mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
85 lines
2.8 KiB
Markdown
85 lines
2.8 KiB
Markdown
|
|
||
|
|
[](https://github.com/marketplace/actions/arduino_ci)
|
||
|
|
[](https://github.com/RobTillaart/ADG726/actions/workflows/arduino-lint.yml)
|
||
|
|
[](https://github.com/RobTillaart/ADG726/actions/workflows/jsoncheck.yml)
|
||
|
|
[](https://github.com/RobTillaart/ADG726/blob/master/LICENSE)
|
||
|
|
[](https://github.com/RobTillaart/ADG726/releases)
|
||
|
|
|
||
|
|
|
||
|
|
# ADG726
|
||
|
|
|
||
|
|
Arduino library for ADG726 - 16 to 1 channel (2x) multiplexer.
|
||
|
|
|
||
|
|
|
||
|
|
## Description
|
||
|
|
|
||
|
|
**Experimental**
|
||
|
|
|
||
|
|
ADG726 is an Arduino class that controls two 16 to 1 multiplexers
|
||
|
|
over a **parallel** interface.
|
||
|
|
Only one of the 16 channels can be connected at the same time.
|
||
|
|
The channels can be set per multiplexer or together in one call.
|
||
|
|
The library also support to set them all off (17th state).
|
||
|
|
|
||
|
|
On power-up, all switches are in the OFF state.
|
||
|
|
|
||
|
|
This library can be used e.g. to connect 16 analog devices to
|
||
|
|
one analog port, or to select between 16 DHT22 sensors.
|
||
|
|
|
||
|
|
No tests with hardware have been done yet, so use with care.
|
||
|
|
Feedback welcome!
|
||
|
|
|
||
|
|
|
||
|
|
#### Related
|
||
|
|
|
||
|
|
- https://github.com/RobTillaart/HC4051 (1x8 mux)
|
||
|
|
- https://github.com/RobTillaart/HC4052 (2x8 mux)
|
||
|
|
- https://github.com/RobTillaart/HC4053 (3x2 mux)
|
||
|
|
- https://github.com/RobTillaart/HC4067 (1x16 mux)
|
||
|
|
- https://github.com/RobTillaart/ADG725 (2x16 mux)
|
||
|
|
- https://github.com/RobTillaart/ADG726 (2x16 mux)
|
||
|
|
- https://github.com/RobTillaart/ADG731 (1x32 mux)
|
||
|
|
- https://github.com/RobTillaart/ADG732 (1x32 mux)
|
||
|
|
|
||
|
|
|
||
|
|
## Interface
|
||
|
|
|
||
|
|
```cpp
|
||
|
|
#include "ADG726.h"
|
||
|
|
```
|
||
|
|
|
||
|
|
- **ADG726(uint8_t A, uint8_t B, uint8_t C, uint8_t D, uint8_t CSA, uint8_t CSB, uint8_t EN, uint8_t WR)** constructor.
|
||
|
|
- **ADG726(uint8_t address[4], uint8_t CSA, uint8_t CSB, uint8_t EN, uint8_t WR)** constructor.
|
||
|
|
- **void setChannel(uint8_t channel)** set the current channel for both A and B.
|
||
|
|
Valid values for channel are 0..15.
|
||
|
|
- **void setChannelA(uint8_t channel)** set the current channel for A only.
|
||
|
|
Valid values for channel are 0..15.
|
||
|
|
- **void setChannelB(uint8_t channel)** set the current channel for B only.
|
||
|
|
Valid values for channel are 0..15.
|
||
|
|
- **uint8_t getChannelA()** get last set channel A == 0..15 or ADG726_ALLOFF.
|
||
|
|
- **uint8_t getChannelB()** get last set channel B == 0..15 or ADG726_ALLOFF.
|
||
|
|
- **uint8_t channelCount()** returns 16 for ADG726.
|
||
|
|
- **void allOff()** sets all channels to OFF, none selected.
|
||
|
|
|
||
|
|
|
||
|
|
## Future
|
||
|
|
|
||
|
|
#### Must
|
||
|
|
|
||
|
|
- improve documentation
|
||
|
|
- insert schematic
|
||
|
|
- test with hardware
|
||
|
|
- keep in sync with ADG725 (interface)
|
||
|
|
|
||
|
|
#### Should
|
||
|
|
|
||
|
|
- add examples
|
||
|
|
- check performance
|
||
|
|
|
||
|
|
#### Could
|
||
|
|
|
||
|
|
|
||
|
|
#### Wont
|
||
|
|
|
||
|
|
|