alex/GY-63_MS5611
1
0
Fork 0
mirror of https://github.com/RobTillaart/Arduino.git synced 2024-10-03 18:09:02 -04:00
Code Issues Actions Packages Projects Releases Wiki Activity

0.1.1 INA228

Browse Source
This commit is contained in:
Rob Tillaart 2024-05-17 15:28:15 +02:00
parent d56bded24c
commit 01eae48e9d
7 changed files with 317 additions and 116 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
libraries/INA228/CHANGELOG.md
View File

@ -6,6 +6,17 @@ The format is based on [Keep a Changelog](http://keepachangelog.com/)
and this project adheres to [Semantic Versioning](http://semver.org/). and this project adheres to [Semantic Versioning](http://semver.org/).
## [0.1.1] - 2024-05-15
- add limit functions
- add threshold functions
- add constants for DiagnoseAlert register
- check them in unit test
- move register constants to .cpp
- make readRegister() and writeRegister() private
- update readme.md, keywords.txt
- minor edits
## [0.1.0] - 2024-05-10 ## [0.1.0] - 2024-05-10
- initial version - initial version

125
libraries/INA228/INA228.cpp
View File

@ -1,8 +1,8 @@
// FILE: INA228.cpp // FILE: INA228.cpp
// AUTHOR: Rob Tillaart // AUTHOR: Rob Tillaart
// VERSION: 0.1.0 // VERSION: 0.1.1
// DATE: 2024-05-09 // DATE: 2024-05-09
// PURPOSE: Arduino library for INA228 power sensor // PURPOSE: Arduino library for INA228 voltage, current and power sensor.
// URL: https://github.com/RobTillaart/INA228 // URL: https://github.com/RobTillaart/INA228
// //
// Read the datasheet for the details // Read the datasheet for the details
@ -10,6 +10,27 @@
#include "INA228.h" #include "INA228.h"
// REGISTERS ADDRESS BITS RW
#define INA228_CONFIG 0x00 // 16 RW
#define INA228_ADC_CONFIG 0x01 // 16 RW
#define INA228_SHUNT_CAL 0x02 // 16 RW
#define INA228_SHUNT_TEMP_CO 0x03 // 16 RW
#define INA228_SHUNT_VOLTAGE 0x04 // 24 R-
#define INA228_BUS_VOLTAGE 0x05 // 24 R-
#define INA228_TEMPERATURE 0x06 // 16 R-
#define INA228_CURRENT 0x07 // 24 R-
#define INA228_POWER 0x08 // 24 R-
#define INA228_ENERGY 0x09 // 40 R-
#define INA228_CHARGE 0x0A // 40 R-
#define INA228_DIAG_ALERT 0x0B // 16 RW
#define INA228_SOVL 0x0C // 16 RW
#define INA228_SUVL 0x0D // 16 RW
#define INA228_BOVL 0x0E // 16 RW
#define INA228_BUVL 0x0F // 16 RW
#define INA228_TEMP_LIMIT 0x10 // 16 RW
#define INA228_POWER_LIMIT 0x11 // 16 RW
#define INA228_MANUFACTURER 0x3E // 16 R-
#define INA228_DEVICE_ID 0x3F // 16 R-
//////////////////////////////////////////////////////// ////////////////////////////////////////////////////////
@ -125,13 +146,13 @@ void INA228::reset()
_writeRegister(INA228_CONFIG, value); _writeRegister(INA228_CONFIG, value);
} }
bool INA228::setAccumulation(uint8_t val) bool INA228::setAccumulation(uint8_t value)
{ {
