diff --git a/libraries/BH1750FVI_RT/.github/FUNDING.yml b/libraries/BH1750FVI_RT/.github/FUNDING.yml index 90d9ab4c..2859c159 100644 --- a/libraries/BH1750FVI_RT/.github/FUNDING.yml +++ b/libraries/BH1750FVI_RT/.github/FUNDING.yml @@ -1,4 +1,5 @@ # These are supported funding model platforms -github: RobTillaart +github: RobTillaart +custom: "https://www.paypal.me/robtillaart" diff --git a/libraries/BH1750FVI_RT/.github/workflows/arduino-lint.yml b/libraries/BH1750FVI_RT/.github/workflows/arduino-lint.yml index 8a26f14a..a7490f1d 100644 --- a/libraries/BH1750FVI_RT/.github/workflows/arduino-lint.yml +++ b/libraries/BH1750FVI_RT/.github/workflows/arduino-lint.yml @@ -1,12 +1,12 @@ - name: Arduino-lint on: [push, pull_request] jobs: lint: runs-on: ubuntu-latest + timeout-minutes: 5 steps: - - uses: actions/checkout@v3 + - uses: actions/checkout@v4 - uses: arduino/arduino-lint-action@v1 with: library-manager: update diff --git a/libraries/BH1750FVI_RT/.github/workflows/arduino_test_runner.yml b/libraries/BH1750FVI_RT/.github/workflows/arduino_test_runner.yml index fadfa904..dbd0ce79 100644 --- a/libraries/BH1750FVI_RT/.github/workflows/arduino_test_runner.yml +++ b/libraries/BH1750FVI_RT/.github/workflows/arduino_test_runner.yml @@ -1,4 +1,3 @@ ---- name: Arduino CI on: [push, pull_request] @@ -6,9 +5,10 @@ on: [push, pull_request] jobs: runTest: runs-on: ubuntu-latest + timeout-minutes: 20 steps: - - uses: actions/checkout@v3 + - uses: actions/checkout@v4 - uses: ruby/setup-ruby@v1 with: ruby-version: 2.6 diff --git a/libraries/BH1750FVI_RT/.github/workflows/jsoncheck.yml b/libraries/BH1750FVI_RT/.github/workflows/jsoncheck.yml index 37a11298..fd05f5f8 100644 --- a/libraries/BH1750FVI_RT/.github/workflows/jsoncheck.yml +++ b/libraries/BH1750FVI_RT/.github/workflows/jsoncheck.yml @@ -9,10 +9,11 @@ on: jobs: test: runs-on: ubuntu-latest + timeout-minutes: 5 steps: - - uses: actions/checkout@v3 + - uses: actions/checkout@v4 - name: json-syntax-check - uses: limitusus/json-syntax-check@v1 + uses: limitusus/json-syntax-check@v2 with: pattern: "\\.json$" diff --git a/libraries/BH1750FVI_RT/BH1750FVI.cpp b/libraries/BH1750FVI_RT/BH1750FVI.cpp index 64b2f143..5d1d3dac 100644 --- a/libraries/BH1750FVI_RT/BH1750FVI.cpp +++ b/libraries/BH1750FVI_RT/BH1750FVI.cpp @@ -1,9 +1,9 @@ // // FILE: BH1750FVI.cpp // AUTHOR: Rob Tillaart -// VERSION: 0.3.0 +// VERSION: 0.3.1 // PURPOSE: library for BH1750FVI lux sensor Arduino -// URL: https://github.com/RobTillaart/BH1750FVI +// URL: https://github.com/RobTillaart/BH1750FVI_RT #include "BH1750FVI.h" @@ -65,7 +65,7 @@ bool BH1750FVI::isReady() float BH1750FVI::getRaw(void) { - return readData() * 0.833333333333f; // == 1 / 1.2; + return readData() * 0.833333333333f; // == 1 / 1.2; } @@ -96,7 +96,7 @@ float BH1750FVI::getLux(void) } if (_mode == BH1750FVI_MODE_HIGH2) { - lux *= 0.5f; // P11 + lux *= 0.5f; // P11 } return lux; } @@ -225,13 +225,13 @@ float BH1750FVI::setTemperature(int temp) float BH1750FVI::setAngle(int degrees) { _angle = constrain(degrees, -89, 89); - // Lamberts Law. + // Lambert's Law. _angleFactor = 1.0f / cos(_angle * (PI / 180.0f)); return _angleFactor; } -// interpolation tables uses more RAM (versus progmem) +// interpolation tables uses more RAM (versus PROGMEM) float BH1750FVI::setWaveLength(int waveLength) { _waveLength = constrain(waveLength, 400, 715); @@ -258,7 +258,7 @@ uint16_t BH1750FVI::readData() if (_wire->requestFrom(_address, (uint8_t) 2) != 2) { _error = BH1750FVI_ERROR_WIRE_REQUEST; - return _data; // last value + return _data; // last value } _data = _wire->read(); _data <<= 8; @@ -275,5 +275,5 @@ void BH1750FVI::command(uint8_t value) } -// --- END OF FILE --- +// --- END OF FILE --- diff --git a/libraries/BH1750FVI_RT/BH1750FVI.h b/libraries/BH1750FVI_RT/BH1750FVI.h index d0b8bf9d..1b22f3dc 100644 --- a/libraries/BH1750FVI_RT/BH1750FVI.h +++ b/libraries/BH1750FVI_RT/BH1750FVI.h @@ -2,10 +2,9 @@ // // FILE: BH1750FVI.h // AUTHOR: Rob Tillaart -// VERSION: 0.3.0 +// VERSION: 0.3.1 // PURPOSE: Arduino library for BH1750FVI (GY-30) lux sensor -// HISTORY: see changelog.md -// +// URL: https://github.com/RobTillaart/BH1750FVI_RT // breakout BH1750FVI / GY-30 @@ -28,7 +27,7 @@ #include "Arduino.h" -#define BH1750FVI_LIB_VERSION (F("0.3.0")) +#define BH1750FVI_LIB_VERSION (F("0.3.1")) #define BH1750FVI_DEFAULT_ADDRESS 0x23 @@ -52,11 +51,11 @@ public: BH1750FVI(const uint8_t address, TwoWire *wire = &Wire); // returns true if isConnected() - bool begin(); // resets to constructor defaults. (use with care) - bool isConnected(); // returns true if address is on I2C bus + bool begin(); // resets to constructor defaults. (use with care) + bool isConnected(); // returns true if address is on I2C bus - float getRaw(); // no HIGH2 mode + no sensitivity factor. + float getRaw(); // no HIGH2 mode + no sensitivity factor. float getLux(); int getError(); @@ -87,11 +86,11 @@ public: // read datasheet P11 about details of the correction or sensitivity factor // to be used for very high and very low brightness // or to correct for e.g. transparency - void changeTiming(uint8_t time = BH1750FVI_REFERENCE_TIME); // 69 is default + void changeTiming(uint8_t time = BH1750FVI_REFERENCE_TIME); // 69 is default // returns changeTiming() parameter - uint8_t setCorrectionFactor(float factor = 1); // 0.45 .. 3.68 + uint8_t setCorrectionFactor(float factor = 1); // 0.45 .. 3.68 // returns percentage set. float getCorrectionFactor(); @@ -130,13 +129,13 @@ private: uint8_t _sensitivityFactor; uint8_t _mode; - uint32_t _requestTime = 0; - float _angleFactor = 1; - int _angle = 0; - float _tempFactor = 1; - int _temp = 20; - float _waveLengthFactor = 1; - int _waveLength = 580; + uint32_t _requestTime = 0; + float _angleFactor = 1; + int _angle = 0; + float _tempFactor = 1; + int _temp = 20; + float _waveLengthFactor = 1; + int _waveLength = 580; TwoWire* _wire; }; diff --git a/libraries/BH1750FVI_RT/CHANGELOG.md b/libraries/BH1750FVI_RT/CHANGELOG.md index 67d87c3e..96deb5c8 100644 --- a/libraries/BH1750FVI_RT/CHANGELOG.md +++ b/libraries/BH1750FVI_RT/CHANGELOG.md @@ -1,4 +1,4 @@ -# Change Log AD520X +# Change Log BH1750FVI All notable changes to this project will be documented in this file. @@ -6,6 +6,14 @@ The format is based on [Keep a Changelog](http://keepachangelog.com/) and this project adheres to [Semantic Versioning](http://semver.org/). +##[0.3.1] - 2024-04-09 +- update GitHub actions +- update URL in examples +- update keywords.txt +- fix CHANGELOG.md +- minor edits + + ##[0.3.0] - 2023-10-18 - simplify constructor / begin() - update examples diff --git a/libraries/BH1750FVI_RT/LICENSE