GY-63_MS5611/libraries/Max44009/Max44009.h

#ifndef MAX44009_H
#define MAX44009_H
//
//    FILE: Max44009.h
//  AUTHOR: Rob dot Tillaart at gmail dot com
// VERSION: 0.1.5
// PURPOSE: library for MAX44009 lux sensor Arduino
// HISTORY: See Max440099.cpp
//
// Released to the public domain
//

#include "Wire.h"

#if defined(ARDUINO) && ARDUINO >= 100
#include "Arduino.h"
#else
#include "WProgram.h"
#endif

#include "Printable.h"

#define MAX44009_LIB_VERSION "0.1.5"

// REGISTERS
#define MAX44009_INTERRUPT_STATUS   0x00
#define MAX44009_INTERRUPT_ENABLE   0x01
#define MAX44009_CONFIGURATION      0x02
#define MAX44009_LUX_READING        0x03  // (03 = HIGH BYTE, (04 = LOW BYTE
#define MAX44009_THRESHOLD_HIGH     0x05
#define MAX44009_THRESHOLD_LOW      0x06
#define MAX44009_THRESHOLD_TIMER    0x07

// CONFIGURATION MASKS
#define MAX44009_CFG_CONTINUOUS     0x80
#define MAX44009_CFG_MANUAL         0x40
#define MAX44009_CFG_CDR            0x08
#define MAX44009_CFG_TIMER          0x07


class Max44009
{
public:
    Max44009(uint8_t address);

    double  getLux();
    int     getError();

    void    setHighThreshold(double);
    double  getHighThreshold(void);
    void    setLowThreshold(double);
    double  getLowThreshold(void);
    void    setThresholdTimer(uint8_t);
    uint8_t getThresholdTimer();

    void    enableInterrupt()    { write(MAX44009_INTERRUPT_ENABLE, 1); };
    void    disableInterrupt()   { write(MAX44009_INTERRUPT_ENABLE, 0); };
    bool    interruptEnabled()   { read(MAX44009_INTERRUPT_ENABLE) & 0x01; };
    uint8_t getInterruptStatus() { read(MAX44009_INTERRUPT_STATUS) & 0x01; };

    // check datasheet for detailed behavior
    void    setConfiguration(uint8_t);
    uint8_t getConfiguration();
    void    setAutomaticMode();
    void    setContinuousMode();
    // CDR = Current Divisor Ratio
    // CDR = 1 ==> only 1/8th is measured
    // TIM = Time Integration Measurement (table)
    // 000  800ms
    // 001  400ms
    // 010  200ms
    // 011  100ms
    // 100   50ms
    // 101   25ms
    // 110   12.5ms
    // 111    6.25ms
    void    setManualMode(uint8_t CDR, uint8_t TIM);

private:
    void    setThreshold(uint8_t, double);
    double  getThreshold(uint8_t);

    uint16_t read(uint8_t reg, uint8_t bytes = 1);
    void     write(uint8_t, uint8_t);

    uint8_t _address;
    uint16_t _data;
    int     _error;
};
#endif