mirror of
https://github.com/alexandrebobkov/ESP-Nodes.git
synced 2024-10-05 20:47:50 -04:00
92 lines
2.5 KiB
C
92 lines
2.5 KiB
C
/* Blink Example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <stdio.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "driver/gpio.h"
|
|
#include "esp_log.h"
|
|
#include "led_strip.h"
|
|
#include "sdkconfig.h"
|
|
|
|
static const char *TAG = "example";
|
|
|
|
/* Use project configuration menu (idf.py menuconfig) to choose the GPIO to blink,
|
|
or you can edit the following line and set a number here.
|
|
*/
|
|
#define BLINK_GPIO CONFIG_BLINK_GPIO
|
|
|
|
static uint8_t s_led_state = 0;
|
|
|
|
#ifdef CONFIG_BLINK_LED_RMT
|
|
|
|
static led_strip_handle_t led_strip;
|
|
|
|
static void blink_led(void)
|
|
{
|
|
/* If the addressable LED is enabled */
|
|
if (s_led_state) {
|
|
/* Set the LED pixel using RGB from 0 (0%) to 255 (100%) for each color */
|
|
led_strip_set_pixel(led_strip, 0, 16, 16, 16);
|
|
/* Refresh the strip to send data */
|
|
led_strip_refresh(led_strip);
|
|
} else {
|
|
/* Set all LED off to clear all pixels */
|
|
led_strip_clear(led_strip);
|
|
}
|
|
}
|
|
|
|
static void configure_led(void)
|
|
{
|
|
ESP_LOGI(TAG, "Example configured to blink addressable LED!");
|
|
/* LED strip initialization with the GPIO and pixels number*/
|
|
led_strip_config_t strip_config = {
|
|
.strip_gpio_num = BLINK_GPIO,
|
|
.max_leds = 1, // at least one LED on board
|
|
};
|
|
led_strip_rmt_config_t rmt_config = {
|
|
.resolution_hz = 10 * 1000 * 1000, // 10MHz
|
|
};
|
|
ESP_ERROR_CHECK(led_strip_new_rmt_device(&strip_config, &rmt_config, &led_strip));
|
|
/* Set all LED off to clear all pixels */
|
|
led_strip_clear(led_strip);
|
|
}
|
|
|
|
#elif CONFIG_BLINK_LED_GPIO
|
|
|
|
static void blink_led(void)
|
|
{
|
|
/* Set the GPIO level according to the state (LOW or HIGH)*/
|
|
gpio_set_level(BLINK_GPIO, s_led_state);
|
|
}
|
|
|
|
static void configure_led(void)
|
|
{
|
|
ESP_LOGI(TAG, "Example configured to blink GPIO LED!");
|
|
gpio_reset_pin(BLINK_GPIO);
|
|
/* Set the GPIO as a push/pull output */
|
|
gpio_set_direction(BLINK_GPIO, GPIO_MODE_OUTPUT);
|
|
}
|
|
|
|
#endif
|
|
|
|
void app_main(void)
|
|
{
|
|
|
|
/* Configure the peripheral according to the LED type */
|
|
configure_led();
|
|
|
|
while (1) {
|
|
ESP_LOGI(TAG, "Turning the LED %s!", s_led_state == true ? "ON" : "OFF");
|
|
blink_led();
|
|
/* Toggle the LED state */
|
|
s_led_state = !s_led_state;
|
|
vTaskDelay(CONFIG_BLINK_PERIOD / portTICK_PERIOD_MS);
|
|
}
|
|
}
|