if (val > 1) return false; if (value > 1) return false;
uint16_t value = _readRegister(INA228_CONFIG, 2); uint16_t reg = _readRegister(INA228_CONFIG, 2);
value &= ~0x4000; reg &= ~0x4000;
if (val == 1) value |= 0x4000; if (value == 1) reg |= 0x4000;
_writeRegister(INA228_CONFIG, value); _writeRegister(INA228_CONFIG, reg);
return true; return true;
} }
@ -317,7 +338,36 @@ uint16_t INA228::getShuntTemperatureCoefficent()
// //
// DIAGNOSE ALERT REGISTER 11 // DIAGNOSE ALERT REGISTER 11
// //
void INA228::setDiagnoseAlert(uint16_t flags)
{
_writeRegister(INA228_DIAG_ALERT, flags);
}
uint16_t INA228::getDiagnoseAlert()
{
return _readRegister(INA228_DIAG_ALERT, 2);
}
// INA228.h has an enum for the bit fields.
void INA228::setDiagnoseAlertBit(uint8_t bit)
{
uint16_t value = _readRegister(INA228_DIAG_ALERT, 2);
value |= (1 << bit);
_writeRegister(INA228_DIAG_ALERT, value);
}
void INA228::clrDiagnoseAlertBit(uint8_t bit)
{
uint16_t value = _readRegister(INA228_DIAG_ALERT, 2);
value &= ~(1 << bit);
_writeRegister(INA228_DIAG_ALERT, value);
}
uint16_t INA228::getDiagnoseAlertBit(uint8_t bit)
{
uint16_t value = _readRegister(INA228_DIAG_ALERT, 2);
return (value >> bit) & 0x01;
}
//////////////////////////////////////////////////////// ////////////////////////////////////////////////////////
@ -325,8 +375,67 @@ uint16_t INA228::getShuntTemperatureCoefficent()
// THRESHOLD AND LIMIT REGISTERS 12-17 // THRESHOLD AND LIMIT REGISTERS 12-17
// //
void INA228::setShuntOvervoltageTH(uint16_t threshold)
{
_writeRegister(INA228_SOVL, threshold);
}
uint16_t INA228::getShuntOvervoltageTH()
{
return _readRegister(INA228_SOVL, 2);
}
void INA228::setShuntUndervoltageTH(uint16_t threshold)
{
_writeRegister(INA228_SUVL, threshold);
}
uint16_t INA228::getShuntUndervoltageTH()
{
return _readRegister(INA228_SUVL, 2);
}
void INA228::setBusOvervoltageTH(uint16_t threshold)
{
if (threshold > 0x7FFF) return;
_writeRegister(INA228_BOVL, threshold);
}
uint16_t INA228::getBusOvervoltageTH()
{
return _readRegister(INA228_BOVL, 2);
}
void INA228::setBusUndervoltageTH(uint16_t threshold)
{
if (threshold > 0x7FFF) return;
_writeRegister(INA228_BUVL, threshold);
}
uint16_t INA228::getBusUndervoltageTH()
{
return _readRegister(INA228_BUVL, 2);
}
void INA228::setTemperatureOverLimitTH(uint16_t threshold)
{
_writeRegister(INA228_TEMP_LIMIT, threshold);
}
uint16_t INA228::getTemperatureOverLimitTH()
{
return _readRegister(INA228_TEMP_LIMIT, 2);
}
void INA228::setPowerOverLimitTH(uint16_t threshold)
{
_writeRegister(INA228_POWER_LIMIT, threshold);
}
uint16_t INA228::getPowerOverLimitTH()
{
return _readRegister(INA228_POWER_LIMIT, 2);
}
//////////////////////////////////////////////////////// ////////////////////////////////////////////////////////

