mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
115 lines
4.0 KiB
Markdown
115 lines
4.0 KiB
Markdown
|
|
||
|
|
[](https://github.com/marketplace/actions/arduino_ci)
|
||
|
|
[](https://github.com/RobTillaart/HC4053/actions/workflows/arduino-lint.yml)
|
||
|
|
[](https://github.com/RobTillaart/HC4053/actions/workflows/jsoncheck.yml)
|
||
|
|
[](https://github.com/RobTillaart/HC4053/blob/master/LICENSE)
|
||
|
|
[](https://github.com/RobTillaart/HC4053/releases)
|
||
|
|
|
||
|
|
|
||
|
|
# HC4053
|
||
|
|
|
||
|
|
HC4053 is an Arduino library for a HC4053 3x2 channel multiplexer.
|
||
|
|
|
||
|
|
|
||
|
|
## Description
|
||
|
|
|
||
|
|
HC4053 is a library to control the CD74HC4053 3x2 channel
|
||
|
|
multiplexer / demultiplexer and compatible devices.
|
||
|
|
|
||
|
|
The HC4053 is in fact three separate controllable switches in one,
|
||
|
|
and every switch can be set indepently in one of two positions.
|
||
|
|
This is functionaly different from both the 4051, 4052 and 4067
|
||
|
|
in which there is only one channel selection
|
||
|
|
|
||
|
|
The independent channel selection is done with three select lines **A, B, C**.
|
||
|
|
|
||
|
|
The device can be enabled/disabled by the enable line **INH**
|
||
|
|
|
||
|
|
|
||
|
|
#### Compatibles
|
||
|
|
|
||
|
|
to elaborate.
|
||
|
|
|
||
|
|
|
||
|
|
#### Related to
|
||
|
|
|
||
|
|
- https://github.com/RobTillaart/HC4051
|
||
|
|
- https://github.com/RobTillaart/HC4052
|
||
|
|
- https://github.com/RobTillaart/HC4053
|
||
|
|
- https://github.com/RobTillaart/HC4067
|
||
|
|
|
||
|
|
|
||
|
|
## Hardware connection
|
||
|
|
|
||
|
|
Typical connection is to connect the three **select pins** to three IO Pins of your board.
|
||
|
|
|
||
|
|
The optional **enablePin (INH)** must be connected to GND if not used.
|
||
|
|
This way the device is continuous enabled.
|
||
|
|
|
||
|
|
Example multiplexing 3x analog in.
|
||
|
|
|
||
|
|
```
|
||
|
|
processor HC4053
|
||
|
|
+-------------+ +-------------+
|
||
|
|
| | | |
|
||
|
|
| E |------------->| INH |
|
||
|
|
| | | |
|
||
|
|
| A |------------->| A X0 |
|
||
|
|
| analog X |<-------------| X X1 |
|
||
|
|
| | | |
|
||
|
|
| B |------------->| B Y0 |
|
||
|
|
| analog Y |<-------------| Y Y1 |
|
||
|
|
| | | |
|
||
|
|
| C |------------->| C Z0 |
|
||
|
|
| analog Z |<-------------| Z Z1 |
|
||
|
|
| | | |
|
||
|
|
| | | |
|
||
|
|
| | | |
|
||
|
|
| GND |--------------| GND |
|
||
|
|
| | | VCC |
|
||
|
|
| | | |
|
||
|
|
+-------------+ +-------------+
|
||
|
|
```
|
||
|
|
|
||
|
|
|
||
|
|
## Interface
|
||
|
|
|
||
|
|
```cpp
|
||
|
|
#include "HC4053.h"
|
||
|
|
```
|
||
|
|
|
||
|
|
#### Core
|
||
|
|
|
||
|
|
- **HC4053(uint8_t A, uint8_t B, uint8_t C, uint8_t enablePin = 255)** constructor.
|
||
|
|
Set the three select pins and optional the enable pin.
|
||
|
|
If the enablePin == 255 it is considered not used.
|
||
|
|
- **void setChannel(uint8_t channel)** sets A, B and C to channel in one call.
|
||
|
|
Think of it as a master switch.
|
||
|
|
Valid values 0, 1, this value is not checked, only last bit is used.
|
||
|
|
Note the channels will not change at the very same moment.
|
||
|
|
- **void setChannelA(uint8_t channel)** sets A to channel.
|
||
|
|
Valid values 0, 1, this value is not checked, only last bit is used.
|
||
|
|
- **void setChannelB(uint8_t channel)** sets B to channel.
|
||
|
|
Valid values 0, 1, this value is not checked, only last bit is used.
|
||
|
|
- **void setChannelC(uint8_t channel)** sets C to channel.
|
||
|
|
Valid values 0, 1, this value is not checked, only last bit is used.
|
||
|
|
- **uint8_t getChannelA()** get current A channel 0 or 1.
|
||
|
|
- **uint8_t getChannelB()** get current B channel 0 or 1.
|
||
|
|
- **uint8_t getChannelC()** get current C channel 0 or 1.
|
||
|
|
|
||
|
|
|
||
|
|
#### Enable
|
||
|
|
|
||
|
|
These functions work only if enablePin is set in the constructor.
|
||
|
|
|
||
|
|
- **void enable()** idem.
|
||
|
|
- **void disable()** idem.
|
||
|
|
- **bool isEnabled()** idem.
|
||
|
|
Also returns true if enablePin is not set.
|
||
|
|
|
||
|
|
|
||
|
|
## Future
|
||
|
|
|
||
|
|
- keep in sync with HC4067 et.al.
|
||
|
|
|