0.4.2 SHT85

libraries/SHT85/CHANGELOG.md

@@ -6,12 +6,21 @@ The format is based on [Keep a Changelog](http://keepachangelog.com/)
 and this project adheres to [Semantic Versioning](http://semver.org/).
 
 
+## [0.4.2] - 2023-09-05
+- fix #19 SHT85 cannot be address 0x45
+- rewrote begin()
+- removed example SHT85_duo
+- add example SHT85_multiplex
+- add section about multiple SHT85 to readme.md
+- redo badges in readme.md
+- minor edits
+
+
 ## [0.4.1] - 2022-05-09
 - add **uint32_t getSerialNumber()** for SHT85 (no CRC check).
 - improve error handling.
 - update readme.md
 
-
 ## [0.4.0] - 2022-12-14
 - redo asynchronous interface
 - add **uint32_t getLastRequest()** timestamp.

libraries/SHT85/README.md

@@ -1,9 +1,12 @@
 
-[![Arduino CI](https://github.com/robtillaart/SHT85/workflows/Arduino%20CI/badge.svg)](https://github.com/marketplace/actions/arduino_ci)
+[![Arduino CI](https://github.com/RobTillaart/SHT85/workflows/Arduino%20CI/badge.svg)](https://github.com/marketplace/actions/arduino_ci)
 [![Arduino-lint](https://github.com/RobTillaart/SHT85/actions/workflows/arduino-lint.yml/badge.svg)](https://github.com/RobTillaart/SHT85/actions/workflows/arduino-lint.yml)
 [![JSON check](https://github.com/RobTillaart/SHT85/actions/workflows/jsoncheck.yml/badge.svg)](https://github.com/RobTillaart/SHT85/actions/workflows/jsoncheck.yml)
+[![GitHub issues](https://img.shields.io/github/issues/RobTillaart/SHT85.svg)](https://github.com/RobTillaart/SHT85/issues)
+
 [![License: MIT](https://img.shields.io/badge/license-MIT-green.svg)](https://github.com/RobTillaart/SHT85/blob/master/LICENSE)
 [![GitHub release](https://img.shields.io/github/release/RobTillaart/SHT85.svg?maxAge=3600)](https://github.com/RobTillaart/SHT85/releases)
+[![PlatformIO Registry](https://badges.registry.platformio.org/packages/robtillaart/library/SHT85.svg)](https://registry.platformio.org/libraries/robtillaart/SHT85)
 
