alex/Adafruit-GFX-Library
1
0
Fork 0
mirror of https://github.com/adafruit/Adafruit-GFX-Library.git synced 2024-10-03 18:18:46 -04:00
Code Issues Actions Packages Projects Releases Wiki Activity
a2a0335f90
Adafruit-GFX-Library/Adafruit_SPITFT.cpp

2126 lines
88 KiB
C++
Raw Blame History

/*!
* @file Adafruit_SPITFT.cpp
*
* @mainpage Adafruit SPI TFT Displays (and some others)
*
* @section intro_sec Introduction
*
* Part of Adafruit's GFX graphics library. Originally this class was
* written to handle a range of color TFT displays connected via SPI,
* but over time this library and some display-specific subclasses have
* mutated to include some color OLEDs as well as parallel-interfaced
* displays. The name's been kept for the sake of older code.
*
* Adafruit invests time and resources providing this open source code,
* please support Adafruit and open-source hardware by purchasing
* products from Adafruit!
* @section dependencies Dependencies
*
* This library depends on <a href="https://github.com/adafruit/Adafruit_GFX">
* Adafruit_GFX</a> being present on your system. Please make sure you have
* installed the latest version before using this library.
*
* @section author Author
*
* Written by Limor "ladyada" Fried for Adafruit Industries,
* with contributions from the open source community.
*
* @section license License
*
* BSD license, all text here must be included in any redistribution.
*/
#if !defined(__AVR_ATtiny85__) // Not for ATtiny, at all
#include "Adafruit_SPITFT.h"
#if defined(PORT_IOBUS)
// On SAMD21, redefine digitalPinToPort() to use the slightly-faster
// PORT_IOBUS rather than PORT (not needed on SAMD51).
#undef digitalPinToPort
#define digitalPinToPort(P) (&(PORT_IOBUS->Group[g_APinDescription[P].ulPort]))
#endif // end PORT_IOBUS
#if defined(USE_SPI_DMA)
#include <Adafruit_ZeroDMA.h>
#include "wiring_private.h" // pinPeripheral() function
#include <malloc.h> // memalign() function
#define tcNum 2 // Timer/Counter for parallel write strobe PWM
#define wrPeripheral PIO_CCL // Use CCL to invert write strobe
// DMA transfer-in-progress indicator and callback
static volatile bool dma_busy = false;
static void dma_callback(Adafruit_ZeroDMA *dma) {
dma_busy = false;
}
#if defined(__SAMD51__)
// Timer/counter info by index #
static const struct {
Tc *tc; // -> Timer/Counter base address
int gclk; // GCLK ID
int evu; // EVSYS user ID
} tcList[] = {
{ TC0, TC0_GCLK_ID, EVSYS_ID_USER_TC0_EVU },
{ TC1, TC1_GCLK_ID, EVSYS_ID_USER_TC1_EVU },
{ TC2, TC2_GCLK_ID, EVSYS_ID_USER_TC2_EVU },
{ TC3, TC3_GCLK_ID, EVSYS_ID_USER_TC3_EVU },
#if defined(TC4)
{ TC4, TC4_GCLK_ID, EVSYS_ID_USER_TC4_EVU },
#endif
#if defined(TC5)
{ TC5, TC5_GCLK_ID, EVSYS_ID_USER_TC5_EVU },
#endif
#if defined(TC6)
{ TC6, TC6_GCLK_ID, EVSYS_ID_USER_TC6_EVU },
#endif
#if defined(TC7)
{ TC7, TC7_GCLK_ID, EVSYS_ID_USER_TC7_EVU }
#endif
};
#define NUM_TIMERS (sizeof tcList / sizeof tcList[0]) ///< # timer/counters
#endif // end __SAMD51__
#endif // end USE_SPI_DMA
// Possible values for Adafruit_SPITFT.connection:
#define TFT_HARD_SPI 0 ///< Display interface = hardware SPI
#define TFT_SOFT_SPI 1 ///< Display interface = software SPI
#define TFT_PARALLEL 2 ///< Display interface = 8- or 16-bit parallel
// CONSTRUCTORS ------------------------------------------------------------
/*!
@brief Adafruit_SPITFT constructor for software (bitbang) SPI.
@param w Display width in pixels at default rotation setting (0).
@param h Display height in pixels at default rotation setting (0).
@param cs Arduino pin # for chip-select (-1 if unused, tie CS low).
@param dc Arduino pin # for data/command select (required).
@param mosi Arduino pin # for bitbang SPI MOSI signal (required).
@param sck Arduino pin # for bitbang SPI SCK signal (required).
@param rst Arduino pin # for display reset (optional, display reset
can be tied to MCU reset, default of -1 means unused).
@param miso Arduino pin # for bitbang SPI MISO signal (optional,
-1 default, many displays don't support SPI read).
@return Adafruit_SPITFT object.
@note Output pins are not initialized; application typically will
need to call subclass' begin() function, which in turn calls
this library's initSPI() function to initialize pins.
*/
Adafruit_SPITFT::Adafruit_SPITFT(uint16_t w, uint16_t h,
int8_t cs, int8_t dc, int8_t mosi, int8_t sck, int8_t rst, int8_t miso) :
Adafruit_GFX(w, h), connection(TFT_SOFT_SPI), _rst(rst), _cs(cs), _dc(dc) {
swspi._sck = sck;
swspi._mosi = mosi;
swspi._miso = miso;
#if defined(USE_FAST_PINIO)
#if defined(HAS_PORT_SET_CLR)
#if defined(CORE_TEENSY)
#if !defined(KINETISK)
dcPinMask = digitalPinToBitMask(dc);
#endif
dcPortSet = portSetRegister(dc);
dcPortClr = portClearRegister(dc);
swspi.sckPortSet = portSetRegister(sck);
swspi.sckPortClr = portClearRegister(sck);
swspi.mosiPortSet = portSetRegister(mosi);
swspi.mosiPortClr = portClearRegister(mosi);
if(cs >= 0) {
#if !defined(KINETISK)
csPinMask = digitalPinToBitMask(cs);
#endif
csPortSet = portSetRegister(cs);
csPortClr = portClearRegister(cs);
} else {
#if !defined(KINETISK)
csPinMask = 0;
#endif
csPortSet = dcPortSet;
csPortClr = dcPortClr;
}
if(miso >= 0) {
swspi.misoPort = portInputRegister(miso);
} else {
swspi.misoPort = portInputRegister(dc);
}
#else // !CORE_TEENSY
dcPinMask =digitalPinToBitMask(dc);
swspi.sckPinMask =digitalPinToBitMask(sck);
swspi.mosiPinMask=digitalPinToBitMask(mosi);
dcPortSet =&(PORT->Group[g_APinDescription[dc].ulPort].OUTSET.reg);
dcPortClr =&(PORT->Group[g_APinDescription[dc].ulPort].OUTCLR.reg);
swspi.sckPortSet =&(PORT->Group[g_APinDescription[sck].ulPort].OUTSET.reg);
swspi.sckPortClr =&(PORT->Group[g_APinDescription[sck].ulPort].OUTCLR.reg);
swspi.mosiPortSet=&(PORT->Group[g_APinDescription[mosi].ulPort].OUTSET.reg);
swspi.mosiPortClr=&(PORT->Group[g_APinDescription[mosi].ulPort].OUTCLR.reg);
if(cs >= 0) {
csPinMask = digitalPinToBitMask(cs);
csPortSet = &(PORT->Group[g_APinDescription[cs].ulPort].OUTSET.reg);
csPortClr = &(PORT->Group[g_APinDescription[cs].ulPort].OUTCLR.reg);
} else {
// No chip-select line defined; might be permanently tied to GND.
// Assign a valid GPIO register (though not used for CS), and an
// empty pin bitmask...the nonsense bit-twiddling might be faster
// than checking _cs and possibly branching.
csPortSet = dcPortSet;
csPortClr = dcPortClr;
csPinMask = 0;
}
if(miso >= 0) {
swspi.misoPinMask=digitalPinToBitMask(miso);
swspi.misoPort =(PORTreg_t)portInputRegister(digitalPinToPort(miso));
} else {
swspi.misoPinMask=0;
swspi.misoPort =(PORTreg_t)portInputRegister(digitalPinToPort(dc));
}
#endif // end !CORE_TEENSY
#else // !HAS_PORT_SET_CLR
dcPort =(PORTreg_t)portOutputRegister(digitalPinToPort(dc));
dcPinMaskSet =digitalPinToBitMask(dc);
swspi.sckPort =(PORTreg_t)portOutputRegister(digitalPinToPort(sck));
swspi.sckPinMaskSet =digitalPinToBitMask(sck);
swspi.mosiPort =(PORTreg_t)portOutputRegister(digitalPinToPort(mosi));
swspi.mosiPinMaskSet=digitalPinToBitMask(mosi);
if(cs >= 0) {
csPort = (PORTreg_t)portOutputRegister(digitalPinToPort(cs));
csPinMaskSet = digitalPinToBitMask(cs);
} else {
// No chip-select line defined; might be permanently tied to GND.
