BME280_SensorAPI/bme280.h

/**
 * Copyright (C) 2016 - 2017 Bosch Sensortec GmbH
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * Redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution.
 *
 * Neither the name of the copyright holder nor the names of the
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
 * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
 * OR CONTRIBUTORS BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
 * OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
 *
 * The information provided is believed to be accurate and reliable.
 * The copyright holder assumes no responsibility
 * for the consequences of use
 * of such information nor for any infringement of patents or
 * other rights of third parties which may result from its use.
 * No license is granted by implication or otherwise under any patent or
 * patent rights of the copyright holder.
 *
 * @file	bme280.h
 * @date	21 Mar 2017
 * @version	3.2.0
 * @brief
 *
 */
/*! @file bme280.h
    @brief Sensor driver for BME280 sensor */
/*!
 * @defgroup BME280 SENSOR API
 * @{*/
#ifndef BME280_H_
#define BME280_H_

/*! CPP guard */
#ifdef __cplusplus
extern "C" {
#endif

/* Header includes */
#include "bme280_defs.h"

/*!
 *  @brief This API is the entry point.
 *  It reads the chip-id and calibration data from the sensor.
 *
 *  @param[in,out] dev : Structure instance of bme280_dev
 *
 *  @return Result of API execution status
 *  @retval zero -> Success / +ve value -> Warning / -ve value -> Error
 */
int8_t bme280_init(struct bme280_dev *dev);

/*!
 * @brief This API writes the given data to the register address
 * of the sensor.
 *
 * @param[in] reg_addr : Register address from where the data to be written.
 * @param[in] reg_data : Pointer to data buffer which is to be written
 * in the sensor.
 * @param[in] len : No of bytes of data to write..
 * @param[in] dev : Structure instance of bme280_dev.
 *
 * @return Result of API execution status
 * @retval zero -> Success / +ve value -> Warning / -ve value -> Error
 */
int8_t bme280_set_regs(uint8_t *reg_addr, const uint8_t *reg_data, uint8_t len, const struct bme280_dev *dev);

/*!
 * @brief This API reads the data from the given register address of the sensor.
 *
 * @param[in] reg_addr : Register address from where the data to be read
 * @param[out] reg_data : Pointer to data buffer to store the read data.
 * @param[in] len : No of bytes of data to be read.
 * @param[in] dev : Structure instance of bme280_dev.
 *
 * @return Result of API execution status
 * @retval zero -> Success / +ve value -> Warning / -ve value -> Error
 */
int8_t bme280_get_regs(uint8_t reg_addr, uint8_t *reg_data, uint16_t len, const struct bme280_dev *dev);

/*!
 * @brief This API sets the oversampling, filter and standby duration
 * (normal mode) settings in the sensor.
 *
 * @param[in] dev : Structure instance of bme280_dev.
 * @param[in] desired_settings : Variable used to select the settings which
 * are to be set in the sensor.
 *
 * @note : Below are the macros to be used by the user for selecting the
 * desired settings. User can do OR operation of these macros for configuring
 * multiple settings.
 *
 * Macros		  |   Functionality
 * -----------------------|----------------------------------------------
 * BME280_OSR_PRESS_SEL    |   To set pressure oversampling.
 * BME280_OSR_TEMP_SEL     |   To set temperature oversampling.
 * BME280_OSR_HUM_SEL    |   To set humidity oversampling.
 * BME280_FILTER_SEL     |   To set filter setting.
 * BME280_STANDBY_SEL  |   To set standby duration setting.
 *
 * @return Result of API execution status
 * @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
 */
int8_t bme280_set_sensor_settings(uint8_t desired_settings, const struct bme280_dev *dev);

/*!
 * @brief This API gets the oversampling, filter and standby duration
 * (normal mode) settings from the sensor.
 *
 * @param[in,out] dev : Structure instance of bme280_dev.
 *
 * @return Result of API execution status
 * @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
 */
int8_t bme280_get_sensor_settings(struct bme280_dev *dev);

/*!
 * @brief This API sets the power mode of the sensor.
 *
 * @param[in] dev : Structure instance of bme280_dev.
 * @param[in] sensor_mode : Variable which contains the power mode to be set.
 *
 *    sensor_mode           |   Macros
 * ---------------------|-------------------
 *     0                | BME280_SLEEP_MODE
 *     1                | BME280_FORCED_MODE
 *     3                | BME280_NORMAL_MODE
 *
 * @return Result of API execution status
 * @retval zero -> Success / +ve value -> Warning / -ve value -> Error
 */
int8_t bme280_set_sensor_mode(uint8_t sensor_mode,
				const struct bme280_dev *dev);

/*!
 * @brief This API gets the power mode of the sensor.
 *
 * @param[in] dev : Structure instance of bme280_dev.
 * @param[out] sensor_mode : Pointer variable to store the power mode.
 *
 *   sensor_mode            |   Macros
 * ---------------------|-------------------
 *     0                | BME280_SLEEP_MODE
 *     1                | BME280_FORCED_MODE
 *     3                | BME280_NORMAL_MODE
 *
 * @return Result of API execution status
 * @retval zero -> Success / +ve value -> Warning / -ve value -> Error
 */
int8_t bme280_get_sensor_mode(uint8_t *sensor_mode, const struct bme280_dev *dev);

/*!
 * @brief This API performs the soft reset of the sensor.
 *
 * @param[in] dev : Structure instance of bme280_dev.
 *
 * @return Result of API execution status
 * @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
 */
int8_t bme280_soft_reset(const struct bme280_dev *dev);

/*!
 * @brief This API reads the pressure, temperature and humidity data from the
 * sensor, compensates the data and store it in the bme280_data structure
 * instance passed by the user.
 *
 * @param[in] sensor_comp : Variable which selects which data to be read from
 * the sensor.
 *
 * sensor_comp |   Macros
 * ------------|-------------------
 *     1       | BME280_PRESS
 *     2       | BME280_TEMP
 *     4       | BME280_HUM
 *     7       | BME280_ALL
 *
 * @param[out] comp_data : Structure instance of bme280_data.
 * @param[in] dev : Structure instance of bme280_dev.
 *
 * @return Result of API execution status
 * @retval zero -> Success / +ve value -> Warning / -ve value -> Error
 */
int8_t bme280_get_sensor_data(uint8_t sensor_comp, struct bme280_data *comp_data, struct bme280_dev *dev);

#ifdef __cplusplus
}
#endif /* End of CPP guard */
#endif /* BME280_H_ */
/** @}*/