alex/BME280_SensorAPI
1
0
Fork 0
mirror of https://github.com/boschsensortec/BME280_SensorAPI.git synced 2024-09-18 15:35:59 -04:00
Code Issues Actions Packages Projects Releases Wiki Activity
master
BME280_SensorAPI/bme280_defs.h

495 lines
17 KiB
C
Raw Permalink Blame History

/**
* Copyright (c) 2020 Bosch Sensortec GmbH. All rights reserved.
*
* BSD-3-Clause
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* @file bme280_defs.h
* @date 2020-12-17
* @version v3.5.1
*
*/
#ifndef _BME280_DEFS_H
#define _BME280_DEFS_H
/********************************************************/
/* header includes */
#ifdef __KERNEL__
#include <linux/types.h>
#include <linux/kernel.h>
#else
#include <stdint.h>
#include <stddef.h>
#endif
/********************************************************/
/*! @name Common macros */
/********************************************************/
#if !defined(UINT8_C) && !defined(INT8_C)
#define INT8_C(x) S8_C(x)
#define UINT8_C(x) U8_C(x)
#endif
#if !defined(UINT16_C) && !defined(INT16_C)
#define INT16_C(x) S16_C(x)
#define UINT16_C(x) U16_C(x)
#endif
#if !defined(INT32_C) && !defined(UINT32_C)
#define INT32_C(x) S32_C(x)
#define UINT32_C(x) U32_C(x)
#endif
#if !defined(INT64_C) && !defined(UINT64_C)
#define INT64_C(x) S64_C(x)
#define UINT64_C(x) U64_C(x)
#endif
/**@}*/
/**\name C standard macros */
#ifndef NULL
#ifdef __cplusplus
#define NULL 0
#else
#define NULL ((void *) 0)
#endif
#endif
/******************************************************************************/
/*! @name Compiler switch macros Definitions */
/******************************************************************************/
#ifndef BME280_64BIT_ENABLE /*< Check if 64-bit integer (using BME280_64BIT_ENABLE) is enabled */
#ifndef BME280_32BIT_ENABLE /*< Check if 32-bit integer (using BME280_32BIT_ENABLE) is enabled */
#ifndef BME280_DOUBLE_ENABLE /*< If any of the integer data types not enabled then enable BME280_DOUBLE_ENABLE */
#define BME280_DOUBLE_ENABLE
#endif
#endif
#endif
/******************************************************************************/
/*! @name General Macro Definitions */
/******************************************************************************/
#ifndef TRUE
#define TRUE UINT8_C(1)
#endif
#ifndef FALSE
#define FALSE UINT8_C(0)
#endif
/*!
* BME280_INTF_RET_TYPE is the read/write interface return type which can be overwritten by the build system.
*/
#ifndef BME280_INTF_RET_TYPE
#define BME280_INTF_RET_TYPE int8_t
#endif
/*!
* The last error code from read/write interface is stored in the device structure as intf_rslt.
