diff --git a/libraries/MultMap/MultiMap.h b/libraries/MultMap/MultiMap.h
new file mode 100644
index 00000000..08d9290c
--- /dev/null
+++ b/libraries/MultMap/MultiMap.h
@@ -0,0 +1,77 @@
+//
+//    FILE: multiMap.h
+//  AUTHOR: Rob Tillaart
+// VERSION: 0.1.00
+// PURPOSE: MultiMap library for Arduino
+//     URL: http://playground.arduino.cc/Main/MultiMap
+//
+// HISTORY: see playground article
+//
+
+#ifndef multimap_h
+#define multimap_h
+
+#define MULTIMAP_LIB_VERSION "0.1.00"
+
+#if ARDUINO < 100
+#include <WProgram.h>
+#else
+#include <Arduino.h>
+#endif
+
+// note: the in array should have increasing values
+template<typename T>
+T multiMap(T val, T* _in, T* _out, uint8_t size)
+{
+    // take care the value is within range
+    // val = constrain(val, _in[0], _in[size-1]);
+    if (val <= _in[0]) return _out[0];
+    if (val >= _in[size-1]) return _out[size-1];
+
+    // search right interval
+    uint8_t pos = 1;  // _in[0] allready tested
+    while(val > _in[pos]) pos++;
+
+    // this will handle all exact "points" in the _in array
+    if (val == _in[pos]) return _out[pos];
+
+    // interpolate in the right segment for the rest
+    return (val - _in[pos-1]) * (_out[pos] - _out[pos-1]) / (_in[pos] - _in[pos-1]) + _out[pos-1];
+}
+
+/*
+#include "multiMap.h"
+
+int in[] = {11,22,33};
+int out[] = {111,222,555};
+
+float fin[] = {11,22,33};
+float fout[] = {111,222,555};
+
+uint32_t start;
+uint32_t stop;
+
+void setup() 
+{
+  Serial.begin(115200);
+  Serial.println("Start ");
+
+  start = micros();
+  float  x = multiMap<int>(12, in, out, 3);  
+  stop = micros();
+  Serial.println(stop-start);  
+  Serial.println(x);
+
+  start = micros();
+  float  y = multiMap<float>(12, fin, fout, 3);
+  stop = micros();
+  Serial.println(stop-start);
+  Serial.println(y);
+}
+
+void loop() {}
+*/
+#endif
+//
+// END OF FILE
+//
\ No newline at end of file