update build-CI, readme

libraries/DHT_Simulator/.arduino-ci.yml

@@ -2,6 +2,10 @@ compile:
   # Choosing to run compilation tests on 2 different Arduino platforms
   platforms:
     - uno
-    - leonardo
-    - due
-    - zero
+    # - due
+    # - zero
+    # - leonardo
+    - m4
+    - esp32
+    # - esp8266
+    # - mega2560

libraries/DHT_Simulator/.github/workflows/arduino_test_runner.yml

@@ -4,10 +4,14 @@ name: Arduino CI
 on: [push, pull_request]
 
 jobs:
-  arduino_ci:
+  runTest:
     runs-on: ubuntu-latest
 
     steps:
       - uses: actions/checkout@v2
-      - uses: Arduino-CI/action@master
-          #   Arduino-CI/action@v0.1.1
+      - uses: ruby/setup-ruby@v1
+        with:
+          ruby-version: 2.6
+      - run: |
+          gem install arduino_ci
+          arduino_ci.rb

libraries/DHT_Simulator/README.md

@@ -1,12 +1,16 @@
 
 [![Arduino CI](https://github.com/RobTillaart/DHT_Simulator/workflows/Arduino%20CI/badge.svg)](https://github.com/marketplace/actions/arduino_ci)
+[![Arduino-lint](https://github.com/RobTillaart/DHT_Simulator/actions/workflows/arduino-lint.yml/badge.svg)](https://github.com/RobTillaart/DHT_Simulator/actions/workflows/arduino-lint.yml)
+[![JSON check](https://github.com/RobTillaart/DHT_Simulator/actions/workflows/jsoncheck.yml/badge.svg)](https://github.com/RobTillaart/DHT_Simulator/actions/workflows/jsoncheck.yml)
 [![License: MIT](https://img.shields.io/badge/license-MIT-green.svg)](https://github.com/RobTillaart/DHT_Simulator/blob/master/LICENSE)
 [![GitHub release](https://img.shields.io/github/release/RobTillaart/DHT_Simulator.svg?maxAge=3600)](https://github.com/RobTillaart/DHT_Simulator/releases)
 
+
 # DHT_Simulator
 
 Arduino sketch to simulate a DHT22 temperature and humidity sensor.
 
+
 ## Description
 
 The DHT22 is an often used sensor and many libraries are written for it
@@ -17,10 +21,11 @@ I wrote a simulator for the DHT sensors in 2014.
 The simulator can be used to test applications to that use a DHT sensor,
 e.g. to get high alarm temp or whatever.
 
-Currently the code uses two analog ports to get a value for temperature 
-and humidity. Just connect two potmeters to play and simulate increase and 
+Currently the code uses two analogue ports to get a value for temperature 
+and humidity. Just connect two potentiometers to play and simulate increase and 
 decrease of the temperature and humidity.
 
+
 ## 0.2.1
 
 - added pin to trigger CRC errors
@@ -39,17 +44,19 @@ decrease of the temperature and humidity.
 
 The simulator is not tested extensively so please report bugs.
 
+
 ## Future
 
 1) use the simulator-core as a bridge to other sensors.
 Idea is to use the code of the simulator in combination with a 
-Senserion or two separate sensors (DS18B20 + ? ) to provide an 
+Sensirion or two separate sensors (DS18B20 + ? ) to provide an 
 accurate temperature and humidity. These could then be readable 
 with any DHT library with the performance of a DHT (~ 5ms).
 (when time permits)
 
 2) implement a recorder mode, to be able to replay a certain
-behavior time after time. 
+behaviour time after time. 
+
 
 ## Operation