b/libraries/BH1750FVI_RT/LICENSE index 42604f34..18dfaafa 100644 --- a/libraries/BH1750FVI_RT/LICENSE +++ b/libraries/BH1750FVI_RT/LICENSE @@ -1,6 +1,6 @@ MIT License -Copyright (c) 2020-2023 Rob Tillaart +Copyright (c) 2020-2024 Rob Tillaart Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal diff --git a/libraries/BH1750FVI_RT/README.md b/libraries/BH1750FVI_RT/README.md index f59ab6db..a56f6154 100644 --- a/libraries/BH1750FVI_RT/README.md +++ b/libraries/BH1750FVI_RT/README.md @@ -37,6 +37,22 @@ Note that the typical integration time will differ if the correction factor is c The **isReady()** an **getLux()** functions keep track of the adjustment needed. +#### Related + +- https://github.com/RobTillaart/BH1750FVI_RT +- https://github.com/RobTillaart/Max44007 +- https://github.com/RobTillaart/Max44009 +- https://github.com/RobTillaart/TSL235R pulse based irradiance variant. + +UV sensors +- https://github.com/RobTillaart/AnalogUVSensor +- https://github.com/RobTillaart/ML8511 + +IR sensor +- https://github.com/RobTillaart/TSL260R analog IR irradiance variant. + + + ## Interface hardware Library was tested with a breakout board. @@ -67,7 +83,7 @@ Note: the breakout board was 5 volt tolerant. #include "BH1750FVI.h" ``` -### Constructor +#### Constructor - **BH1750FVI(uint8_t address, uint8_t dataPin, uint8_t clockPin)** ESP constructor with I2C parameters. - **BH1750FVI(uint8_t address, TwoWire \*wire = &Wire)** constructor for other platforms. @@ -75,13 +91,13 @@ Note: the breakout board was 5 volt tolerant. - **bool isConnected()** returns true if address is on I2C bus. -### Base +#### Base - **float getRaw()** reads the lux sensor. - **float getLux()** reads the lux sensor and corrects for correctionFactor, mode, temperature and angle. -### Management +#### Management - **int getError()** get the latest error code, mainly for debugging. - **void powerOn()** wakes up the sensor. @@ -89,7 +105,7 @@ Note: the breakout board was 5 volt tolerant. - **void reset()** resets the data register to 0, effectively removing last measurement. -### Mode operators +#### Mode operators - **uint8_t getMode()** gets the mode set by one of the set functions. See table above. @@ -101,7 +117,7 @@ See table above. - **void setOnceLowRes()** single shot mode in LOW resolution. -### CorrectionFactor +#### CorrectionFactor Please read datasheet P11 about details of the correction factor. @@ -116,7 +132,7 @@ Returns changeTiming() parameter. Note this can differ as it is stores as an integer internally. -### Angle sensitivity +#### Angle sensitivity Note: experimental - use carefully @@ -138,7 +154,7 @@ Returns the angle correction factor. - **int getAngle()** returns set angle in degrees, 0 by default is perpendicular. -### Temperature Compensation +#### Temperature Compensation The reference temperature of the sensor = 20°C. The effect of temperature is small, about 3% per 60°C ==> 1% per 20°C @@ -149,7 +165,7 @@ Returns the temperature correction factor. - **int getTemperature()** returns temperature set, default = 20°C. -### Spectral Compensation ! EXPERIMENTAL ! +#### Spectral Compensation ! EXPERIMENTAL ! Spectral compensation is experimental and not tested. It is a compensation based upon the graph figure 1, page 3 of the datasheet. If one has light of a known wavelength one can @@ -164,37 +180,36 @@ Returns the wavelength correction factor. As the graph (figure 1) is not linear it is approximated by linear interpolation with the following six points. -| WaveLength | Perc % | -|:-----------|:------:| -| 400 | 1 | -| 440 | 10 | -| 510 | 90 | -| 545 | 80 | -| 580 | 100 | -| 700 | 07 | -| 715 | 1 | +| WaveLength | Colour | Perc % | +|:-----------|:--------:|:--------:| +| 400 | violet | 1 | +| 440 | blue | 10 | +| 510 | green | 90 | +| 545 | green | 80 | +| 580 | yellow | 100 | +| 700 | red | 07 | +| 715 | red | 1 | + +Colour is indicative. Values outside the range will be mapped upon 400 or 715. Default wavelength will be 580 as that gives 100%. -## Operation - -See samples... - - ## Future #### Must + #### Should + #### Could - **Intelligent isReady()** After a **getLux()** call one can clean the data register explicitly with **reset()**. Then a call to **isReady()** fetches data and as long as -data equals zero the sensor is not ready. +data equals zero the sensor is not ready (or in pitch dark?) - **DVI interface** To investigate, sort of external reset? - move code to .cpp diff --git a/libraries/BH1750FVI_RT/examples/BH1750FVI_angle_measurement/BH1750FVI_angle_measurement.ino b/libraries/BH1750FVI_RT/examples/BH1750FVI_angle_measurement/BH1750FVI_angle_measurement.ino index c2f5146d..65e80d2a 100644 --- a/libraries/BH1750FVI_RT/examples/BH1750FVI_angle_measurement/BH1750FVI_angle_measurement.ino +++ b/libraries/BH1750FVI_RT/examples/BH1750FVI_angle_measurement/BH1750FVI_angle_measurement.ino @@ -1,9 +1,8 @@ // // FILE: BH1750FVI_angle_measurement.ino // AUTHOR: Rob Tillaart -// VERSION: 0.1.1 // PURPOSE: demo of BH1750FVI lux scanner library -// DATE: 2020-08-31 +// URL: https://github.com/RobTillaart/BH1750FVI_RT // /* @@ -77,12 +76,12 @@ void loop() { float val = measure(1, false); - val = map(val, ref2, ref1, 0, ref1); // does not constrain... + val = map(val, ref2, ref1, 0, ref1); // does not constrain... - // prevent NAN - float f = val / ref1; // map to 0..1 - if (f > 1) f = 1; // constrain upper - if (f < -1) f = -1; // constrain lower + // prevent NAN + float f = val / ref1; // map to 0..1 + if (f > 1) f = 1; // constrain upper + if (f < -1) f = -1; // constrain lower Serial.print(val, 1); Serial.print("\t"); diff --git a/libraries/BH1750FVI_RT/examples/BH1750FVI_async/BH1750FVI_async.ino b/libraries/BH1750FVI_RT/examples/BH1750FVI_async/BH1750FVI_async.ino index 58343cce..5c12eef9 100644 --- a/libraries/BH1750FVI_RT/examples/BH1750FVI_async/BH1750FVI_async.ino +++ b/libraries/BH1750FVI_RT/examples/BH1750FVI_async/BH1750FVI_async.ino @@ -2,7 +2,7 @@ // FILE: BH1750FVI_async.ino // AUTHOR: Rob Tillaart // PURPOSE: demo of BH1750FVI lux scanner library -// DATE: 2020-08-20 +// URL: https://github.com/RobTillaart/BH1750FVI_RT #include "BH1750FVI.h" @@ -50,12 +50,12 @@ void loop() // note correction factor are steps of 1/69 internally, see datasheet correctionFactor += 0.05; - if (correctionFactor > 3.68) // 0.45 - 3.68 = 45 steps of 0.05 + if (correctionFactor > 3.68) // 0.45 - 3.68 = 45 steps of 0.05 { correctionFactor = 0.45; Serial.println(); } - myLux.setCorrectionFactor(correctionFactor); // 0.45 .. 3.68 + myLux.setCorrectionFactor(correctionFactor); // 0.45 .. 