100
libraries/INA228/INA228.h
View File

@ -1,9 +1,9 @@
#pragma once #pragma once
// FILE: INA228.h // FILE: INA228.h
// AUTHOR: Rob Tillaart // AUTHOR: Rob Tillaart
// VERSION: 0.1.0 // VERSION: 0.1.1
// DATE: 2024-05-09 // DATE: 2024-05-09
// PURPOSE: Arduino library for INA228 power sensor // PURPOSE: Arduino library for INA228 voltage, current and power sensor.
// URL: https://github.com/RobTillaart/INA228 // URL: https://github.com/RobTillaart/INA228
// //
// Read the datasheet for the details // Read the datasheet for the details
@ -13,32 +13,7 @@
#include "Wire.h" #include "Wire.h"
#define INA228_LIB_VERSION "0.1.0" #define INA228_LIB_VERSION "0.1.1"
// TODO MOVE TO CPP CHECK DATASHEET.
// REGISTERS ADDRESS BITS RW
#define INA228_CONFIG 0x00 // 16 RW
#define INA228_ADC_CONFIG 0x01 // 16 RW
#define INA228_SHUNT_CAL 0x02 // 16 RW
#define INA228_SHUNT_TEMP_CO 0x03 // 16 RW
#define INA228_SHUNT_VOLTAGE 0x04 // 24 R-
#define INA228_BUS_VOLTAGE 0x05 // 24 R-
#define INA228_TEMPERATURE 0x06 // 16 R-
#define INA228_CURRENT 0x07 // 24 R-
#define INA228_POWER 0x08 // 24 R-
#define INA228_ENERGY 0x09 // 40 R-
#define INA228_CHARGE 0x0A // 40 R-
#define INA228_DIAG_ALERT 0x0B // 16 RW
#define INA228_SOVL 0x0C // 16 RW
#define INA228_SUVL 0x0D // 16 RW
#define INA228_BOVL 0x0E // 16 RW
#define INA228_BUVL 0x0F // 16 RW
#define INA228_TEMP_LIMIT 0x10 // 16 RW
#define INA228_POWER_LIMIT 0x11 // 16 RW
#define INA228_MANUFACTURER 0x3E // 16 R-
#define INA228_DEVICE_ID 0x3F // 16 R-
// for setMode() and getMode() // for setMode() and getMode()
@ -89,6 +64,26 @@ enum ina228_timing_enum {
}; };
// for diagnose/alert() bit fields.
enum ina228_diag_enum {
INA228_DIAG_MEMORY_STATUS = 0,
INA228_DIAG_CONVERT_COMPLETE = 1,
INA228_DIAG_POWER_OVER_LIMIT = 2,
INA228_DIAG_BUS_UNDER_LIMIT = 3,
INA228_DIAG_BUS_OVER_LIMIT = 4,
INA228_DIAG_SHUNT_UNDER_LIMIT = 5,
INA228_DIAG_SHUNT_OVER_LIMIT = 6,
INA228_DIAG_TEMP_OVER_LIMIT = 7,
INA228_DIAG_RESERVED = 8,
INA228_DIAG_MATH_OVERFLOW = 9,
INA228_DIAG_CHARGE_OVERFLOW = 10,
INA228_DIAG_ENERGY_OVERFLOW = 11,
INA228_DIAG_ALERT_POLARITY = 12,
INA228_DIAG_SLOW_ALERT = 13,
INA228_DIAG_CONVERT_READY = 14,
INA228_DIAG_ALERT_LATCH = 15
};
class INA228 class INA228
{ {
@ -129,10 +124,11 @@ public:
// //
// CONFIG REGISTER 0 // CONFIG REGISTER 0
// read datasheet for details. // read datasheet for details, section 7.6.1.1, page 22
//
void reset(); void reset();
// val: 0 == normal operation, 1 = clear registers // value: 0 == normal operation, 1 = clear registers
bool setAccumulation(uint8_t val); bool setAccumulation(uint8_t value);
bool getAccumulation(); bool getAccumulation();
// Conversion delay in 0..255 steps of 2 ms // Conversion delay in 0..255 steps of 2 ms
void setConversionDelay(uint8_t steps); void setConversionDelay(uint8_t steps);
@ -145,9 +141,11 @@ public:
// //