// Assign a valid GPIO register (though not used for CS), and an
// empty pin bitmask...the nonsense bit-twiddling might be faster
// than checking _cs and possibly branching.
csPort = dcPort;
csPinMaskSet = 0;
}
if(miso >= 0) {
swspi.misoPort =(PORTreg_t)portInputRegister(digitalPinToPort(miso));
swspi.misoPinMask=digitalPinToBitMask(miso);
} else {
swspi.misoPort =(PORTreg_t)portInputRegister(digitalPinToPort(dc));
swspi.misoPinMask=0;
}
csPinMaskClr = ~csPinMaskSet;
dcPinMaskClr = ~dcPinMaskSet;
swspi.sckPinMaskClr = ~swspi.sckPinMaskSet;
swspi.mosiPinMaskClr = ~swspi.mosiPinMaskSet;
#endif // !end HAS_PORT_SET_CLR
#endif // end USE_FAST_PINIO
}
/*!
@brief Adafruit_SPITFT constructor for hardware SPI using the board's
default SPI peripheral.
@param w Display width in pixels at default rotation setting (0).
@param h Display height in pixels at default rotation setting (0).
@param cs Arduino pin # for chip-select (-1 if unused, tie CS low).
@param dc Arduino pin # for data/command select (required).
@param rst Arduino pin # for display reset (optional, display reset
can be tied to MCU reset, default of -1 means unused).
@return Adafruit_SPITFT object.
@note Output pins are not initialized; application typically will
need to call subclass' begin() function, which in turn calls
this library's initSPI() function to initialize pins.
*/
#if defined(ESP8266) // See notes below
Adafruit_SPITFT::Adafruit_SPITFT(uint16_t w, uint16_t h, int8_t cs,
int8_t dc, int8_t rst) : Adafruit_GFX(w, h),
connection(TFT_HARD_SPI), _rst(rst), _cs(cs), _dc(dc) {
hwspi._spi = &SPI;
}
#else // !ESP8266
Adafruit_SPITFT::Adafruit_SPITFT(uint16_t w, uint16_t h, int8_t cs,
int8_t dc, int8_t rst) : Adafruit_SPITFT(w, h, &SPI, cs, dc, rst) {
// This just invokes the hardware SPI constructor below,
// passing the default SPI device (&SPI).
}
#endif // end !ESP8266
#if !defined(ESP8266)
// ESP8266 compiler freaks out at this constructor -- it can't disambiguate
// beteween the SPIClass pointer (argument #3) and a regular integer.
// Solution here it to just not offer this variant on the ESP8266. You can
// use the default hardware SPI peripheral, or you can use software SPI,
// but if there's any library out there that creates a 'virtual' SPIClass
// peripheral and drives it with software bitbanging, that's not supported.
/*!
@brief Adafruit_SPITFT constructor for hardware SPI using a specific
SPI peripheral.
@param w Display width in pixels at default rotation (0).
@param h Display height in pixels at default rotation (0).
@param spiClass Pointer to SPIClass type (e.g. &SPI or &SPI1).
@param cs Arduino pin # for chip-select (-1 if unused, tie CS low).
@param dc Arduino pin # for data/command select (required).
@param rst Arduino pin # for display reset (optional, display reset
can be tied to MCU reset, default of -1 means unused).
@return Adafruit_SPITFT object.
@note Output pins are not initialized; application typically will
need to call subclass' begin() function, which in turn calls
this library's initSPI() function to initialize pins.
*/
Adafruit_SPITFT::Adafruit_SPITFT(uint16_t w, uint16_t h, SPIClass *spiClass,
int8_t cs, int8_t dc, int8_t rst) : Adafruit_GFX(w, h),
connection(TFT_HARD_SPI), _rst(rst), _cs(cs), _dc(dc) {
hwspi._spi = spiClass;
#if defined(USE_FAST_PINIO)
#if defined(HAS_PORT_SET_CLR)
#if defined(CORE_TEENSY)
#if !defined(KINETISK)
dcPinMask = digitalPinToBitMask(dc);
#endif
dcPortSet = portSetRegister(dc);
dcPortClr = portClearRegister(dc);
if(cs >= 0) {
#if !defined(KINETISK)
csPinMask = digitalPinToBitMask(cs);
#endif
csPortSet = portSetRegister(cs);
csPortClr = portClearRegister(cs);
} else { // see comments below
#if !defined(KINETISK)
csPinMask = 0;
#endif
csPortSet = dcPortSet;
csPortClr = dcPortClr;
}
#else // !CORE_TEENSY
dcPinMask = digitalPinToBitMask(dc);
dcPortSet = &(PORT->Group[g_APinDescription[dc].ulPort].OUTSET.reg);
dcPortClr = &(PORT->Group[g_APinDescription[dc].ulPort].OUTCLR.reg);
if(cs >= 0) {
csPinMask = digitalPinToBitMask(cs);
csPortSet = &(PORT->Group[g_APinDescription[cs].ulPort].OUTSET.reg);
csPortClr = &(PORT->Group[g_APinDescription[cs].ulPort].OUTCLR.reg);
} else {
// No chip-select line defined; might be permanently tied to GND.
// Assign a valid GPIO register (though not used for CS), and an
// empty pin bitmask...the nonsense bit-twiddling might be faster
// than checking _cs and possibly branching.
csPortSet = dcPortSet;
csPortClr = dcPortClr;
csPinMask = 0;
}
#endif // end !CORE_TEENSY
#else // !HAS_PORT_SET_CLR
dcPort = (PORTreg_t)portOutputRegister(digitalPinToPort(dc));
dcPinMaskSet = digitalPinToBitMask(dc);
if(cs >= 0) {
csPort = (PORTreg_t)portOutputRegister(digitalPinToPort(cs));
csPinMaskSet = digitalPinToBitMask(cs);
} else {
// No chip-select line defined; might be permanently tied to GND.
// Assign a valid GPIO register (though not used for CS), and an
// empty pin bitmask...the nonsense bit-twiddling might be faster
// than checking _cs and possibly branching.
csPort = dcPort;
csPinMaskSet = 0;
}
csPinMaskClr = ~csPinMaskSet;
dcPinMaskClr = ~dcPinMaskSet;
#endif // end !HAS_PORT_SET_CLR
#endif // end USE_FAST_PINIO
}
#endif // end !ESP8266
/*!
@brief Adafruit_SPITFT constructor for parallel display connection.
@param w Display width in pixels at default rotation (0).
@param h Display height in pixels at default rotation (0).
@param busWidth If tft16 (enumeration in header file), is a 16-bit
parallel connection, else 8-bit.
16-bit isn't fully implemented or tested yet so
applications should pass "tft8bitbus" for now...needed to
stick a required enum argument in there to
disambiguate this constructor from the soft-SPI case.
Argument is ignored on 8-bit architectures (no 'wide'
support there since PORTs are 8 bits anyway).
@param d0 Arduino pin # for data bit 0 (1+ are extrapolated).
The 8 (or 16) data bits MUST be contiguous and byte-
aligned (or word-aligned for wide interface) within
the same PORT register (might not correspond to
Arduino pin sequence).
@param wr Arduino pin # for write strobe (required).
@param dc Arduino pin # for data/command select (required).
@param cs Arduino pin # for chip-select (optional, -1 if unused,
tie CS low).
@param rst Arduino pin # for display reset (optional, display reset
can be tied to MCU reset, default of -1 means unused).
@param rd Arduino pin # for read strobe (optional, -1 if unused).
@return Adafruit_SPITFT object.
@note Output pins are not initialized; application typically will need
to call subclass' begin() function, which in turn calls this
library's initSPI() function to initialize pins.
Yes, the name is a misnomer...this library originally handled
only SPI displays, parallel being a recent addition (but not
wanting to break existing code).
*/
Adafruit_SPITFT::Adafruit_SPITFT(uint16_t w, uint16_t h, tftBusWidth busWidth,
int8_t d0, int8_t wr, int8_t dc, int8_t cs, int8_t rst, int8_t rd) :
Adafruit_GFX(w, h), connection(TFT_PARALLEL), _rst(rst), _cs(cs), _dc(dc) {
tft8._d0 = d0;
tft8._wr = wr;
tft8._rd = rd;
tft8.wide = (busWidth == tft16bitbus);
#if defined(USE_FAST_PINIO)
#if defined(HAS_PORT_SET_CLR)
#if defined(CORE_TEENSY)
tft8.wrPortSet = portSetRegister(wr);
tft8.wrPortClr = portClearRegister(wr);
#if !defined(KINETISK)
dcPinMask = digitalPinToBitMask(dc);
#endif
dcPortSet = portSetRegister(dc);
dcPortClr = portClearRegister(dc);
if(cs >= 0) {
#if !defined(KINETISK)
csPinMask = digitalPinToBitMask(cs);
#endif
csPortSet = portSetRegister(cs);
csPortClr = portClearRegister(cs);
} else { // see comments below
#if !defined(KINETISK)
csPinMask = 0;
#endif
csPortSet = dcPortSet;
csPortClr = dcPortClr;
}
if(rd >= 0) { // if read-strobe pin specified...