*/
#ifndef BME280_INTF_RET_SUCCESS
#define BME280_INTF_RET_SUCCESS INT8_C(0)
#endif
/*! @name API success code */
#define BME280_OK INT8_C(0)
/*! @name API error codes */
#define BME280_E_NULL_PTR INT8_C(-1)
#define BME280_E_COMM_FAIL INT8_C(-2)
#define BME280_E_INVALID_LEN INT8_C(-3)
#define BME280_E_DEV_NOT_FOUND INT8_C(-4)
#define BME280_E_SLEEP_MODE_FAIL INT8_C(-5)
#define BME280_E_NVM_COPY_FAILED INT8_C(-6)
/*! @name API warning codes */
#define BME280_W_INVALID_OSR_MACRO INT8_C(1)
/*! @name BME280 chip identifier */
#define BME280_CHIP_ID UINT8_C(0x60)
/*! @name I2C addresses */
#define BME280_I2C_ADDR_PRIM UINT8_C(0x76)
#define BME280_I2C_ADDR_SEC UINT8_C(0x77)
/*! @name Register Address */
#define BME280_REG_CHIP_ID UINT8_C(0xD0)
#define BME280_REG_RESET UINT8_C(0xE0)
#define BME280_REG_TEMP_PRESS_CALIB_DATA UINT8_C(0x88)
#define BME280_REG_HUMIDITY_CALIB_DATA UINT8_C(0xE1)
#define BME280_REG_CTRL_HUM UINT8_C(0xF2)
#define BME280_REG_STATUS UINT8_C(0xF3)
#define BME280_REG_PWR_CTRL UINT8_C(0xF4)
#define BME280_REG_CTRL_MEAS UINT8_C(0xF4)
#define BME280_REG_CONFIG UINT8_C(0xF5)
#define BME280_REG_DATA UINT8_C(0xF7)
/*! @name Macros related to size */
#define BME280_LEN_TEMP_PRESS_CALIB_DATA UINT8_C(26)
#define BME280_LEN_HUMIDITY_CALIB_DATA UINT8_C(7)
#define BME280_LEN_P_T_H_DATA UINT8_C(8)
/*! @name Sensor power modes */
#define BME280_POWERMODE_SLEEP UINT8_C(0x00)
#define BME280_POWERMODE_FORCED UINT8_C(0x01)
#define BME280_POWERMODE_NORMAL UINT8_C(0x03)
#define BME280_SENSOR_MODE_MSK UINT8_C(0x03)
#define BME280_SENSOR_MODE_POS UINT8_C(0x00)
/*! @name Soft reset command */
#define BME280_SOFT_RESET_COMMAND UINT8_C(0xB6)
#define BME280_STATUS_IM_UPDATE UINT8_C(0x01)
#define BME280_STATUS_MEAS_DONE UINT8_C(0x08)
/*! @name Sensor component selection macros
* These values are internal for API implementation. Don't relate this to
* data sheet.
*/
#define BME280_PRESS UINT8_C(1)
#define BME280_TEMP UINT8_C(1 << 1)
#define BME280_HUM UINT8_C(1 << 2)
#define BME280_ALL UINT8_C(0x07)
/*! @name Settings selection macros */
#define BME280_SEL_OSR_PRESS UINT8_C(1)
#define BME280_SEL_OSR_TEMP UINT8_C(1 << 1)
#define BME280_SEL_OSR_HUM UINT8_C(1 << 2)
#define BME280_SEL_FILTER UINT8_C(1 << 3)
#define BME280_SEL_STANDBY UINT8_C(1 << 4)
#define BME280_SEL_ALL_SETTINGS UINT8_C(0x1F)
/*! @name Oversampling macros */
#define BME280_NO_OVERSAMPLING UINT8_C(0x00)
#define BME280_OVERSAMPLING_1X UINT8_C(0x01)
#define BME280_OVERSAMPLING_2X UINT8_C(0x02)
#define BME280_OVERSAMPLING_4X UINT8_C(0x03)
#define BME280_OVERSAMPLING_8X UINT8_C(0x04)
#define BME280_OVERSAMPLING_16X UINT8_C(0x05)
#define BME280_OVERSAMPLING_MAX UINT8_C(16)
#define BME280_CTRL_HUM_MSK UINT8_C(0x07)
#define BME280_CTRL_HUM_POS UINT8_C(0x00)
#define BME280_CTRL_PRESS_MSK UINT8_C(0x1C)
#define BME280_CTRL_PRESS_POS UINT8_C(0x02)
#define BME280_CTRL_TEMP_MSK UINT8_C(0xE0)
#define BME280_CTRL_TEMP_POS UINT8_C(0x05)
/*! @name Measurement delay calculation macros */
#define BME280_MEAS_OFFSET UINT16_C(1250)
#define BME280_MEAS_DUR UINT16_C(2300)
#define BME280_PRES_HUM_MEAS_OFFSET UINT16_C(575)
#define BME280_MEAS_SCALING_FACTOR UINT16_C(1000)
#define BME280_STARTUP_DELAY UINT16_C(2000)
/*! @name Length macros */
#define BME280_MAX_LEN UINT8_C(10)
/*! @name Standby duration selection macros */