3.68 count++; } diff --git a/libraries/BH1750FVI_RT/examples/BH1750FVI_cont_high_res/BH1750FVI_cont_high_res.ino b/libraries/BH1750FVI_RT/examples/BH1750FVI_cont_high_res/BH1750FVI_cont_high_res.ino index 4dafa779..a787a0c6 100644 --- a/libraries/BH1750FVI_RT/examples/BH1750FVI_cont_high_res/BH1750FVI_cont_high_res.ino +++ b/libraries/BH1750FVI_RT/examples/BH1750FVI_cont_high_res/BH1750FVI_cont_high_res.ino @@ -2,7 +2,7 @@ // FILE: BH1750FVI_cont_high_res.ino // AUTHOR: Rob Tillaart // PURPOSE: demo of BH1750FVI lux scanner library -// DATE: 2020-02-02 +// URL: https://github.com/RobTillaart/BH1750FVI_RT // // This is a minimal version, which can be optimized by // using mylux.getRaw() instead of myLux.getLux(); line 38 diff --git a/libraries/BH1750FVI_RT/examples/BH1750FVI_cont_high_res_Wire1/BH1750FVI_cont_high_res_Wire1.ino b/libraries/BH1750FVI_RT/examples/BH1750FVI_cont_high_res_Wire1/BH1750FVI_cont_high_res_Wire1.ino index 11a4bb91..59616500 100644 --- a/libraries/BH1750FVI_RT/examples/BH1750FVI_cont_high_res_Wire1/BH1750FVI_cont_high_res_Wire1.ino +++ b/libraries/BH1750FVI_RT/examples/BH1750FVI_cont_high_res_Wire1/BH1750FVI_cont_high_res_Wire1.ino @@ -2,7 +2,7 @@ // FILE: BH1750FVI_cont_high_res_Wire1.ino // AUTHOR: Rob Tillaart // PURPOSE: demo of BH1750FVI lux scanner library -// DATE: 2023-10-18 +// URL: https://github.com/RobTillaart/BH1750FVI_RT // // This sketch only works on platforms with a Wire1 // e.g. ESP32 and RPIpico diff --git a/libraries/BH1750FVI_RT/examples/BH1750FVI_cont_low_res/BH1750FVI_cont_low_res.ino b/libraries/BH1750FVI_RT/examples/BH1750FVI_cont_low_res/BH1750FVI_cont_low_res.ino index 95667c1c..37da016f 100644 --- a/libraries/BH1750FVI_RT/examples/BH1750FVI_cont_low_res/BH1750FVI_cont_low_res.ino +++ b/libraries/BH1750FVI_RT/examples/BH1750FVI_cont_low_res/BH1750FVI_cont_low_res.ino @@ -2,7 +2,7 @@ // FILE: BH1750FVI_cont_low_res.ino // AUTHOR: Rob Tillaart // PURPOSE: demo of BH1750FVI lux scanner library -// DATE: 2020-02-02 +// URL: https://github.com/RobTillaart/BH1750FVI_RT #include "BH1750FVI.h" diff --git a/libraries/BH1750FVI_RT/examples/BH1750FVI_setAngle/BH1750FVI_setAngle.ino b/libraries/BH1750FVI_RT/examples/BH1750FVI_setAngle/BH1750FVI_setAngle.ino index 8a3d145d..28b37583 100644 --- a/libraries/BH1750FVI_RT/examples/BH1750FVI_setAngle/BH1750FVI_setAngle.ino +++ b/libraries/BH1750FVI_RT/examples/BH1750FVI_setAngle/BH1750FVI_setAngle.ino @@ -2,7 +2,7 @@ // FILE: BH1750FVI_setAngle.ino // AUTHOR: Rob Tillaart // PURPOSE: demo of BH1750FVI lux scanner library -// DATE: 2020-08-31 +// URL: https://github.com/RobTillaart/BH1750FVI_RT #include "BH1750FVI.h" diff --git a/libraries/BH1750FVI_RT/examples/BH1750FVI_setCorrectionFactor/BH1750FVI_setCorrectionFactor.ino b/libraries/BH1750FVI_RT/examples/BH1750FVI_setCorrectionFactor/BH1750FVI_setCorrectionFactor.ino index add77b97..1492da52 100644 --- a/libraries/BH1750FVI_RT/examples/BH1750FVI_setCorrectionFactor/BH1750FVI_setCorrectionFactor.ino +++ b/libraries/BH1750FVI_RT/examples/BH1750FVI_setCorrectionFactor/BH1750FVI_setCorrectionFactor.ino @@ -2,7 +2,7 @@ // FILE: setCorrectionFactor.ino // AUTHOR: Rob Tillaart // PURPOSE: demo of BH1750FVI lux scanner library -// DATE: 2020-02-02 +// URL: https://github.com/RobTillaart/BH1750FVI_RT #include "BH1750FVI.h" diff --git a/libraries/BH1750FVI_RT/examples/BH1750FVI_setTemperature/BH1750FVI_setTemperature.ino