0.5.0 GY521

libraries/GY521/CHANGELOG.md

@@ -6,11 +6,16 @@ The format is based on [Keep a Changelog](http://keepachangelog.com/)
 and this project adheres to [Semantic Versioning](http://semver.org/).
 
 
+## [0.5.0] - 2023-12-05
+- refactor API, begin()
+- update readme.md
+
+----
+
 ## [0.4.1] - 2023-11-02
 - update readme.md
 - minor edits
 
-
 ## [0.4.0] - 2023-06-11
 - fix #42 roll + pitch "jumps" after full rotation.
 - fixed normalization code.

libraries/GY521/GY521.cpp

@@ -1,7 +1,7 @@
 //
 //    FILE: GY521.cpp
 //  AUTHOR: Rob Tillaart
-// VERSION: 0.4.1
+// VERSION: 0.5.0
 // PURPOSE: Arduino library for I2C GY521 accelerometer-gyroscope sensor
 //     URL: https://github.com/RobTillaart/GY521
 
@@ -29,22 +29,8 @@ GY521::GY521(uint8_t address, TwoWire *wire)
 }
 
 
-#if defined (ESP8266) || defined(ESP32)
-bool GY521::begin(uint8_t sda, uint8_t scl)
-{
-  _wire->begin(sda, scl);
-  if (isConnected())
-  {
-    return wakeup();
-  }
-  return false;
-}
-#endif
-
-
 bool GY521::begin()
 {
-  _wire->begin();
   if (isConnected())
   {
     return wakeup();

libraries/GY521/GY521.h

@@ -2,7 +2,7 @@
 //
 //    FILE: GY521.h
 //  AUTHOR: Rob Tillaart
-// VERSION: 0.4.1
+// VERSION: 0.5.0
 // PURPOSE: Arduino library for I2C GY521 accelerometer-gyroscope sensor
 //     URL: https://github.com/RobTillaart/GY521
 
@@ -11,7 +11,7 @@
 #include "Wire.h"
 
 
-#define GY521_LIB_VERSION           (F("0.4.1"))
+#define GY521_LIB_VERSION           (F("0.5.0"))
 
 
 //  THROTTLE TIMING

libraries/GY521/README.md

@@ -23,6 +23,14 @@ It needs to be tested a lot more.
 
 See changelog.md for latest updates.
 
+#### 0.5.0 Breaking change
+
+Version 0.5.0 introduced a breaking change.
+You cannot set the pins in **begin()** any more.
+This reduces the dependency of processor dependent Wire implementations.
+The user has to call **Wire.begin()** and can optionally set the Wire pins 
+before calling **begin()**.
+
 
 #### Examples
 
@@ -75,8 +83,8 @@ AD0 connected to VCC => 0x69
 
 - **GY521(uint8_t address = 0x69, , TwoWire \*wire = &Wire)** Constructor with default address. 
 0x68 is also a valid address. The wire argument is optional to select Wire1 Wire2 etc. on some boards.
-- **bool begin(uint8_t sda, uint8_t scl)** begin for ESP32 et al. Returns true if address can be found on I2C bus.
 - **bool begin()** Returns true if address can be found on I2C bus.
+Note call **Wire.begin()** before **begin()**.
 - **bool isConnected()** returns true if device can be found on I2C bus.
 - **void reset()** set all internal values to 0 and throttle time to 10 ms.
 - **bool wakeUp()** idem.

libraries/GY521/examples/GY521_angle/GY521_angle.ino

@@ -2,7 +2,6 @@
 //    FILE: GY521_angle.ino
 //  AUTHOR: Rob Tillaart
 // PURPOSE: read angleX, angleY, angleZ
-//    DATE: 2022-06-06
 
 
 #include "GY521.h"

libraries/GY521/examples/GY521_performance/GY521_performance.ino

@@ -2,7 +2,6 @@
 //    FILE: GY521_performance.ino
 //  AUTHOR: Rob Tillaart
 // PURPOSE: minimal demo
-//    DATE: 2021-06-13
 
 
 #include "GY521.h"
@@ -47,5 +46,5 @@ void loop()
 }
 
 
-// -- END OF FILE --
+//  -- END OF FILE --
 

libraries/GY521/examples/GY521_pitch_roll_yaw/GY521_pitch_roll_yaw.ino

@@ -2,7 +2,6 @@
 //    FILE: GY521_pitch_roll_yaw.ino
 //  AUTHOR: Rob Tillaart
 // PURPOSE: demo pitch roll yaw
-//    DATE: 2020-08-06
 
 
 #include "GY521.h"
@@ -29,13 +28,13 @@ void setup()
     Serial.println("\tCould not connect to GY521");
     delay(1000);
   }
-  sensor.setAccelSensitivity(2);  // 8g
-  sensor.setGyroSensitivity(1);   // 500 degrees/s
+  sensor.setAccelSensitivity(2);  //  8g
+  sensor.setGyroSensitivity(1);   //  500 degrees/s
 
   sensor.setThrottle();
   Serial.println("start...");
 