#if defined(KINETISK)
tft8.rdPinMask = 1;
#else // !KINETISK
tft8.rdPinMask = digitalPinToBitMask(rd);
#endif
tft8.rdPortSet = portSetRegister(rd);
tft8.rdPortClr = portClearRegister(rd);
} else {
tft8.rdPinMask = 0;
tft8.rdPortSet = dcPortSet;
tft8.rdPortClr = dcPortClr;
}
// These are all uint8_t* pointers -- elsewhere they're recast
// as necessary if a 'wide' 16-bit interface is in use.
tft8.writePort = portOutputRegister(d0);
tft8.readPort = portInputRegister(d0);
tft8.dirSet = portModeRegister(d0);
tft8.dirClr = portModeRegister(d0);
#else // !CORE_TEENSY
tft8.wrPinMask = digitalPinToBitMask(wr);
tft8.wrPortSet = &(PORT->Group[g_APinDescription[wr].ulPort].OUTSET.reg);
tft8.wrPortClr = &(PORT->Group[g_APinDescription[wr].ulPort].OUTCLR.reg);
dcPinMask = digitalPinToBitMask(dc);
dcPortSet = &(PORT->Group[g_APinDescription[dc].ulPort].OUTSET.reg);
dcPortClr = &(PORT->Group[g_APinDescription[dc].ulPort].OUTCLR.reg);
if(cs >= 0) {
csPinMask = digitalPinToBitMask(cs);
csPortSet = &(PORT->Group[g_APinDescription[cs].ulPort].OUTSET.reg);
csPortClr = &(PORT->Group[g_APinDescription[cs].ulPort].OUTCLR.reg);
} else {
// No chip-select line defined; might be permanently tied to GND.
// Assign a valid GPIO register (though not used for CS), and an
// empty pin bitmask...the nonsense bit-twiddling might be faster
// than checking _cs and possibly branching.
csPortSet = dcPortSet;
csPortClr = dcPortClr;
csPinMask = 0;
}
if(rd >= 0) { // if read-strobe pin specified...
tft8.rdPinMask =digitalPinToBitMask(rd);
tft8.rdPortSet =&(PORT->Group[g_APinDescription[rd].ulPort].OUTSET.reg);
tft8.rdPortClr =&(PORT->Group[g_APinDescription[rd].ulPort].OUTCLR.reg);
} else {
tft8.rdPinMask = 0;
tft8.rdPortSet = dcPortSet;
tft8.rdPortClr = dcPortClr;
}
// Get pointers to PORT write/read/dir bytes within 32-bit PORT
uint8_t dBit = g_APinDescription[d0].ulPin; // d0 bit # in PORT
PortGroup *p = (&(PORT->Group[g_APinDescription[d0].ulPort]));
uint8_t offset = dBit / 8; // d[7:0] byte # within PORT
if(tft8.wide) offset &= ~1; // d[15:8] byte # within PORT
// These are all uint8_t* pointers -- elsewhere they're recast
// as necessary if a 'wide' 16-bit interface is in use.
tft8.writePort = (volatile uint8_t *)&(p->OUT.reg) + offset;
tft8.readPort = (volatile uint8_t *)&(p->IN.reg) + offset;
tft8.dirSet = (volatile uint8_t *)&(p->DIRSET.reg) + offset;
tft8.dirClr = (volatile uint8_t *)&(p->DIRCLR.reg) + offset;
#endif // end !CORE_TEENSY
#else // !HAS_PORT_SET_CLR
tft8.wrPort = (PORTreg_t)portOutputRegister(digitalPinToPort(wr));
tft8.wrPinMaskSet = digitalPinToBitMask(wr);
dcPort = (PORTreg_t)portOutputRegister(digitalPinToPort(dc));
dcPinMaskSet = digitalPinToBitMask(dc);
if(cs >= 0) {
csPort = (PORTreg_t)portOutputRegister(digitalPinToPort(cs));
csPinMaskSet = digitalPinToBitMask(cs);
} else {
// No chip-select line defined; might be permanently tied to GND.
// Assign a valid GPIO register (though not used for CS), and an
// empty pin bitmask...the nonsense bit-twiddling might be faster
// than checking _cs and possibly branching.
csPort = dcPort;
csPinMaskSet = 0;
}
if(rd >= 0) { // if read-strobe pin specified...
tft8.rdPort =(PORTreg_t)portOutputRegister(digitalPinToPort(rd));
tft8.rdPinMaskSet =digitalPinToBitMask(rd);
} else {
tft8.rdPort = dcPort;
tft8.rdPinMaskSet = 0;
}
csPinMaskClr = ~csPinMaskSet;
dcPinMaskClr = ~dcPinMaskSet;
tft8.wrPinMaskClr = ~tft8.wrPinMaskSet;
tft8.rdPinMaskClr = ~tft8.rdPinMaskSet;
tft8.writePort = (PORTreg_t)portOutputRegister(digitalPinToPort(d0));
tft8.readPort = (PORTreg_t)portInputRegister(digitalPinToPort(d0));
tft8.portDir = (PORTreg_t)portModeRegister(digitalPinToPort(d0));
#endif // end !HAS_PORT_SET_CLR
#endif // end USE_FAST_PINIO
}
// end constructors -------
// CLASS MEMBER FUNCTIONS --------------------------------------------------
// begin() and setAddrWindow() MUST be declared by any subclass.
/*!
@brief Configure microcontroller pins for TFT interfacing. Typically
called by a subclass' begin() function.
@param freq SPI frequency when using hardware SPI. If default (0)
is passed, will fall back on a device-specific value.
Value is ignored when using software SPI or parallel
connection.
@note Another anachronistically-named function; this is called even
when the display connection is parallel (not SPI). Also, this
could probably be made private...quite a few class functions
were generously put in the public section.
*/
void Adafruit_SPITFT::initSPI(uint32_t freq) {
if(!freq) freq = DEFAULT_SPI_FREQ; // If no freq specified, use default
// Init basic control pins common to all connection types
if(_cs >= 0) {
pinMode(_cs, OUTPUT);
digitalWrite(_cs, HIGH); // Deselect
}
pinMode(_dc, OUTPUT);
digitalWrite(_dc, HIGH); // Data mode
if(connection == TFT_HARD_SPI) {
#if defined(SPI_HAS_TRANSACTION)
hwspi.settings = SPISettings(freq, MSBFIRST, SPI_MODE0);
#else
hwspi._freq = freq; // Save freq value for later
#endif
hwspi._spi->begin();
} else if(connection == TFT_SOFT_SPI) {
pinMode(swspi._mosi, OUTPUT);
digitalWrite(swspi._mosi, LOW);
pinMode(swspi._sck, OUTPUT);
digitalWrite(swspi._sck, LOW);
if(swspi._miso >= 0) {
pinMode(swspi._miso, INPUT);
}
} else { // TFT_PARALLEL
// Initialize data pins. We were only passed d0, so scan
// the pin description list looking for the other pins.
// They'll be on the same PORT, and within the next 7 (or 15) bits
// (because we need to write to a contiguous PORT byte or word).
#if defined(__AVR__)
// PORT registers are 8 bits wide, so just need a register match...
for(uint8_t i=0; i<NUM_DIGITAL_PINS; i++) {
if((PORTreg_t)portOutputRegister(digitalPinToPort(i)) ==
tft8.writePort) {
pinMode(i, OUTPUT);
digitalWrite(i, LOW);
}
}
#elif defined(USE_FAST_PINIO)
#if defined(CORE_TEENSY)
if(!tft8.wide) {
*tft8.dirSet = 0xFF; // Set port to output
*tft8.writePort = 0x00; // Write all 0s
} else {
*(volatile uint16_t *)tft8.dirSet = 0xFFFF;
*(volatile uint16_t *)tft8.writePort = 0x0000;
}
#else // !CORE_TEENSY
uint8_t portNum = g_APinDescription[tft8._d0].ulPort, // d0 PORT #
dBit = g_APinDescription[tft8._d0].ulPin, // d0 bit in PORT
lastBit = dBit + (tft8.wide ? 15 : 7);
for(uint8_t i=0; i<PINS_COUNT; i++) {
if((g_APinDescription[i].ulPort == portNum ) &&
(g_APinDescription[i].ulPin >= dBit ) &&
(g_APinDescription[i].ulPin <= (uint32_t)lastBit)) {
pinMode(i, OUTPUT);
digitalWrite(i, LOW);
}
}
#endif // end !CORE_TEENSY
#endif
pinMode(tft8._wr, OUTPUT);
digitalWrite(tft8._wr, HIGH);
if(tft8._rd >= 0) {
pinMode(tft8._rd, OUTPUT);
digitalWrite(tft8._rd, HIGH);
}
}
if(_rst >= 0) {
// Toggle _rst low to reset
pinMode(_rst, OUTPUT);
digitalWrite(_rst, HIGH);
delay(100);
digitalWrite(_rst, LOW);
delay(100);
digitalWrite(_rst, HIGH);
delay(200);
}
#if defined(USE_SPI_DMA)
if(((connection == TFT_HARD_SPI) || (connection == TFT_PARALLEL)) &&
(dma.allocate() == DMA_STATUS_OK)) { // Allocate channel
// The DMA library needs to alloc at least one valid descriptor,
// so we do that here. It's not used in the usual sense though,
// just before a transfer we copy descriptor[0] to this address.