// CONFIG ADC REGISTER 1 // CONFIG ADC REGISTER 1
// read datasheet for details. // read datasheet for details, section 7.6.1.2, page 22++
//
bool setMode(uint8_t mode = INA228_MODE_CONT_TEMP_BUS_SHUNT); bool setMode(uint8_t mode = INA228_MODE_CONT_TEMP_BUS_SHUNT);
uint8_t getMode(); uint8_t getMode();
// default value = ~1 milliseconds for all.
bool setBusVoltageConversionTime(uint8_t bvct = INA228_1052_us); bool setBusVoltageConversionTime(uint8_t bvct = INA228_1052_us);
uint8_t getBusVoltageConversionTime(); uint8_t getBusVoltageConversionTime();
bool setShuntVoltageConversionTime(uint8_t svct = INA228_1052_us); bool setShuntVoltageConversionTime(uint8_t svct = INA228_1052_us);
@ -168,7 +166,7 @@ public:
// //
// SHUNT TEMPERATURE COEFFICIENT REGISTER 3 // SHUNT TEMPERATURE COEFFICIENT REGISTER 3
// read datasheet for details. use with care. // read datasheet for details, page 16.
// ppm = 0..16383. // ppm = 0..16383.
bool setShuntTemperatureCoefficent(uint16_t ppm = 0); bool setShuntTemperatureCoefficent(uint16_t ppm = 0);
uint16_t getShuntTemperatureCoefficent(); uint16_t getShuntTemperatureCoefficent();
@ -176,15 +174,32 @@ public:
// //
// DIAGNOSE ALERT REGISTER 11 (0x0B) // DIAGNOSE ALERT REGISTER 11 (0x0B)
// read datasheet for details. use with care. // read datasheet for details, section 7.6.1.12, page 26++.
// TODO //
void setDiagnoseAlert(uint16_t flags);
uint16_t getDiagnoseAlert();
// INA228.h has an enum for the bit fields.
void setDiagnoseAlertBit(uint8_t bit);
void clrDiagnoseAlertBit(uint8_t bit);
uint16_t getDiagnoseAlertBit(uint8_t bit);
// //
// THRESHOLD AND LIMIT REGISTERS 12-17 // THRESHOLD AND LIMIT REGISTERS 12-17
// read datasheet for details. use with care. // read datasheet for details, section 7.3.7, page 16++
// TODO //
void setShuntOvervoltageTH(uint16_t threshold);
uint16_t getShuntOvervoltageTH();
void setShuntUndervoltageTH(uint16_t threshold);
uint16_t getShuntUndervoltageTH();
void setBusOvervoltageTH(uint16_t threshold);
uint16_t getBusOvervoltageTH();
void setBusUndervoltageTH(uint16_t threshold);
uint16_t getBusUndervoltageTH();
void setTemperatureOverLimitTH(uint16_t threshold);
uint16_t getTemperatureOverLimitTH();
void setPowerOverLimitTH(uint16_t threshold);
uint16_t getPowerOverLimitTH();
// //
@ -195,18 +210,11 @@ public:
uint16_t getRevision(); uint16_t getRevision();
/////////////////// private:
//
// SHOULD BE PRIVATE
//
uint32_t _readRegister(uint8_t reg, uint8_t bytes); // max 4. uint32_t _readRegister(uint8_t reg, uint8_t bytes); // max 4.
float _readRegisterF(uint8_t reg, uint8_t bytes); float _readRegisterF(uint8_t reg, uint8_t bytes);
uint16_t _writeRegister(uint8_t reg, uint16_t value); uint16_t _writeRegister(uint8_t reg, uint16_t value);
private:
float _current_LSB; float _current_LSB;
float _shunt; float _shunt;
float _maxCurrent; float _maxCurrent;