-  // set calibration values from calibration sketch.
+  //  set calibration values from calibration sketch.
   sensor.axe = 0.574;
   sensor.aye = -0.002;
   sensor.aze = -1.043;
@@ -70,5 +69,5 @@ void loop()
 }
 
 
-// -- END OF FILE --
+//  -- END OF FILE --
 

libraries/GY521/examples/GY521_readCalibration_1/GY521_readCalibration_1.ino

@@ -2,7 +2,6 @@
 //    FILE: GY521_readCalibration_1.ino
 //  AUTHOR: Rob Tillaart
 // PURPOSE: read the calibration values / errors for a flat sensor.
-//    DATE: 2020-07-14
 
 
 #include "GY521.h"
@@ -31,11 +30,11 @@ void setup()
     Serial.println("Could not connect to GY521");
   }
   // adjust when needed.
-  sensor.setAccelSensitivity(0);  // 2g
-  sensor.setGyroSensitivity(0);   // 250 degrees/s
+  sensor.setAccelSensitivity(0);  //  2g
+  sensor.setGyroSensitivity(0);   //  250 degrees/s
   sensor.setThrottle(false);
 
-  // set all calibration errors to zero
+  //  set all calibration errors to zero
   sensor.axe = 0;
   sensor.aye = 0;
   sensor.aze = 0;
@@ -100,7 +99,7 @@ void loop()
   Serial.print(t * 0.05, 2);
   Serial.println();
 
-  // adjust calibration errors so table should get all zero's.
+  //  adjust calibration errors so table should get all zero's.
   sensor.axe += ax * 0.05;
   sensor.aye += ay * 0.05;
   sensor.aze += az * 0.05;
@@ -113,5 +112,5 @@ void loop()
 }
 
 
-// -- END OF FILE --
+//  -- END OF FILE --
 

libraries/GY521/examples/GY521_readCalibration_2/GY521_readCalibration_2.ino

@@ -2,7 +2,6 @@
 //    FILE: readCalibration_2.ino
 //  AUTHOR: Rob Tillaart
 // PURPOSE: read the calibration values / errors for a flat sensor.
-//    DATE: 2022-06-07
 
 
 #include "GY521.h"

libraries/GY521/examples/GY521_test_1/GY521_test_1.ino

@@ -2,7 +2,6 @@
 //    FILE: GY521_test_1.ino
 //  AUTHOR: Rob Tillaart
 // PURPOSE: minimal demo to test working of the sensor.
-//    DATE: 2020-07-01
 
 
 #include "GY521.h"

libraries/GY521/examples/GY521_test_2/GY521_test_2.ino

@@ -2,7 +2,6 @@
 //    FILE: GY521_test_2.ino
 //  AUTHOR: Rob Tillaart
 // PURPOSE: test set/get functions
-//    DATE: 2020-08-06
 
 
 #include "GY521.h"

libraries/GY521/library.json

@@ -15,7 +15,7 @@
     "type": "git",
     "url": "https://github.com/RobTillaart/GY521.git"
   },
-  "version": "0.4.1",
+  "version": "0.5.0",
   "license": "MIT",
   "frameworks": "*",
   "platforms": "*",

libraries/GY521/library.properties

@@ -1,5 +1,5 @@
 name=GY521
-version=0.4.1
+version=0.5.0
 author=Rob Tillaart <rob.tillaart@gmail.com>
 maintainer=Rob Tillaart <rob.tillaart@gmail.com>
 sentence=Arduino library for GY521 angle measurement

libraries/GY521/test/unit_test_001.cpp

@@ -44,6 +44,7 @@ unittest(test_constructor)
 {
   GY521 sensor(0x69);
 
+  Wire.begin();
   sensor.begin();
   assertEqual(GY521_OK, sensor.getError());
 
@@ -54,6 +55,8 @@ unittest(test_constructor)
 unittest(test_get_set_throttle)
 {
   GY521 sensor(0x69);
+
+  Wire.begin();
   sensor.begin();
   assertEqual(GY521_OK, sensor.getError());
 
@@ -76,6 +79,8 @@ unittest(test_get_set_throttle)
 unittest(test_get_set_sensitivity)
 {
   GY521 sensor(0x69);
+
+  Wire.begin();
   sensor.begin();
 
   fprintf(stderr, "setAccelSensitivity() - fails \n");
@@ -116,6 +121,8 @@ unittest(test_initial_values)
 {
   GY521 sensor(0x69);
 
+  Wire.begin();
+
   assertEqualFloat(0, sensor.getAccelX(), 0.0001);
   assertEqualFloat(0, sensor.getAccelY(), 0.0001);
   assertEqualFloat(0, sensor.getAccelZ(), 0.0001);
@@ -143,6 +150,8 @@ unittest(test_initial_calibration_errors)
 {
   GY521 sensor(0x69);
 
+  Wire.begin();
+
   assertEqualFloat(0, sensor.axe, 0.0001);
   assertEqualFloat(0, sensor.aye, 0.0001);
   assertEqualFloat(0, sensor.aze, 0.0001);
@@ -155,5 +164,6 @@ unittest(test_initial_calibration_errors)
 
 unittest_main()
 
+
 //  -- END OF FILE --