if(dptr = dma.addDescriptor(NULL, NULL, 42, DMA_BEAT_SIZE_BYTE,
false, false)) {
// Alloc 2 scanlines worth of pixels on display's major axis,
// whichever that is, rounding each up to 2-pixel boundary.
int major = (WIDTH > HEIGHT) ? WIDTH : HEIGHT;
major += (major & 1); // -> next 2-pixel bound, if needed.
maxFillLen = major * 2; // 2 scanlines
// Note to future self: if you decide to make the pixel buffer
// much larger, remember that DMA transfer descriptors can't
// exceed 65,535 bytes (not 65,536), meaning 32,767 pixels max.
// Not that we have that kind of RAM to throw around right now.
if((pixelBuf[0] =
(uint16_t *)malloc(maxFillLen * sizeof(uint16_t)))) {
// Alloc OK. Get pointer to start of second scanline.
pixelBuf[1] = &pixelBuf[0][major];
// Determine number of DMA descriptors needed to cover
// entire screen when entire 2-line pixelBuf is used
// (round up for fractional last descriptor).
int numDescriptors = (WIDTH * HEIGHT + (maxFillLen - 1)) /
maxFillLen;
// DMA descriptors MUST be 128-bit (16 byte) aligned.
// memalign() is considered obsolete but it's replacements
// (aligned_alloc() or posix_memalign()) are not currently
// available in the version of ARM GCC in use, but this
// is, so here we are.
if((descriptor = (DmacDescriptor *)memalign(16,
numDescriptors * sizeof(DmacDescriptor)))) {
int dmac_id;
volatile uint32_t *data_reg;
if(connection == TFT_HARD_SPI) {
// THIS IS AN AFFRONT TO NATURE, but I don't know
// any "clean" way to get the sercom number from the
// the SPIClass pointer (e.g. &SPI or &SPI1), which
// is all we have to work with. SPIClass does contain
// a SERCOM pointer but it is a PRIVATE member!
// Doing an UNSPEAKABLY HORRIBLE THING here, directly
// accessing the first 32-bit value in the SPIClass
// structure, knowing that's (currently) where the
// SERCOM pointer lives, but this ENTIRELY DEPENDS on
// that structure not changing nor the compiler
// rearranging things. Oh the humanity!
if(*(SERCOM **)hwspi._spi == &sercom0) {
dmac_id = SERCOM0_DMAC_ID_TX;
data_reg = &SERCOM0->SPI.DATA.reg;
#if defined SERCOM1
} else if(*(SERCOM **)hwspi._spi == &sercom1) {
dmac_id = SERCOM1_DMAC_ID_TX;
data_reg = &SERCOM1->SPI.DATA.reg;
#endif
#if defined SERCOM2
} else if(*(SERCOM **)hwspi._spi == &sercom2) {
dmac_id = SERCOM2_DMAC_ID_TX;
data_reg = &SERCOM2->SPI.DATA.reg;
#endif
#if defined SERCOM3
} else if(*(SERCOM **)hwspi._spi == &sercom3) {
dmac_id = SERCOM3_DMAC_ID_TX;
data_reg = &SERCOM3->SPI.DATA.reg;
#endif
#if defined SERCOM4
} else if(*(SERCOM **)hwspi._spi == &sercom4) {
dmac_id = SERCOM4_DMAC_ID_TX;
data_reg = &SERCOM4->SPI.DATA.reg;
#endif
#if defined SERCOM5
} else if(*(SERCOM **)hwspi._spi == &sercom5) {
dmac_id = SERCOM5_DMAC_ID_TX;
data_reg = &SERCOM5->SPI.DATA.reg;
#endif
#if defined SERCOM6
} else if(*(SERCOM **)hwspi._spi == &sercom6) {
dmac_id = SERCOM6_DMAC_ID_TX;
data_reg = &SERCOM6->SPI.DATA.reg;
#endif
#if defined SERCOM7
} else if(*(SERCOM **)hwspi._spi == &sercom7) {
dmac_id = SERCOM7_DMAC_ID_TX;
data_reg = &SERCOM7->SPI.DATA.reg;
#endif
}
dma.setPriority(DMA_PRIORITY_3);
dma.setTrigger(dmac_id);
dma.setAction(DMA_TRIGGER_ACTON_BEAT);
// Initialize descriptor list.
for(int d=0; d<numDescriptors; d++) {
// No need to set SRCADDR, DESCADDR or BTCNT --
// those are done in the pixel-writing functions.
descriptor[d].BTCTRL.bit.VALID = true;
descriptor[d].BTCTRL.bit.EVOSEL =
DMA_EVENT_OUTPUT_DISABLE;
descriptor[d].BTCTRL.bit.BLOCKACT =
DMA_BLOCK_ACTION_NOACT;
descriptor[d].BTCTRL.bit.BEATSIZE =
DMA_BEAT_SIZE_BYTE;
descriptor[d].BTCTRL.bit.DSTINC = 0;
descriptor[d].BTCTRL.bit.STEPSEL =
DMA_STEPSEL_SRC;
descriptor[d].BTCTRL.bit.STEPSIZE =
DMA_ADDRESS_INCREMENT_STEP_SIZE_1;
descriptor[d].DSTADDR.reg =
(uint32_t)data_reg;
}
} else { // Parallel connection
#if defined(__SAMD51__)
int dmaChannel = dma.getChannel();
// Enable event output, use EVOSEL output
DMAC->Channel[dmaChannel].CHEVCTRL.bit.EVOE = 1;
DMAC->Channel[dmaChannel].CHEVCTRL.bit.EVOMODE = 0;
// CONFIGURE TIMER/COUNTER (for write strobe)
Tc *timer = tcList[tcNum].tc; // -> Timer struct
int id = tcList[tcNum].gclk; // Timer GCLK ID
GCLK_PCHCTRL_Type pchctrl;
// Set up timer clock source from GCLK
GCLK->PCHCTRL[id].bit.CHEN = 0; // Stop timer
while(GCLK->PCHCTRL[id].bit.CHEN); // Wait for it
pchctrl.bit.GEN = GCLK_PCHCTRL_GEN_GCLK0_Val;
pchctrl.bit.CHEN = 1; // Enable
GCLK->PCHCTRL[id].reg = pchctrl.reg;
while(!GCLK->PCHCTRL[id].bit.CHEN); // Wait for it
// Disable timer/counter before configuring it
timer->COUNT8.CTRLA.bit.ENABLE = 0;
while(timer->COUNT8.SYNCBUSY.bit.STATUS);
timer->COUNT8.WAVE.bit.WAVEGEN = 2; // NPWM
timer->COUNT8.CTRLA.bit.MODE = 1; // 8-bit
timer->COUNT8.CTRLA.bit.PRESCALER = 0; // 1:1
while(timer->COUNT8.SYNCBUSY.bit.STATUS);
timer->COUNT8.CTRLBCLR.bit.DIR = 1; // Count UP
while(timer->COUNT8.SYNCBUSY.bit.CTRLB);
timer->COUNT8.CTRLBSET.bit.ONESHOT = 1; // One-shot
while(timer->COUNT8.SYNCBUSY.bit.CTRLB);
timer->COUNT8.PER.reg = 6; // PWM top
while(timer->COUNT8.SYNCBUSY.bit.PER);
timer->COUNT8.CC[0].reg = 2; // Compare
while(timer->COUNT8.SYNCBUSY.bit.CC0);
// Enable async input events,
// event action = restart.
timer->COUNT8.EVCTRL.bit.TCEI = 1;
timer->COUNT8.EVCTRL.bit.EVACT = 1;
// Enable timer
timer->COUNT8.CTRLA.reg |= TC_CTRLA_ENABLE;
while(timer->COUNT8.SYNCBUSY.bit.STATUS);
#if(wrPeripheral == PIO_CCL)
// CONFIGURE CCL (inverts timer/counter output)
MCLK->APBCMASK.bit.CCL_ = 1; // Enable CCL clock
CCL->CTRL.bit.ENABLE = 0; // Disable to config
CCL->CTRL.bit.SWRST = 1; // Reset CCL registers
CCL->LUTCTRL[tcNum].bit.ENABLE = 0; // Disable LUT
CCL->LUTCTRL[tcNum].bit.FILTSEL = 0; // No filter
CCL->LUTCTRL[tcNum].bit.INSEL0 = 6; // TC input
CCL->LUTCTRL[tcNum].bit.INSEL1 = 0; // MASK
CCL->LUTCTRL[tcNum].bit.INSEL2 = 0; // MASK
CCL->LUTCTRL[tcNum].bit.TRUTH = 1; // Invert in 0
CCL->LUTCTRL[tcNum].bit.ENABLE = 1; // Enable LUT
CCL->CTRL.bit.ENABLE = 1; // Enable CCL
#endif
// CONFIGURE EVENT SYSTEM
// Set up event system clock source from GCLK...