150
libraries/INA228/README.md
View File

@ -18,37 +18,51 @@ Arduino library for the INA228 power sensor.
**Experimental** **Experimental**
The library for the INA228 power sensor differs from the better This library controls the INA228, a device that measures voltage,
known INA226 in that it has a 20 bit ADC. current, power, temperature and more.
The INA228 sensor differs from the better known INA226.
Most important difference is that the INA228 has a 20 bit ADC.
This should result in higher precision however this is expected to only This should result in higher precision however this is expected to only
be visible with stable loads and low noise. be visible with stable loads and low noise.
Another important difference is that the INA228 works up to 85 Volts, Another important difference is that the INA228 works up to 85 Volts,
which is more than twice the 36 volt of the INA226. which is more than twice the 36 volt of the INA226.
The INA228 has a build in temperature sensor (±1°C) to be used for
monitoring and temperature compensation.
Finally the INA228 has an **energy** and **charge** register.
These are values accumulated over time, and only work in continuous mode.
(to be investigated what those mean ).
The initial release 0.1.0 is **not** tested verified with hardware yet. The INA provides also provides an alert line, to generate an interrupt
Furthermore not all functionality is implemented, especially the diagnose in case a predefined threshold has been met.
alert, threshold and limits. This can be an under- or over-voltage, temperature or power limit.
Feedback as always is welcome. The library is **not** tested and verified with hardware yet.
Read datasheet for details.
==> **USE WITH CARE** ==> **USE WITH CARE**
The INA228 is a voltage, current and power measurement device. Feedback as always is welcome.
A few important maxima, see datasheet.
| description | max | unit | notes | The INA228 is a voltage, current and power measurement device.
|:--------------|------:|-------:|:------| A few important data, see datasheet.
| bus voltage | 85 | Volt | unclear for how long.
| shunt voltage | ?? | mVolt | | description | value | notes |
| current | 10 | Ampere | DC only |:---------------|:-----------:|:--------|
| bus voltage | 85 Volt | unclear for how long.
| shunt voltage | ?? mVolt |
| current | 10 Ampere | DC only
| ADC | 20 bit |
| alert timing | 75 µs. |
Read the datasheet for the details, Section 7, Page 12++.
#### Special characters #### Special characters
- Ω == Ohm = ALT-234 (Windows) - Ω == Ohm = ALT-234 (Windows)
- µ == micro = ALT-0181 (Windows) - µ == micro = ALT-0181 (Windows)
- ° == degree = ALT-0176 (Windows)
- ± == plus minus = ALT-177 (Windows)
#### Related #### Related
@ -70,26 +84,26 @@ The sensor can have 16 different I2C addresses,
which depends on how the A0 and A1 address lines which depends on how the A0 and A1 address lines
are connected to the SCL, SDA, GND and VCC pins. are connected to the SCL, SDA, GND and VCC pins.
See table - from datasheet table 2, page18. See table - from datasheet table 7-2, page 19.
| A1 | A0 | ADDRESS | | A1 | A0 | Addr | HEX |
|:-----:|:-----:|:----------:| |:-----:|:-----:|:------:|:------:|
| GND | GND | 1000000 | | GND | GND | 64 | 0x40 |
| GND | VS | 1000001 | | GND | VS | 65 | 0x41 |
| GND | SDA | 1000010 | | GND | SDA | 66 | 0x42 |
| GND | SCL | 1000011 | | GND | SCL | 67 | 0x43 |
| VS | GND | 1000100 | | VS | GND | 68 | 0x44 |
| VS | VS | 1000101 | | VS | VS | 69 | 0x45 |
| VS | SDA | 1000110 | | VS | SDA | 70 | 0x46 |
| VS | SCL | 1000111 | | VS | SCL | 71 | 0x47 |
| SDA | GND | 1001000 | | SDA | GND | 72 | 0x48 |
| SDA | VS | 1001001 | | SDA | VS | 73 | 0x49 |
| SDA | SDA | 1001010 | | SDA | SDA | 74 | 0x4A |
| SDA | SCL | 1001011 | | SDA | SCL | 75 | 0x4B |
| SCL | GND | 1001100 | | SCL | GND | 76 | 0x4C |
| SCL | VS | 1001101 | | SCL | VS | 77 | 0x4D |
| SCL | SDA | 1001110 | | SCL | SDA | 78 | 0x4E |
| SCL | SCL | 1001111 | | SCL | SCL | 79 | 0x4F |
#### Performance #### Performance
@ -127,7 +141,11 @@ Also the value is not meaningful if there is no shunt connected.
- **float getEnergy()** return Joule (elaborate). - **float getEnergy()** return Joule (elaborate).
- **float getCharge()** return Coulomb (elaborate). - **float getCharge()** return Coulomb (elaborate).
