GY-63_MS5611/libraries/TSL235R/examples/TSL235R_pulses/TSL235R_pulses.ino

//
//    FILE: TSL235R_pulses.ino
//  AUTHOR: Rob Tillaart
// VERSION: 0.1.1
// PURPOSE: demo
//    DATE: 2021-05-29

// NOTE
// This code will work up to ~150 kHz on an Arduino UNO
// above that pulses come in faster than the code can reliably handle

//
// Digital Pin layout ARDUINO
// =============================
//  2     IRQ 0    - to TSL235R
//  3     IRQ 1    - to TSL235R
// 
// PIN 1 - GND
// PIN 2 - VDD - 5V
// PIN 3 - SIGNAL
//


#include "TSL235R.h"

TSL235R  mySensor;

volatile uint32_t cnt1 = 0;
uint32_t oldcnt1 = 0;
uint32_t t = 0;
uint32_t lastMeasurement = 0;


void count_irq1()
{
  cnt1++;
}


///////////////////////////////////////////////////////////////////
//
// SETUP
//
void setup()
{
  Serial.begin(115200);
  Serial.println(__FILE__);

  pinMode(2, INPUT_PULLUP);
  attachInterrupt(0, count_irq1, FALLING);

  mySensor.setWavelength(450);
}


void loop()
{
  uint32_t now = millis();
  if (now - lastMeasurement >= 1000)
  {

    t = cnt1;
    uint32_t Hz = t - oldcnt1;
    oldcnt1 = t;
    
    Serial.print("irradiance(Hz):\t\t");
    Serial.print(mySensor.irradiance(Hz));   // assumption 1 second
    Serial.println(" uW/cm2");

    Serial.print("irradiance(puls, time):\t");
    Serial.print(mySensor.irradiance(Hz, now - lastMeasurement));  // accurate time
    Serial.println(" uW/cm2");

    lastMeasurement = now;
  }
}

// -- END OF FILE --