// Disable EVSYS, wait for disable
GCLK->PCHCTRL[EVSYS_GCLK_ID_0].bit.CHEN = 0;
while(GCLK->PCHCTRL[EVSYS_GCLK_ID_0].bit.CHEN);
pchctrl.bit.GEN = GCLK_PCHCTRL_GEN_GCLK0_Val;
pchctrl.bit.CHEN = 1; // Re-enable
GCLK->PCHCTRL[EVSYS_GCLK_ID_0].reg = pchctrl.reg;
// Wait for it, then enable EVSYS clock
while(!GCLK->PCHCTRL[EVSYS_GCLK_ID_0].bit.CHEN);
MCLK->APBBMASK.bit.EVSYS_ = 1;
// Connect Timer EVU to ch 0
EVSYS->USER[tcList[tcNum].evu].reg = 1;
// Datasheet recommends single write operation;
// reg instead of bit. Also datasheet: PATH bits
// must be zero when using async!
EVSYS_CHANNEL_Type ev;
ev.reg = 0;
ev.bit.PATH = 2; // Asynchronous
ev.bit.EVGEN = 0x22 + dmaChannel; // DMA channel 0+
EVSYS->Channel[0].CHANNEL.reg = ev.reg;
// Initialize descriptor list.
for(int d=0; d<numDescriptors; d++) {
// No need to set SRCADDR, DESCADDR or BTCNT --
// those are done in the pixel-writing functions.
descriptor[d].BTCTRL.bit.VALID = true;
// Event strobe on beat xfer:
descriptor[d].BTCTRL.bit.EVOSEL = 0x3;
descriptor[d].BTCTRL.bit.BLOCKACT =
DMA_BLOCK_ACTION_NOACT;
descriptor[d].BTCTRL.bit.BEATSIZE = tft8.wide ?
DMA_BEAT_SIZE_HWORD : DMA_BEAT_SIZE_BYTE;
descriptor[d].BTCTRL.bit.SRCINC = 1;
descriptor[d].BTCTRL.bit.DSTINC = 0;
descriptor[d].BTCTRL.bit.STEPSEL =
DMA_STEPSEL_SRC;
descriptor[d].BTCTRL.bit.STEPSIZE =
DMA_ADDRESS_INCREMENT_STEP_SIZE_1;
descriptor[d].DSTADDR.reg =
(uint32_t)tft8.writePort;
}
#endif // __SAMD51
} // end parallel-specific DMA setup
lastFillColor = 0x0000;
lastFillLen = 0;
dma.setCallback(dma_callback);
return; // Success!
// else clean up any partial allocation...
} // end descriptor memalign()
free(pixelBuf[0]);
pixelBuf[0] = pixelBuf[1] = NULL;
} // end pixelBuf malloc()
// Don't currently have a descriptor delete function in
// ZeroDMA lib, but if we did, it would be called here.
} // end addDescriptor()
dma.free(); // Deallocate DMA channel
}
#endif // end USE_SPI_DMA
}
/*!
@brief Call before issuing command(s) or data to display. Performs
chip-select (if required) and starts an SPI transaction (if
using hardware SPI and transactions are supported). Required
for all display types; not an SPI-specific function.
*/
void Adafruit_SPITFT::startWrite(void) {
SPI_BEGIN_TRANSACTION();
if(_cs >= 0) SPI_CS_LOW();
}
/*!
@brief Call after issuing command(s) or data to display. Performs
chip-deselect (if required) and ends an SPI transaction (if
using hardware SPI and transactions are supported). Required
for all display types; not an SPI-specific function.
*/
void Adafruit_SPITFT::endWrite(void) {
if(_cs >= 0) SPI_CS_HIGH();
SPI_END_TRANSACTION();
}
// -------------------------------------------------------------------------
// Lower-level graphics operations. These functions require a chip-select
// and/or SPI transaction around them (via startWrite(), endWrite() above).
// Higher-level graphics primitives might start a single transaction and
// then make multiple calls to these functions (e.g. circle or text
// rendering might make repeated lines or rects) before ending the
// transaction. It's more efficient than starting a transaction every time.
/*!
@brief Draw a single pixel to the display at requested coordinates.
Not self-contained; should follow a startWrite() call.
@param x Horizontal position (0 = left).
@param y Vertical position (0 = top).
@param color 16-bit pixel color in '565' RGB format.
*/
void Adafruit_SPITFT::writePixel(int16_t x, int16_t y, uint16_t color) {
if((x >= 0) && (x < _width) && (y >= 0) && (y < _height)) {
setAddrWindow(x, y, 1, 1);
SPI_WRITE16(color);
}
}
/*!
@brief Issue a series of pixels from memory to the display. Not self-
contained; should follow startWrite() and setAddrWindow() calls.
@param colors Pointer to array of 16-bit pixel values in '565' RGB
format.
@param len Number of elements in 'colors' array.
@param block If true (default case if unspecified), function blocks
until DMA transfer is complete. This is simply IGNORED
if DMA is not enabled. If false, the function returns
immediately after the last DMA transfer is started,
and one should use the dmaWait() function before
doing ANY other display-related activities (or even
any SPI-related activities, if using an SPI display
that shares the bus with other devices).
@param bigEndian If using DMA, and if set true, bitmap in memory is in
big-endian order (most significant byte first). By
default this is false, as most microcontrollers seem
to be little-endian and 16-bit pixel values must be
byte-swapped before issuing to the display (which tend
to be big-endian when using SPI or 8-bit parallel).
If an application can optimize around this -- for
example, a bitmap in a uint16_t array having the byte
values already reordered big-endian, this can save
some processing time here, ESPECIALLY if using this
function's non-blocking DMA mode. Not all cases are
covered...this is really here only for SAMD DMA and
much forethought on the application side.
*/
void Adafruit_SPITFT::writePixels(uint16_t *colors, uint32_t len,
bool block, bool bigEndian) {
if(!len) return; // Avoid 0-byte transfers
#if defined(ESP32) // ESP32 has a special SPI pixel-writing function...
if(connection == TFT_HARD_SPI) {
hwspi._spi->writePixels(colors, len * 2);
return;
}
#elif defined(USE_SPI_DMA)
if((connection == TFT_HARD_SPI) || (connection == TFT_PARALLEL)) {
int maxSpan = maxFillLen / 2; // One scanline max
uint8_t pixelBufIdx = 0; // Active pixel buffer number
#if defined(__SAMD51__)
if(connection == TFT_PARALLEL) {
// Switch WR pin to PWM or CCL
pinPeripheral(tft8._wr, wrPeripheral);
}
#endif // end __SAMD51__
if(!bigEndian) { // Normal little-endian situation...
while(len) {
int count = (len < maxSpan) ? len : maxSpan;
// Because TFT and SAMD endianisms are different, must swap
// bytes from the 'colors' array passed into a DMA working
// buffer. This can take place while the prior DMA transfer
// is in progress, hence the need for two pixelBufs.
for(int i=0; i<count; i++) {
pixelBuf[pixelBufIdx][i] = __builtin_bswap16(*colors++);
}
// The transfers themselves are relatively small, so we don't
// need a long descriptor list. We just alternate between the
// first two, sharing pixelBufIdx for that purpose.
descriptor[pixelBufIdx].SRCADDR.reg =
(uint32_t)pixelBuf[pixelBufIdx] + count * 2;
descriptor[pixelBufIdx].BTCTRL.bit.SRCINC = 1;
descriptor[pixelBufIdx].BTCNT.reg = count * 2;
descriptor[pixelBufIdx].DESCADDR.reg = 0;
while(dma_busy); // Wait for prior line to finish
// Move new descriptor into place...
memcpy(dptr, &descriptor[pixelBufIdx], sizeof(DmacDescriptor));
dma_busy = true;
dma.startJob(); // Trigger SPI DMA transfer
if(connection == TFT_PARALLEL) dma.trigger();
pixelBufIdx = 1 - pixelBufIdx; // Swap DMA pixel buffers
len -= count;
}
} else { // bigEndian == true
// With big-endian pixel data, this can be handled as a single
// DMA transfer using chained descriptors. Even full screen, this
// needs only a relatively short descriptor list, each
// transferring a max of 32,767 (not 32,768) pixels. The list
// was allocated large enough to accommodate a full screen's
// worth of data, so this won't run past the end of the list.
