GY-63_MS5611/libraries/MHZCO2/MHZCO2.cpp

//
//    FILE: MHZCO2.cpp
//  AUTHOR: Rob Tillaart
// VERSION: 0.1.4
// PURPOSE: Arduino Library for MHZ series CO2 sensors
//    DATE: 2020-05-05
//     URL: https://github.com/RobTillaart/MHZCO2


#include "MHZCO2.h"


MHZCO2::MHZCO2()
{
  _startTime = millis();
}


void MHZCO2::begin(Stream * str)
{
  _str = str;
  _lastMeasurement = 0;
  _PPM             = 0;
  _CO2             = 0;
  _temperature     = 0;
  _accuracy        = 0;
  _minCO2          = 0;
}


uint32_t MHZCO2::uptime()
{
  return millis() - _startTime;
}


void MHZCO2::setPPM(uint16_t PPM)
{
  _PPM = PPM;
  uint8_t data[9] = {0xFF, 0x01, 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
  data[8] = PPM >> 8;
  data[7] = PPM & 0xFF;
  data[8] = checksum(data);
  send(data, 9);
}


uint16_t MHZCO2::getPPM()
{
  return _PPM;
}


int MHZCO2::measure()
{
  _lastMeasurement = millis();

  uint8_t data[9] = {0xFF, 0x01, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
  data[8] = checksum(data);
  send(data, 9);

  int rv = receive(data);
  //  allow partial good data?
  if ((rv == MHZCO2_OK) || (rv == MHZCO2_ERROR_CRC))
  {
    _CO2         = data[2] * 256 + data[3];
    _temperature = data[4] - 40;
    _accuracy    = data[5];
    _minCO2      = data[6] * 256 + data[7];
  }

  return rv;
}


uint32_t MHZCO2::lastMeasurement()
{
  return _lastMeasurement;
}


int MHZCO2::getCO2()
{
  return _CO2;
};


int MHZCO2::getTemperature()
{
  return _temperature;
};


int MHZCO2::getAccuracy()
{
  return _accuracy;
}


int MHZCO2::getMinCO2()
{
  return _minCO2;
};


void MHZCO2::calibrateZero()
{
  uint8_t data[9] = {0xFF, 0x01, 0x87, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
  data[8] = checksum(data);
  send(data, 9);
}


void MHZCO2::calibrateSpan(uint16_t span)
{
  uint8_t data[9] = {0xFF, 0x01, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
  data[3] = span >> 8;
  data[4] = span & 0xFF;
  data[8] = checksum(data);
  send(data, 9);
}


void MHZCO2::calibrateAuto(bool mode)
{
  uint8_t data[9] = {0xFF, 0x01, 0x79, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
  if (mode) data[3] = 0xA0;
  data[8] = checksum(data);
  send(data, 9);
}


/////////////////////////////////////////////////
//
//  PROTECTED
//
void MHZCO2::send(uint8_t * data, uint8_t len)
{
  _str->write(data, len);
  _str->flush();
}


int MHZCO2::receive(uint8_t * answer)
{
  uint32_t start = millis();
  while (_str->available() == 0)
  {
    if (millis() - start > 1000) return MHZCO2_TIMEOUT;
  }
  for (uint8_t i = 0; i < 9; i++)
  {
    answer[i] = _str->read();
  }
  //  verify checksum
  if (answer[8] != checksum(answer)) return MHZCO2_ERROR_CRC;
  return MHZCO2_OK;
}


uint8_t MHZCO2::checksum(uint8_t *arr)
{
  uint8_t sum = 0;
  for (uint8_t i = 1; i < 8; i++)
  {
    sum += arr[i];
  }
  sum = 0xFF - sum;
  return sum + 1;
}


/* slightly faster
uint8_t MHZCO2::checksum(uint8_t *arr)
{
  uint8_t sum = 0xFF;
  for (uint8_t i = 1; i < 8; i++) sum -= arr[i];
  return sum + 1;
}
*/


/////////////////////////////////////////////////////////
//
//  DERIVED CLASSES
//
MHZ1311A::MHZ1311A() : MHZCO2()
{
}

MHZ19::MHZ19() : MHZCO2()
{
}

MHZ19B::MHZ19B() : MHZCO2()
{
}

MHZ19C::MHZ19C() : MHZCO2()
{
}

MHZ19D::MHZ19D() : MHZCO2()
{
}

MHZ19E::MHZ19E() : MHZCO2()
{
}



//  -- END OF FILE --