/libraries/AD5144A/examples/AD5144A_test_writeAll/AD5144A_test_writeAll.ino +++ b/libraries/AD5144A/examples/AD5144A_test_writeAll/AD5144A_test_writeAll.ino @@ -2,14 +2,13 @@ // FILE: AD5144A_test_writeAll.ino // AUTHOR: Rob Tillaart // PURPOSE: test writeAll + wrappers -// DATE: 2021-05-04 // URL: https://github.com/RobTillaart/AD5144A #include "AD5144A.h" -// select the right type -// adjust address +// select the right type +// adjust address AD5144A AD(0x77); @@ -118,3 +117,4 @@ void test_maxAll() // -- END OF FILE -- + diff --git a/libraries/AD5144A/library.json b/libraries/AD5144A/library.json index 72a127ad..5f0e812f 100644 --- a/libraries/AD5144A/library.json +++ b/libraries/AD5144A/library.json @@ -15,7 +15,7 @@ "type": "git", "url": "https://github.com/RobTillaart/AD5144A.git" }, - "version": "0.1.7", + "version": "0.1.8", "license": "MIT", "frameworks": "arduino", "platforms": "*", diff --git a/libraries/AD5144A/library.properties b/libraries/AD5144A/library.properties index 602b68b2..4bea18f1 100644 --- a/libraries/AD5144A/library.properties +++ b/libraries/AD5144A/library.properties @@ -1,5 +1,5 @@ name=AD5144A -version=0.1.7 +version=0.1.8 author=Rob Tillaart maintainer=Rob Tillaart sentence=Arduino Library for AD5144A 4 Channel digital potentiometer diff --git a/libraries/AD5144A/test/unit_test_001.cpp b/libraries/AD5144A/test/unit_test_001.cpp index 805fbdad..849f4fe9 100644 --- a/libraries/AD5144A/test/unit_test_001.cpp +++ b/libraries/AD5144A/test/unit_test_001.cpp @@ -27,6 +27,7 @@ unittest_setup() { + fprintf(stderr, "AD51XXA_VERSION: %s\n", (char *) AD51XXA_VERSION); } @@ -37,14 +38,12 @@ unittest_teardown() unittest(test_constructors) { - fprintf(stderr, "AD51XXA_VERSION: %s\n", (char *) AD51XXA_VERSION); - Wire.begin(); AD5123 AD23(0x2C); assertEqual( 4, AD23.pmCount()); assertEqual(127, AD23.maxValue()); - // assertEqual(0, AD23.read()) // todo + // assertEqual(0, AD23.read()) // todo AD5124 AD24(0x2C); assertEqual( 4, AD24.pmCount()); @@ -86,7 +85,6 @@ unittest(test_constants) assertEqual(100, AD51XXA_ERROR); assertEqual(101, AD51XXA_INVALID_POT); assertEqual(102, AD51XXA_INVALID_VALUE); - }