int d, numDescriptors = (len + 32766) / 32767;
for(d=0; d<numDescriptors; d++) {
int count = (len < 32767) ? len : 32767;
descriptor[d].SRCADDR.reg = (uint32_t)colors + count * 2;
descriptor[d].BTCTRL.bit.SRCINC = 1;
descriptor[d].BTCNT.reg = count * 2;
descriptor[d].DESCADDR.reg = (uint32_t)&descriptor[d+1];
len -= count;
colors += count;
}
descriptor[d-1].DESCADDR.reg = 0;
while(dma_busy); // Wait for prior transfer (if any) to finish
// Move first descriptor into place and start transfer...
memcpy(dptr, &descriptor[0], sizeof(DmacDescriptor));
dma_busy = true;
dma.startJob(); // Trigger SPI DMA transfer
if(connection == TFT_PARALLEL) dma.trigger();
} // end bigEndian
lastFillColor = 0x0000; // pixelBuf has been sullied
lastFillLen = 0;
if(block) {
while(dma_busy); // Wait for last line to complete
#if defined(__SAMD51__)
if(connection == TFT_HARD_SPI) {
// See SAMD51 note in writeColor()
hwspi._spi->setDataMode(SPI_MODE0);
} else {
pinPeripheral(tft8._wr, PIO_OUTPUT); // Switch WR back to GPIO
}
#endif // end __SAMD51__
}
return;
}
#endif // end USE_SPI_DMA
// All other cases (bitbang SPI or non-DMA hard SPI or parallel),
// use a loop with the normal 16-bit data write function:
while(len--) {
SPI_WRITE16(*colors++);
}
}
/*!
@brief Wait for the last DMA transfer in a prior non-blocking
writePixels() call to complete. This does nothing if DMA
is not enabled, and is not needed if blocking writePixels()
was used (as is the default case).
*/
void Adafruit_SPITFT::dmaWait(void) {
#if defined(USE_SPI_DMA)
while(dma_busy);
#if defined(__SAMD51__)
if(connection == TFT_HARD_SPI) {
// See SAMD51 note in writeColor()
hwspi._spi->setDataMode(SPI_MODE0);
} else {
pinPeripheral(tft8._wr, PIO_OUTPUT); // Switch WR back to GPIO
}
#endif // end __SAMD51__
#endif
}
/*!
@brief Issue a series of pixels, all the same color. Not self-
contained; should follow startWrite() and setAddrWindow() calls.
@param color 16-bit pixel color in '565' RGB format.
@param len Number of pixels to draw.
*/
void Adafruit_SPITFT::writeColor(uint16_t color, uint32_t len) {
if(!len) return; // Avoid 0-byte transfers
uint8_t hi = color >> 8, lo = color;
#if defined(ESP32) // ESP32 has a special SPI pixel-writing function...
if(connection == TFT_HARD_SPI) {
#define SPI_MAX_PIXELS_AT_ONCE 32
#define TMPBUF_LONGWORDS (SPI_MAX_PIXELS_AT_ONCE + 1) / 2
#define TMPBUF_PIXELS (TMPBUF_LONGWORDS * 2)
static uint32_t temp[TMPBUF_LONGWORDS];
uint32_t c32 = color * 0x00010001;
uint16_t bufLen = (len < TMPBUF_PIXELS) ? len : TMPBUF_PIXELS,
xferLen, fillLen;
// Fill temp buffer 32 bits at a time
fillLen = (bufLen + 1) / 2; // Round up to next 32-bit boundary
for(uint32_t t=0; t<fillLen; t++) {
temp[t] = c32;
}
// Issue pixels in blocks from temp buffer
while(len) { // While pixels remain
xferLen = (bufLen < len) ? bufLen : len; // How many this pass?
writePixels((uint16_t *)temp, xferLen);
len -= xferLen;
}
return;
}
#else // !ESP32
#if defined(USE_SPI_DMA)
if(((connection == TFT_HARD_SPI) || (connection == TFT_PARALLEL)) &&
(len >= 16)) { // Don't bother with DMA on short pixel runs
int i, d, numDescriptors;
if(hi == lo) { // If high & low bytes are same...
onePixelBuf = color;
// Can do this with a relatively short descriptor list,
// each transferring a max of 32,767 (not 32,768) pixels.
// This won't run off the end of the allocated descriptor list,
// since we're using much larger chunks per descriptor here.
numDescriptors = (len + 32766) / 32767;
for(d=0; d<numDescriptors; d++) {
int count = (len < 32767) ? len : 32767;
descriptor[d].SRCADDR.reg = (uint32_t)&onePixelBuf;
descriptor[d].BTCTRL.bit.SRCINC = 0;
descriptor[d].BTCNT.reg = count * 2;
descriptor[d].DESCADDR.reg = (uint32_t)&descriptor[d+1];
len -= count;
}
descriptor[d-1].DESCADDR.reg = 0;
} else {
// If high and low bytes are distinct, it's necessary to fill
// a buffer with pixel data (swapping high and low bytes because
// TFT and SAMD are different endianisms) and create a longer
// descriptor list pointing repeatedly to this data. We can do
// this slightly faster working 2 pixels (32 bits) at a time.
uint32_t *pixelPtr = (uint32_t *)pixelBuf[0],
twoPixels = __builtin_bswap16(color) * 0x00010001;
// We can avoid some or all of the buffer-filling if the color
// is the same as last time...
if(color == lastFillColor) {
// If length is longer than prior instance, fill only the
// additional pixels in the buffer and update lastFillLen.
if(len > lastFillLen) {
int fillStart = lastFillLen / 2,
fillEnd = (((len < maxFillLen) ?
len : maxFillLen) + 1) / 2;
for(i=fillStart; i<fillEnd; i++) pixelPtr[i] = twoPixels;
lastFillLen = fillEnd * 2;
} // else do nothing, don't set pixels or change lastFillLen
} else {
int fillEnd = (((len < maxFillLen) ?
len : maxFillLen) + 1) / 2;
for(i=0; i<fillEnd; i++) pixelPtr[i] = twoPixels;
lastFillLen = fillEnd * 2;
lastFillColor = color;
}
numDescriptors = (len + maxFillLen - 1) / maxFillLen;
for(d=0; d<numDescriptors; d++) {
int pixels = (len < maxFillLen) ? len : maxFillLen,
bytes = pixels * 2;
descriptor[d].SRCADDR.reg = (uint32_t)pixelPtr + bytes;
descriptor[d].BTCTRL.bit.SRCINC = 1;
descriptor[d].BTCNT.reg = bytes;
descriptor[d].DESCADDR.reg = (uint32_t)&descriptor[d+1];
len -= pixels;
}
descriptor[d-1].DESCADDR.reg = 0;
}
memcpy(dptr, &descriptor[0], sizeof(DmacDescriptor));
#if defined(__SAMD51__)
if(connection == TFT_PARALLEL) {
// Switch WR pin to PWM or CCL
pinPeripheral(tft8._wr, wrPeripheral);
}
#endif // end __SAMD51__
dma_busy = true;
dma.startJob();
if(connection == TFT_PARALLEL) dma.trigger();
while(dma_busy); // Wait for completion
// Unfortunately blocking is necessary. An earlier version returned
// immediately and checked dma_busy on startWrite() instead, but it
// turns out to be MUCH slower on many graphics operations (as when
// drawing lines, pixel-by-pixel), perhaps because it's a volatile
// type and doesn't cache. Working on this.