b/libraries/BH1750FVI_RT/examples/BH1750FVI_setTemperature/BH1750FVI_setTemperature.ino index 7a8f153d..d7d17c1c 100644 --- a/libraries/BH1750FVI_RT/examples/BH1750FVI_setTemperature/BH1750FVI_setTemperature.ino +++ b/libraries/BH1750FVI_RT/examples/BH1750FVI_setTemperature/BH1750FVI_setTemperature.ino @@ -2,7 +2,7 @@ // FILE: BH1750FVI_setTemperature.ino // AUTHOR: Rob Tillaart // PURPOSE: demo of BH1750FVI lux scanner library -// DATE: 2020-09-04 +// URL: https://github.com/RobTillaart/BH1750FVI_RT #include "BH1750FVI.h" diff --git a/libraries/BH1750FVI_RT/examples/BH1750FVI_setWaveLength/BH1750FVI_setWaveLength.ino b/libraries/BH1750FVI_RT/examples/BH1750FVI_setWaveLength/BH1750FVI_setWaveLength.ino index 02d67f74..f8cb7fbc 100644 --- a/libraries/BH1750FVI_RT/examples/BH1750FVI_setWaveLength/BH1750FVI_setWaveLength.ino +++ b/libraries/BH1750FVI_RT/examples/BH1750FVI_setWaveLength/BH1750FVI_setWaveLength.ino @@ -2,7 +2,7 @@ // FILE: BH1750FVI_setWaveLength.ino // AUTHOR: Rob Tillaart // PURPOSE: demo of BH1750FVI lux scanner library -// DATE: 2020-09-04 +// URL: https://github.com/RobTillaart/BH1750FVI_RT #include "BH1750FVI.h" diff --git a/libraries/BH1750FVI_RT/examples/BH1750FVI_single_shot_3_res/BH1750FVI_single_shot_3_res.ino b/libraries/BH1750FVI_RT/examples/BH1750FVI_single_shot_3_res/BH1750FVI_single_shot_3_res.ino index b6c518b8..8da6a3ed 100644 --- a/libraries/BH1750FVI_RT/examples/BH1750FVI_single_shot_3_res/BH1750FVI_single_shot_3_res.ino +++ b/libraries/BH1750FVI_RT/examples/BH1750FVI_single_shot_3_res/BH1750FVI_single_shot_3_res.ino @@ -2,7 +2,7 @@ // FILE: BH1750FVI_single_shot_3_res.ino // AUTHOR: Rob Tillaart // PURPOSE: demo of BH1750FVI lux scanner library -// DATE: 2020-08-20 +// URL: https://github.com/RobTillaart/BH1750FVI_RT #include "BH1750FVI.h" diff --git a/libraries/BH1750FVI_RT/keywords.txt b/libraries/BH1750FVI_RT/keywords.txt index 1a73cf06..bcb02fe8 100644 --- a/libraries/BH1750FVI_RT/keywords.txt +++ b/libraries/BH1750FVI_RT/keywords.txt @@ -6,19 +6,23 @@ BH1750FVI KEYWORD1 # Methods and Functions (KEYWORD2) +begin KEYWORD2 +isConnected KEYWORD2 + getRaw KEYWORD2 getLux KEYWORD2 getError KEYWORD2 -reset KEYWORD2 -isConnected KEYWORD2 powerOn KEYWORD2 powerOff KEYWORD2 reset KEYWORD2 +getMode KEYWORD2 + setContHighRes KEYWORD2 setContHigh2Res KEYWORD2 setContLowRes KEYWORD2 + setOnceHighRes KEYWORD2 setOnceHigh2Res KEYWORD2 setOnceLowRes KEYWORD2 @@ -30,6 +34,7 @@ getCorrectionFactor KEYWORD2 setAngle KEYWORD2 getAngle KEYWORD2 + setTemperature KEYWORD2 getTemperature KEYWORD2 setWaveLength KEYWORD2 diff --git a/libraries/BH1750FVI_RT/library.json b/libraries/BH1750FVI_RT/library.json index 98029577..47f41110 100644 --- a/libraries/BH1750FVI_RT/library.json +++ b/libraries/BH1750FVI_RT/library.json @@ -15,7 +15,7 @@ "type": "git", "url": "https://github.com/RobTillaart/BH1750FVI_RT.git" }, - "version": "0.3.0", + "version": "0.3.1", "license": "MIT", "frameworks": "*", "platforms": "*", diff --git a/libraries/BH1750FVI_RT/library.properties b/libraries/BH1750FVI_RT/library.properties index 557c296c..af3779e6 100644 --- a/libraries/BH1750FVI_RT/library.properties +++ b/libraries/BH1750FVI_RT/library.properties @@ -1,5 +1,5 @@ name=BH1750FVI_RT -version=0.3.0 +version=0.3.1 author=Rob Tillaart maintainer=Rob Tillaart sentence=Arduino library for BH1750FVI (GY-30) lux sensor