 
 # SHT85
@@ -34,7 +37,7 @@ Always check datasheet before connecting!
 ```
 
 
-The SHT85 sensors should work up to 1000 KHz. 
+The SHT85 sensors should work (I2C) up to 1000 KHz. 
 During tests with an Arduino UNO it stopped between 500 - 550 KHz.
 So to be safe I recommend not to use the sensor above 400 KHz.
 Also the differences in read time becomes quite small. (max 15% gain).
@@ -58,13 +61,13 @@ SPS (= samples per second) are added later.
 |  550 KHz  |  ----   |       |  fail 
 
 
-At 10% load the SHT85 can be used to make about 10-15 SPS.
+At 10% load the SHT85 can be used to make about 10 - 15 SPS.
 
 
 #### Compatibility
 
 The SHT85 is protocol compatible with the SHT3x series.
-Main difference is the accuracy. 
+Main difference is the accuracy and the SHT85 only has address 0x44.
 Compare the data sheets to see all differences.
 
 Accuracy table:
@@ -81,6 +84,16 @@ Note: The SHT40, SHT41 and SHT45 are not protocol compatible with SHT3x and SHT8
 The SHT4x series is slightly faster than the SHT3x series.
 
 
+#### Multiple SHT85
+
+The SHT3x comes with two I2C address options, 0x44 and 0x45.
+The SHT85 only has 0x44 as I2C address, so it is not possible to have more than
+one on a single I2C bus. 
+This means you need to use multiple I2C buses (if your board support this), 
+a software I2C (below) or an I2C multiplexer e.g. https://github.com/RobTillaart/TCA9548
+
+
+
 #### Related libraries
 
 - https://github.com/RobTillaart/SHT2x
@@ -94,6 +107,9 @@ An elaborated library for the SHT31 sensor can be found here
 Dewpoint, heatindex, related functions and conversions.
 - https://github.com/RobTillaart/Temperature
 
+I2C multiplexer
+- https://github.com/RobTillaart/TCA9548
+
 
 ## Interface
 
@@ -313,3 +329,12 @@ Will switch the heater off if maximum heating time has passed.
 - **getKelvin()** wrapper? (no => check temperature class)
   ==> set Offset to 273.15 !
 
+
+## Support
+
+If you appreciate my libraries, you can support the development and maintenance.
+Improve the quality of the libraries by providing issues and Pull Requests, or
+donate through PayPal or GitHub sponsors.
+
+Thank you,
+

libraries/SHT85/SHT85.cpp

@@ -1,7 +1,7 @@
 //
 //    FILE: SHT85.cpp
 //  AUTHOR: Rob Tillaart
-// VERSION: 0.4.1
+// VERSION: 0.4.2
 //    DATE: 2021-02-10
 // PURPOSE: Arduino library for the SHT85 temperature and humidity sensor
 //          https://nl.rs-online.com/web/p/temperature-humidity-sensor-ics/1826530
@@ -484,6 +484,21 @@ SHT85::SHT85()
   _type = 85;
 }
 
+#if defined(ESP8266) || defined(ESP32)
+bool SHT85::begin(const uint8_t address, uint8_t dataPin, uint8_t clockPin)
+{
+  if (address != 0x44) return false;
+  return SHT::begin(SHT_DEFAULT_ADDRESS, dataPin, clockPin);
+}
+#endif
+
+
+bool SHT85::begin(const uint8_t address,  TwoWire *wire)
+{
+  if (address != 0x44) return false;
+  return SHT::begin(address, wire);
+}
+
 
 uint32_t SHT85::GetSerialNumber()
 {

libraries/SHT85/SHT85.h

@@ -2,7 +2,7 @@
 //
 //    FILE: SHT85.h
 //  AUTHOR: Rob Tillaart
-// VERSION: 0.4.1
+// VERSION: 0.4.2
 //    DATE: 2021-02-10
 // PURPOSE: Arduino library for the SHT85 temperature and humidity sensor
 //          https://nl.rs-online.com/web/p/temperature-humidity-sensor-ics/1826530
@@ -25,7 +25,7 @@
 #include "Wire.h"
 
 
-#define SHT_LIB_VERSION                 (F("0.4.1"))
+#define SHT_LIB_VERSION                 (F("0.4.2"))
 #define SHT85_LIB_VERSION               SHT_LIB_VERSION
 
 #ifndef SHT_DEFAULT_ADDRESS
@@ -184,6 +184,13 @@ class SHT85 : public SHT
 {
 public:
   SHT85();
+
+//  catch incorrect calls with an address, only 0x44 allowed, see #19
+#if defined(ESP8266) || defined(ESP32)
+  bool     begin(const uint8_t address, uint8_t dataPin, uint8_t clockPin);
+#endif
+  bool     begin(const uint8_t address,  TwoWire *wire = &Wire);
+
     //  EXPERIMENTAL for 0.4.1
   uint32_t GetSerialNumber();
 };

libraries/SHT85/examples/SHT85_duo/SHT85_duo.ino

@@ -1,68 +0,0 @@
-//
-//    FILE: SHT85_duo.ino
-//  AUTHOR: Rob Tillaart
-// PURPOSE: demo
-//     URL: https://github.com/RobTillaart/SHT85
-//