#if defined(__SAMD51__)
if(connection == TFT_HARD_SPI) {
// SAMD51: SPI DMA seems to leave the SPI peripheral in a freaky
// state on completion. Workaround is to explicitly set it back...
hwspi._spi->setDataMode(SPI_MODE0);
} else {
pinPeripheral(tft8._wr, PIO_OUTPUT); // Switch WR back to GPIO
}
#endif // end __SAMD51__
return;
}
#endif // end USE_SPI_DMA
#endif // end !ESP32
// All other cases (non-DMA hard SPI, bitbang SPI, parallel)...
if(connection == TFT_HARD_SPI) {
#if defined(ESP8266)
do {
uint32_t pixelsThisPass = len;
if(pixelsThisPass > 50000) pixelsThisPass = 50000;
len -= pixelsThisPass;
yield(); // Periodic yield() on long fills
while(pixelsThisPass--) {
hwspi._spi->write(hi);
hwspi._spi->write(lo);
}
} while(len);
#else // !ESP8266
while(len--) {
#if defined(__AVR__)
for(SPDR = hi; !(SPSR & _BV(SPIF)); );
for(SPDR = lo; !(SPSR & _BV(SPIF)); );
#elif defined(ESP32)
hwspi._spi->write(hi);
hwspi._spi->write(lo);
#else
hwspi._spi->transfer(hi);
hwspi._spi->transfer(lo);
#endif
}
#endif // end !ESP8266
} else if(connection == TFT_SOFT_SPI) {
#if defined(ESP8266)
do {
uint32_t pixelsThisPass = len;
if(pixelsThisPass > 20000) pixelsThisPass = 20000;
len -= pixelsThisPass;
yield(); // Periodic yield() on long fills
while(pixelsThisPass--) {
for(uint16_t bit=0, x=color; bit<16; bit++) {
if(x & 0x8000) SPI_MOSI_HIGH();
else SPI_MOSI_LOW();
SPI_SCK_HIGH();
SPI_SCK_LOW();
x <<= 1;
}
}
} while(len);
#else // !ESP8266
while(len--) {
#if defined(__AVR__)
for(uint8_t bit=0, x=hi; bit<8; bit++) {
if(x & 0x80) SPI_MOSI_HIGH();
else SPI_MOSI_LOW();
SPI_SCK_HIGH();
SPI_SCK_LOW();
x <<= 1;
}
for(uint8_t bit=0, x=lo; bit<8; bit++) {
if(x & 0x80) SPI_MOSI_HIGH();
else SPI_MOSI_LOW();
SPI_SCK_HIGH();
SPI_SCK_LOW();
x <<= 1;
}
#else // !__AVR__
for(uint16_t bit=0, x=color; bit<16; bit++) {
if(x & 0x8000) SPI_MOSI_HIGH();
else SPI_MOSI_LOW();
SPI_SCK_HIGH();
x <<= 1;
SPI_SCK_LOW();
}
#endif // end !__AVR__
}
#endif // end !ESP8266
} else { // PARALLEL
if(hi == lo) {
#if defined(__AVR__)
len *= 2;
*tft8.writePort = hi;
while(len--) {
TFT_WR_STROBE();
}
#elif defined(USE_FAST_PINIO)
if(!tft8.wide) {
len *= 2;
*tft8.writePort = hi;
} else {
*(volatile uint16_t *)tft8.writePort = color;
}
while(len--) {
TFT_WR_STROBE();
}
#endif
} else {
while(len--) {
#if defined(__AVR__)
*tft8.writePort = hi;
TFT_WR_STROBE();
*tft8.writePort = lo;
#elif defined(USE_FAST_PINIO)
if(!tft8.wide) {
*tft8.writePort = hi;
TFT_WR_STROBE();
*tft8.writePort = lo;
} else {
*(volatile uint16_t *)tft8.writePort = color;
}
#endif
TFT_WR_STROBE();
}
}
}
}
/*!
@brief Draw a filled rectangle to the display. Not self-contained;
should follow startWrite(). Typically used by higher-level
graphics primitives; user code shouldn't need to call this and
is likely to use the self-contained fillRect() instead.
writeFillRect() performs its own edge clipping and rejection;
see writeFillRectPreclipped() for a more 'raw' implementation.
@param x Horizontal position of first corner.
@param y Vertical position of first corner.
@param w Rectangle width in pixels (positive = right of first
corner, negative = left of first corner).
@param h Rectangle height in pixels (positive = below first
corner, negative = above first corner).
@param color 16-bit fill color in '565' RGB format.
@note Written in this deep-nested way because C by definition will
optimize for the 'if' case, not the 'else' -- avoids branches
and rejects clipped rectangles at the least-work possibility.
*/
void Adafruit_SPITFT::writeFillRect(int16_t x, int16_t y,
int16_t w, int16_t h, uint16_t color) {
if(w && h) { // Nonzero width and height?
if(w < 0) { // If negative width...
x += w + 1; // Move X to left edge
w = -w; // Use positive width
}
if(x < _width) { // Not off right
if(h < 0) { // If negative height...
y += h + 1; // Move Y to top edge
h = -h; // Use positive height
}
if(y < _height) { // Not off bottom
int16_t x2 = x + w - 1;
if(x2 >= 0) { // Not off left
int16_t y2 = y + h - 1;
if(y2 >= 0) { // Not off top
// Rectangle partly or fully overlaps screen
if(x < 0) { x = 0; w = x2 + 1; } // Clip left
if(y < 0) { y = 0; h = y2 + 1; } // Clip top
if(x2 >= _width) { w = _width - x; } // Clip right
if(y2 >= _height) { h = _height - y; } // Clip bottom
writeFillRectPreclipped(x, y, w, h, color);
}
}
}
}
}
}
/*!
@brief Draw a horizontal line on the display. Performs edge clipping
and rejection. Not self-contained; should follow startWrite().
Typically used by higher-level graphics primitives; user code
shouldn't need to call this and is likely to use the self-
contained drawFastHLine() instead.
@param x Horizontal position of first point.
@param y Vertical position of first point.
@param w Line width in pixels (positive = right of first point,
negative = point of first corner).
@param color 16-bit line color in '565' RGB format.
*/
void inline Adafruit_SPITFT::writeFastHLine(int16_t x, int16_t y, int16_t w,
uint16_t color) {
if((y >= 0) && (y < _height) && w) { // Y on screen, nonzero width
if(w < 0) { // If negative width...
x += w + 1; // Move X to left edge
w = -w; // Use positive width
}
if(x < _width) { // Not off right
int16_t x2 = x + w - 1;
if(x2 >= 0) { // Not off left
// Line partly or fully overlaps screen
if(x < 0) { x = 0; w = x2 + 1; } // Clip left
if(x2 >= _width) { w = _width - x; } // Clip right
writeFillRectPreclipped(x, y, w, 1, color);
}
}
}
}
/*!
@brief Draw a vertical line on the display. Performs edge clipping and
rejection. Not self-contained; should follow startWrite().
Typically used by higher-level graphics primitives; user code
shouldn't need to call this and is likely to use the self-
contained drawFastVLine() instead.
@param x Horizontal position of first point.
@param y Vertical position of first point.
@param h Line height in pixels (positive = below first point,
negative = above first point).
@param color 16-bit line color in '565' RGB format.
*/
void inline Adafruit_SPITFT::writeFastVLine(int16_t x, int16_t y, int16_t h,
uint16_t color) {
if((x >= 0) && (x < _width) && h) { // X on screen, nonzero height
if(h < 0) { // If negative height...
y += h + 1; // Move Y to top edge
h = -h; // Use positive height
}
if(y < _height) { // Not off bottom
int16_t y2 = y + h - 1;
if(y2 >= 0) { // Not off top
// Line partly or fully overlaps screen
if(y < 0) { y = 0; h = y2 + 1; } // Clip top
if(y2 >= _height) { h = _height - y; } // Clip bottom
writeFillRectPreclipped(x, y, 1, h, color);
}
}
}
}
/*!
@brief A lower-level version of writeFillRect(). This version requires
all inputs are in-bounds, that width and height are positive,
and no part extends offscreen. NO EDGE CLIPPING OR REJECTION IS
PERFORMED. If higher-level graphics primitives are written to
handle their own clipping earlier in the drawing process, this
can avoid unnecessary function calls and repeated clipping
operations in the lower-level functions.
@param x Horizontal position of first corner. MUST BE WITHIN
SCREEN BOUNDS.
@param y Vertical position of first corner. MUST BE WITHIN SCREEN
BOUNDS.
@param w Rectangle width in pixels. MUST BE POSITIVE AND NOT
EXTEND OFF SCREEN.
@param h Rectangle height in pixels. MUST BE POSITIVE AND NOT
EXTEND OFF SCREEN.
@param color 16-bit fill color in '565' RGB format.
@note This is a new function, no graphics primitives besides rects
and horizontal/vertical lines are written to best use this yet.
*/
inline void Adafruit_SPITFT::writeFillRectPreclipped(int16_t x, int16_t y,
int16_t w, int16_t h, uint16_t color) {
setAddrWindow(x, y, w, h);
writeColor(color, (uint32_t)w * h);
}
// -------------------------------------------------------------------------
// Ever-so-slightly higher-level graphics operations. Similar to the 'write'
// functions above, but these contain their own chip-select and SPI
// transactions as needed (via startWrite(), endWrite()). They're typically
// used solo -- as graphics primitives in themselves, not invoked by higher-
// level primitives (which should use the functions above for better
// performance).
/*!
@brief Draw a single pixel to the display at requested coordinates.
Self-contained and provides its own transaction as needed
(see writePixel(x,y,color) for a lower-level variant).
Edge clipping is performed here.
@param x Horizontal position (0 = left).
@param y Vertical position (0 = top).
@param color 16-bit pixel color in '565' RGB format.
*/
void Adafruit_SPITFT::drawPixel(int16_t x, int16_t y, uint16_t color) {
// Clip first...
if((x >= 0) && (x < _width) && (y >= 0) && (y < _height)) {
// THEN set up transaction (if needed) and draw...
startWrite();
setAddrWindow(x, y, 1, 1);
SPI_WRITE16(color);
endWrite();
}
}
/*!