The library has helper functions to convert above output to a more appropriate scale of units. The **getEnergy()** and **getCharge()** only have meaning in continuous
mode. See page 13++.
The library has helper functions to convert above output to a more
appropriate scale of units.
Helper functions for the milli scale. Helper functions for the milli scale.
@ -150,10 +168,10 @@ Helper functions for the micro scale.
#### Configuration #### Configuration
to elaborate Read datasheet for details, section 7.6.1.1, page 22
- **void reset()** - **void reset()**
- **bool setAccumulation(uint8_t val)** val: 0 == normal operation, 1 = clear registers - **bool setAccumulation(uint8_t value)** value: 0 == normal operation, 1 = clear registers
- **bool getAccumulation()** return set value. - **bool getAccumulation()** return set value.
- **void setConversionDelay(uint8_t steps)** Conversion delay in 0..255 steps of 2 ms - **void setConversionDelay(uint8_t steps)** Conversion delay in 0..255 steps of 2 ms
- **uint8_t getConversionDelay()** return set value. - **uint8_t getConversionDelay()** return set value.
@ -164,7 +182,7 @@ to elaborate
#### Configuration ADC #### Configuration ADC
to elaborate Read datasheet for details, section 7.6.1.2, page 22++
- **bool setMode(uint8_t mode = INA228_MODE_CONT_TEMP_BUS_SHUNT)** - **bool setMode(uint8_t mode = INA228_MODE_CONT_TEMP_BUS_SHUNT)**
- **uint8_t getMode()** return set value. - **uint8_t getMode()** return set value.
@ -224,30 +242,63 @@ to elaborate
#### Shunt Calibration #### Shunt Calibration
To elaborate To elaborate, read datasheet for details.
- **int setMaxCurrentShunt(float maxCurrent, float shunt)** - **int setMaxCurrentShunt(float maxCurrent, float shunt)**
- **bool isCalibrated()** is valid calibration value. - **bool isCalibrated()** is valid calibration value.
- **float getMaxCurrent()** return set value - **float getMaxCurrent()** return set value.
- **float getShunt()** return set value - **float getShunt()** return set value.
#### Shunt temperature coefficient #### Shunt temperature coefficient
To elaborate Read datasheet for details, page 16.
- **bool setShuntTemperatureCoefficent(uint16_t ppm = 0)** ppm = 0..16383. The INA228 can compensate for shunt temperature variance to increase accuracy.
The reference temperature is 25°C.
- Enter the coefficient with **setShuntTemperatureCoefficent(uint16_t ppm)**.
- Enable the function with **setTemperatureCompensation(true)**.
In formula:
```
Radjusted = Rnominal + (Rnominal x (temperature - 25) x PPM) * 10e-6;
```
- **bool setShuntTemperatureCoefficent(uint16_t ppm = 0)** ppm = 0..16383 ppm/°C.
Default 0 for easy reset.
- **uint16_t getShuntTemperatureCoefficent()** return set value. - **uint16_t getShuntTemperatureCoefficent()** return set value.
#### Diagnose alert #### Diagnose alert
TODO Read datasheet for details, section 7.6.1.12, page 26++.
- **void setDiagnoseAlert(uint16_t flags)** set all flags as bit mask.
- **uint16_t getDiagnoseAlert()** return all flags as bit mask.
INA228.h has an enum for the bit fields.
- **void setDiagnoseAlertBit(uint8_t bit)** set individual bit.
- **void clrDiagnoseAlertBit(uint8_t bit)** clear individual bit.
- **uint16_t getDiagnoseAlertBit(uint8_t bit)** return individual bit.
#### Threshold and Limits #### Threshold and Limits
TODO Read datasheet for details, section 7.3.7, page 16++
- **void setShuntOvervoltageTH(uint16_t threshold)**
- **uint16_t getShuntOvervoltageTH()**
- **void setShuntUndervoltageTH(uint16_t threshold)**
- **uint16_t getShuntUndervoltageTH()**
- **void setBusOvervoltageTH(uint16_t threshold)**
- **uint16_t getBusOvervoltageTH()**
- **void setBusUndervoltageTH(uint16_t threshold)**
- **uint16_t getBusUndervoltageTH()**
- **void setTemperatureOverLimitTH(uint16_t threshold)**
- **uint16_t getTemperatureOverLimitTH()**
- **void setPowerOverLimitTH(uint16_t threshold)**
- **uint16_t getPowerOverLimitTH()**
#### Manufacturer and ID #### Manufacturer and ID
@ -262,15 +313,14 @@ TODO
#### Must #### Must
- get hardware, test and verify. - get hardware.
- update documentation. - test and verify.
- update functionality.
- diagnose, thresholds limits
#### Should #### Should
- write examples. - update documentation.
- write examples, (please share yours).
- keep in sync with INA226 where possible. - keep in sync with INA226 where possible.