-// TOPVIEW SHT85  (check datasheet)
-//            +-------+
-// +-----\    | SDA 4 -----
-// | +-+  ----+ GND 3 -----
-// | +-+  ----+ +5V 2 -----
-// +-----/    | SCL 1 -----
-//            +-------+
-
-
-#include "SHT85.h"
-
-#define SHT85_ADDRESS   0x44
-
-uint32_t start;
-uint32_t stop;
-
-SHT85 sht1;
-SHT85 sht2;
-
-
-void setup()
-{
-  Serial.begin(115200);
-  Serial.println(__FILE__);
-  Serial.print("SHT_LIB_VERSION: \t");
-  Serial.println(SHT_LIB_VERSION);
-
-  Wire.begin();
-  sht1.begin(0x44);
-  sht2.begin(0x45);
-  Wire.setClock(100000);
-
-  uint16_t stat = sht1.readStatus();
-  Serial.print(stat, HEX);
-  Serial.println();
-  stat = sht2.readStatus();
-  Serial.print(stat, HEX);
-  Serial.println();
-  Serial.println();
-}
-
-
-void loop()
-{
-  Serial.print(millis());
-  sht1.read();         // default = true/fast       slow = false
-  Serial.print("\t0x44\t");
-  Serial.print(sht1.getTemperature(), 1);
-  Serial.print("\t");
-  Serial.print(sht1.getHumidity(), 1);
-
-  sht2.read();
-  Serial.print("\t0x45\t");
-  Serial.print(sht2.getTemperature(), 1);
-  Serial.print("\t");
-  Serial.println(sht2.getHumidity(), 1);
-  delay(100);
-}
-
-
-// -- END OF FILE --
-

libraries/SHT85/examples/SHT85_multiplex/.arduino-ci.yml

@@ -0,0 +1,29 @@
+platforms:
+  rpipico:
+    board: rp2040:rp2040:rpipico
+    package: rp2040:rp2040
+    gcc:
+      features:
+      defines:
+        - ARDUINO_ARCH_RP2040
+      warnings:
+      flags:
+
+packages:
+  rp2040:rp2040:
+    url: https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json
+
+compile:
+  # Choosing to run compilation tests on 2 different Arduino platforms
+  platforms:
+    - uno
+    # - due
+    # - zero
+    # - leonardo
+    - m4
+    - esp32
+    - esp8266
+    # - mega2560
+    - rpipico
+  libraries:
+    - TCA9548

libraries/SHT85/examples/SHT85_multiplex/SHT85_multiplex.ino

@@ -0,0 +1,78 @@
+//
+//    FILE: SHT85_multiplex.ino
+//  AUTHOR: Rob Tillaart
+// PURPOSE: demo
+//     URL: https://github.com/RobTillaart/SHT85
+//
+// TOPVIEW SHT85  (check datasheet)
+//            +-------+
+// +-----\    | SDA 4 -----
+// | +-+  ----+ GND 3 -----
+// | +-+  ----+ +5V 2 -----
+// +-----/    | SCL 1 -----
+//            +-------+
+
+//  TODO: test with hardware
+
+#include "SHT85.h"
+#include "TCA9548.h"
+
+TCA9548 MP(0x70);
+#define SHT85_ADDRESS   0x44
+
+SHT85 sht;  //  the object is reused in the multiplexing.
+
+void setup()
+{
+  Serial.begin(115200);
+  Serial.println(__FILE__);
+  Serial.print("TCA9548_LIB_VERSION: \t");
+  Serial.println(TCA9548_LIB_VERSION);
+  Serial.print("SHT_LIB_VERSION: \t");
+  Serial.println(SHT_LIB_VERSION);
+
+  Wire.begin();
+  Wire.setClock(100000);
+
+  if (MP.begin() == false)
+  {
+    Serial.println("Error: Could not connect to the multiplexer.");
+    while (1);
+  }
+
+  //  initialize 4 SHT85's
+  for (int channel = 0; channel < 4; channel++)
+  {
+    Serial.print(channel);
+    MP.selectChannel(channel);  //  rotate over all SHT85's
+    if (sht.begin(0x44) == false)
+    {
+      Serial.println("\tconnect error.");;
+    }
+    else 
+    {
+      Serial.println("\tOK!.");;
+    }
+    delay(10);
+  }
+
+  Serial.println();
+}
+
+
+void loop()
+{
+  Serial.print(millis());
+  Serial.print("\t");
+  for (int channel = 0; channel < 4; channel++)
+  {
+    sht.read();         // default = true/fast       slow = false
+    Serial.print(sht.getTemperature(), 1);
+    Serial.print("\t");
+    Serial.print(sht.getHumidity(), 1);
+    delay(100);
+  }
+}
+
+
+//  -- END OF FILE --

libraries/SHT85/library.json

@@ -15,7 +15,7 @@
     "type": "git",
     "url": "https://github.com/RobTillaart/SHT85"
   },
-  "version": "0.4.1",
+  "version": "0.4.2",
   "license": "MIT",
   "frameworks": "arduino",
   "platforms": "*",

libraries/SHT85/library.properties

@@ -1,5 +1,5 @@
 name=SHT85
-version=0.4.1
+version=0.4.2
 author=Rob Tillaart <rob.tillaart@gmail.com>
 maintainer=Rob Tillaart <rob.tillaart@gmail.com>
 sentence=Arduino library for the SHT85, SHT30, SHT31, SHT35 Senserion temperature and humidity sensors and compatibles.