#define BME280_STANDBY_TIME_0_5_MS (0x00)
#define BME280_STANDBY_TIME_62_5_MS (0x01)
#define BME280_STANDBY_TIME_125_MS (0x02)
#define BME280_STANDBY_TIME_250_MS (0x03)
#define BME280_STANDBY_TIME_500_MS (0x04)
#define BME280_STANDBY_TIME_1000_MS (0x05)
#define BME280_STANDBY_TIME_10_MS (0x06)
#define BME280_STANDBY_TIME_20_MS (0x07)
#define BME280_STANDBY_MSK UINT8_C(0xE0)
#define BME280_STANDBY_POS UINT8_C(0x05)
/*! @name Bit shift macros */
#define BME280_12_BIT_SHIFT UINT8_C(12)
#define BME280_8_BIT_SHIFT UINT8_C(8)
#define BME280_4_BIT_SHIFT UINT8_C(4)
/*! @name Filter coefficient selection macros */
#define BME280_FILTER_COEFF_OFF (0x00)
#define BME280_FILTER_COEFF_2 (0x01)
#define BME280_FILTER_COEFF_4 (0x02)
#define BME280_FILTER_COEFF_8 (0x03)
#define BME280_FILTER_COEFF_16 (0x04)
#define BME280_FILTER_MSK UINT8_C(0x1C)
#define BME280_FILTER_POS UINT8_C(0x02)
/*! @name Macro to combine two 8 bit data's to form a 16 bit data */
#define BME280_CONCAT_BYTES(msb, lsb) (((uint16_t)msb << 8) | (uint16_t)lsb)
/*! @name Macro to SET and GET BITS of a register */
#define BME280_SET_BITS(reg_data, bitname, data) \
((reg_data & ~(bitname##_MSK)) | \
((data << bitname##_POS) & bitname##_MSK))
#define BME280_SET_BITS_POS_0(reg_data, bitname, data) \
((reg_data & ~(bitname##_MSK)) | \
(data & bitname##_MSK))
#define BME280_GET_BITS(reg_data, bitname) ((reg_data & (bitname##_MSK)) >> \
(bitname##_POS))
#define BME280_GET_BITS_POS_0(reg_data, bitname) (reg_data & (bitname##_MSK))
/********************************************************/
/*!
* @brief Interface selection Enums
*/
enum bme280_intf {
/*! SPI interface */
BME280_SPI_INTF,
/*! I2C interface */
BME280_I2C_INTF
};
/******************************************************************************/
/*! @name Function Pointers */
/******************************************************************************/
/*!
* @brief Bus communication function pointer which should be mapped to
* the platform specific read functions of the user
*
* @param[in] reg_addr : Register address from which data is read.
* @param[out] reg_data : Pointer to data buffer where read data is stored.
* @param[in] len : Number of bytes of data to be read.
* @param[in, out] intf_ptr : Void pointer that can enable the linking of descriptors
* for interface related call backs.
*
* @retval 0 -> Success.
* @retval Non zero value -> Fail.
*
*/
typedef BME280_INTF_RET_TYPE (*bme280_read_fptr_t)(uint8_t reg_addr, uint8_t *reg_data, uint32_t len, void *intf_ptr);
/*!
* @brief Bus communication function pointer which should be mapped to
* the platform specific write functions of the user
*
* @param[in] reg_addr : Register address to which the data is written.
* @param[in] reg_data : Pointer to data buffer in which data to be written
* is stored.
* @param[in] len : Number of bytes of data to be written.
* @param[in, out] intf_ptr : Void pointer that can enable the linking of descriptors
* for interface related call backs
*
* @retval 0 -> Success.
* @retval Non zero value -> Fail.
*
*/
typedef BME280_INTF_RET_TYPE (*bme280_write_fptr_t)(uint8_t reg_addr, const uint8_t *reg_data, uint32_t len,
void *intf_ptr);
/*!
* @brief Delay function pointer which should be mapped to
* delay function of the user
*
* @param[in] period : Delay in microseconds.