23
libraries/INA228/keywords.txt
View File

@ -33,6 +33,7 @@ getPower_uW KEYWORD2
getEnergy_uJ KEYWORD2 getEnergy_uJ KEYWORD2
getCharge_uC KEYWORD2 getCharge_uC KEYWORD2
reset KEYWORD2 reset KEYWORD2
setAccumulation KEYWORD2 setAccumulation KEYWORD2
getAccumulation KEYWORD2 getAccumulation KEYWORD2
@ -43,6 +44,7 @@ getTemperatureCompensation KEYWORD2
setADCRange KEYWORD2 setADCRange KEYWORD2
getADCRange KEYWORD2 getADCRange KEYWORD2
setMode KEYWORD2 setMode KEYWORD2
getMode KEYWORD2 getMode KEYWORD2
setBusVoltageConversionTime KEYWORD2 setBusVoltageConversionTime KEYWORD2
@ -54,6 +56,7 @@ getTemperatureConversionTime KEYWORD2
setAverage KEYWORD2 setAverage KEYWORD2
getAverage KEYWORD2 getAverage KEYWORD2
setMaxCurrentShunt KEYWORD2 setMaxCurrentShunt KEYWORD2
isCalibrated KEYWORD2 isCalibrated KEYWORD2
getMaxCurrent KEYWORD2 getMaxCurrent KEYWORD2
@ -63,6 +66,26 @@ setShuntTemperatureCoefficent KEYWORD2
getShuntTemperatureCoefficent KEYWORD2 getShuntTemperatureCoefficent KEYWORD2
setDiagnoseAlert KEYWORD2
getDiagnoseAlert KEYWORD2
setDiagnoseAlertBit KEYWORD2
clrDiagnoseAlertBit KEYWORD2
getDiagnoseAlertBit KEYWORD2
setShuntOvervoltageTH KEYWORD2
getShuntOvervoltageTH KEYWORD2
setShuntUndervoltageTH KEYWORD2
getShuntUndervoltageTH KEYWORD2
setBusOvervoltageTH KEYWORD2
getBusOvervoltageTH KEYWORD2
setBusUndervoltageTH KEYWORD2
getBusUndervoltageTH KEYWORD2
setTemperatureOverLimitTH KEYWORD2
getTemperatureOverLimitTH KEYWORD2
setPowerOverLimitTH KEYWORD2
getPowerOverLimitTH KEYWORD2
getManufacturer KEYWORD2 getManufacturer KEYWORD2
getDieID KEYWORD2 getDieID KEYWORD2

4
libraries/INA228/library.json
View File

@ -1,7 +1,7 @@
{ {
"name": "INA228", "name": "INA228",
"keywords": "power,ampere,voltage,volts,current", "keywords": "power,ampere,voltage,volts,current",
"description": "Arduino library for INA228 power sensor", "description": "Arduino library for INA228 voltage, current and power sensor.",
"authors": "authors":
[ [
{ {
@ -15,7 +15,7 @@
"type": "git", "type": "git",
"url": "https://github.com/RobTillaart/INA228.git" "url": "https://github.com/RobTillaart/INA228.git"
}, },
"version": "0.1.0", "version": "0.1.1",
"license": "MIT", "license": "MIT",
"frameworks": "*", "frameworks": "*",
"platforms": "*", "platforms": "*",

4
libraries/INA228/library.properties
View File

@ -1,8 +1,8 @@
name=INA228 name=INA228
version=0.1.0 version=0.1.1
author=Rob Tillaart <rob.tillaart@gmail.com> author=Rob Tillaart <rob.tillaart@gmail.com>
maintainer=Rob Tillaart <rob.tillaart@gmail.com> maintainer=Rob Tillaart <rob.tillaart@gmail.com>
sentence=Arduino library for INA228 power sensor sentence=Arduino library for INA228 voltage, current and power sensor.
paragraph=Voltage current Volt Ampere paragraph=Voltage current Volt Ampere
category=Data Processing category=Data Processing
url=https://github.com/RobTillaart/INA228 url=https://github.com/RobTillaart/INA228