* @param[in, out] intf_ptr : Void pointer that can enable the linking of descriptors
* for interface related call backs
*
*/
typedef void (*bme280_delay_us_fptr_t)(uint32_t period, void *intf_ptr);
/******************************************************************************/
/*! @name Structure Declarations */
/******************************************************************************/
/*!
* @brief Calibration data
*/
struct bme280_calib_data
{
/*! Calibration coefficient for the temperature sensor */
uint16_t dig_t1;
/*! Calibration coefficient for the temperature sensor */
int16_t dig_t2;
/*! Calibration coefficient for the temperature sensor */
int16_t dig_t3;
/*! Calibration coefficient for the pressure sensor */
uint16_t dig_p1;
/*! Calibration coefficient for the pressure sensor */
int16_t dig_p2;
/*! Calibration coefficient for the pressure sensor */
int16_t dig_p3;
/*! Calibration coefficient for the pressure sensor */
int16_t dig_p4;
/*! Calibration coefficient for the pressure sensor */
int16_t dig_p5;
/*! Calibration coefficient for the pressure sensor */
int16_t dig_p6;
/*! Calibration coefficient for the pressure sensor */
int16_t dig_p7;
/*! Calibration coefficient for the pressure sensor */
int16_t dig_p8;
/*! Calibration coefficient for the pressure sensor */
int16_t dig_p9;
/*! Calibration coefficient for the humidity sensor */
uint8_t dig_h1;
/*! Calibration coefficient for the humidity sensor */
int16_t dig_h2;
/*! Calibration coefficient for the humidity sensor */
uint8_t dig_h3;
/*! Calibration coefficient for the humidity sensor */
int16_t dig_h4;
/*! Calibration coefficient for the humidity sensor */
int16_t dig_h5;
/*! Calibration coefficient for the humidity sensor */
int8_t dig_h6;
/*! Variable to store the intermediate temperature coefficient */
int32_t t_fine;
};
/*!
* @brief bme280 sensor structure which comprises of temperature, pressure and
* humidity data
*/
#ifdef BME280_DOUBLE_ENABLE
struct bme280_data
{
/*! Compensated pressure */
double pressure;
/*! Compensated temperature */
double temperature;
/*! Compensated humidity */
double humidity;
};
#else
struct bme280_data
{
/*! Compensated pressure */
uint32_t pressure;
/*! Compensated temperature */
int32_t temperature;
/*! Compensated humidity */
uint32_t humidity;
};
#endif /*! BME280_USE_FLOATING_POINT */
/*!
* @brief bme280 sensor structure which comprises of uncompensated temperature,
* pressure and humidity data
*/
struct bme280_uncomp_data
{
/*! Un-compensated pressure */
uint32_t pressure;
/*! Un-compensated temperature */
uint32_t temperature;
/*! Un-compensated humidity */
uint32_t humidity;
};
/*!
* @brief bme280 sensor settings structure which comprises of mode,
* oversampling and filter settings.
*/
struct bme280_settings
{
/*! Pressure oversampling */
uint8_t osr_p;
/*! Temperature oversampling */
uint8_t osr_t;
/*! Humidity oversampling */
uint8_t osr_h;
/*! Filter coefficient */
uint8_t filter;
/*! Standby time */
uint8_t standby_time;
};
/*!
* @brief bme280 device structure
*/
struct bme280_dev
{
/*! Chip Id */
uint8_t chip_id;
/*! Interface Selection
* For SPI, intf = BME280_SPI_INTF
* For I2C, intf = BME280_I2C_INTF
*/
enum bme280_intf intf;
/*!
* The interface pointer is used to enable the user
* to link their interface descriptors for reference during the
* implementation of the read and write interfaces to the
* hardware.
*/
void *intf_ptr;
/*! Variable to store result of read/write function */
BME280_INTF_RET_TYPE intf_rslt;
/*! Read function pointer */
bme280_read_fptr_t read;
/*! Write function pointer */
bme280_write_fptr_t write;
/*! Delay function pointer */
bme280_delay_us_fptr_t delay_us;
/*! Trim data */
struct bme280_calib_data calib_data;
};
#endif /* _BME280_DEFS_H */
Reference in New Issue View Git Blame Copy Permalink