@brief Draw a filled rectangle to the display. Self-contained and
provides its own transaction as needed (see writeFillRect() or
writeFillRectPreclipped() for lower-level variants). Edge
clipping and rejection is performed here.
@param x Horizontal position of first corner.
@param y Vertical position of first corner.
@param w Rectangle width in pixels (positive = right of first
corner, negative = left of first corner).
@param h Rectangle height in pixels (positive = below first
corner, negative = above first corner).
@param color 16-bit fill color in '565' RGB format.
@note This repeats the writeFillRect() function almost in its entirety,
with the addition of a transaction start/end. It's done this way
(rather than starting the transaction and calling writeFillRect()
to handle clipping and so forth) so that the transaction isn't
performed at all if the rectangle is rejected. It's really not
that much code.
*/
void Adafruit_SPITFT::fillRect(int16_t x, int16_t y, int16_t w, int16_t h,
uint16_t color) {
if(w && h) { // Nonzero width and height?
if(w < 0) { // If negative width...
x += w + 1; // Move X to left edge
w = -w; // Use positive width
}
if(x < _width) { // Not off right
if(h < 0) { // If negative height...
y += h + 1; // Move Y to top edge
h = -h; // Use positive height
}
if(y < _height) { // Not off bottom
int16_t x2 = x + w - 1;
if(x2 >= 0) { // Not off left
int16_t y2 = y + h - 1;
if(y2 >= 0) { // Not off top
// Rectangle partly or fully overlaps screen
if(x < 0) { x = 0; w = x2 + 1; } // Clip left
if(y < 0) { y = 0; h = y2 + 1; } // Clip top
if(x2 >= _width) { w = _width - x; } // Clip right
if(y2 >= _height) { h = _height - y; } // Clip bottom
startWrite();
writeFillRectPreclipped(x, y, w, h, color);
endWrite();
}
}
}
}
}
}
/*!
@brief Draw a horizontal line on the display. Self-contained and
provides its own transaction as needed (see writeFastHLine() for
a lower-level variant). Edge clipping and rejection is performed
here.
@param x Horizontal position of first point.
@param y Vertical position of first point.
@param w Line width in pixels (positive = right of first point,
negative = point of first corner).
@param color 16-bit line color in '565' RGB format.
@note This repeats the writeFastHLine() function almost in its
entirety, with the addition of a transaction start/end. It's
done this way (rather than starting the transaction and calling
writeFastHLine() to handle clipping and so forth) so that the
transaction isn't performed at all if the line is rejected.
*/
void Adafruit_SPITFT::drawFastHLine(int16_t x, int16_t y, int16_t w,
uint16_t color) {
if((y >= 0) && (y < _height) && w) { // Y on screen, nonzero width
if(w < 0) { // If negative width...
x += w + 1; // Move X to left edge
w = -w; // Use positive width
}
if(x < _width) { // Not off right
int16_t x2 = x + w - 1;
if(x2 >= 0) { // Not off left
// Line partly or fully overlaps screen
if(x < 0) { x = 0; w = x2 + 1; } // Clip left
if(x2 >= _width) { w = _width - x; } // Clip right
startWrite();
writeFillRectPreclipped(x, y, w, 1, color);
endWrite();
}
}
}
}
/*!
@brief Draw a vertical line on the display. Self-contained and provides
its own transaction as needed (see writeFastHLine() for a lower-
level variant). Edge clipping and rejection is performed here.
@param x Horizontal position of first point.
@param y Vertical position of first point.
@param h Line height in pixels (positive = below first point,
negative = above first point).
@param color 16-bit line color in '565' RGB format.
@note This repeats the writeFastVLine() function almost in its
entirety, with the addition of a transaction start/end. It's
done this way (rather than starting the transaction and calling
writeFastVLine() to handle clipping and so forth) so that the
transaction isn't performed at all if the line is rejected.
*/
void Adafruit_SPITFT::drawFastVLine(int16_t x, int16_t y, int16_t h,
uint16_t color) {
if((x >= 0) && (x < _width) && h) { // X on screen, nonzero height
if(h < 0) { // If negative height...
y += h + 1; // Move Y to top edge
h = -h; // Use positive height
}
if(y < _height) { // Not off bottom
int16_t y2 = y + h - 1;
if(y2 >= 0) { // Not off top
// Line partly or fully overlaps screen
if(y < 0) { y = 0; h = y2 + 1; } // Clip top
if(y2 >= _height) { h = _height - y; } // Clip bottom
startWrite();
writeFillRectPreclipped(x, y, 1, h, color);
endWrite();
}
}
}
}
/*!
@brief Essentially writePixel() with a transaction around it. I don't
think this is in use by any of our code anymore (believe it was
for some older BMP-reading examples), but is kept here in case
any user code relies on it. Consider it DEPRECATED.
@param color 16-bit pixel color in '565' RGB format.
*/
void Adafruit_SPITFT::pushColor(uint16_t color) {
startWrite();
SPI_WRITE16(color);
endWrite();
}
/*!
@brief Draw a 16-bit image (565 RGB) at the specified (x,y) position.
For 16-bit display devices; no color reduction performed.
Adapted from https://github.com/PaulStoffregen/ILI9341_t3
by Marc MERLIN. See examples/pictureEmbed to use this.
5/6/2017: function name and arguments have changed for
compatibility with current GFX library and to avoid naming
problems in prior implementation. Formerly drawBitmap() with
arguments in different order. Handles its own transaction and
edge clipping/rejection.
@param x Top left corner horizontal coordinate.
@param y Top left corner vertical coordinate.
@param pcolors Pointer to 16-bit array of pixel values.
@param w Width of bitmap in pixels.
@param h Height of bitmap in pixels.
*/
void Adafruit_SPITFT::drawRGBBitmap(int16_t x, int16_t y,
uint16_t *pcolors, int16_t w, int16_t h) {
int16_t x2, y2; // Lower-right coord
if(( x >= _width ) || // Off-edge right
( y >= _height) || // " top
((x2 = (x+w-1)) < 0 ) || // " left
((y2 = (y+h-1)) < 0) ) return; // " bottom
int16_t bx1=0, by1=0, // Clipped top-left within bitmap
saveW=w; // Save original bitmap width value
if(x < 0) { // Clip left
w += x;
bx1 = -x;
x = 0;
}
if(y < 0) { // Clip top
h += y;
by1 = -y;
y = 0;
}
if(x2 >= _width ) w = _width - x; // Clip right
if(y2 >= _height) h = _height - y; // Clip bottom
pcolors += by1 * saveW + bx1; // Offset bitmap ptr to clipped top-left
startWrite();
setAddrWindow(x, y, w, h); // Clipped area
while(h--) { // For each (clipped) scanline...
writePixels(pcolors, w); // Push one (clipped) row
pcolors += saveW; // Advance pointer by one full (unclipped) line
}
endWrite();
}
// -------------------------------------------------------------------------
// Miscellaneous class member functions that don't draw anything.
/*!
@brief Invert the colors of the display (if supported by hardware).
Self-contained, no transaction setup required.
@param i true = inverted display, false = normal display.
*/
void Adafruit_SPITFT::invertDisplay(bool i) {
startWrite();
writeCommand(i ? invertOnCommand : invertOffCommand);
endWrite();
}
/*!
@brief Given 8-bit red, green and blue values, return a 'packed'
16-bit color value in '565' RGB format (5 bits red, 6 bits
green, 5 bits blue). This is just a mathematical operation,
no hardware is touched.
@param red 8-bit red brightnesss (0 = off, 255 = max).
@param green 8-bit green brightnesss (0 = off, 255 = max).
@param blue 8-bit blue brightnesss (0 = off, 255 = max).
@return 'Packed' 16-bit color value (565 format).
*/
uint16_t Adafruit_SPITFT::color565(uint8_t red, uint8_t green, uint8_t blue) {
return ((red & 0xF8) << 8) | ((green & 0xFC) << 3) | (blue >> 3);
}
/*!
@brief Adafruit_SPITFT Send Command handles complete sending of commands and data
@param commandByte The Command Byte
@param dataBytes A pointer to the Data bytes to send
@param numDataBytes The number of bytes we should send
*/
void Adafruit_SPITFT::sendCommand(uint8_t commandByte, uint8_t *dataBytes, uint8_t numDataBytes) {
SPI_BEGIN_TRANSACTION();
if(_cs >= 0) SPI_CS_LOW();
SPI_DC_LOW(); // Command mode
spiWrite(commandByte); // Send the command byte
SPI_DC_HIGH();
for (int i=0; i<numDataBytes; i++) {
spiWrite(*dataBytes); // Send the data bytes
dataBytes++;
}
if(_cs >= 0) SPI_CS_HIGH();
SPI_END_TRANSACTION();
}
/*!
@brief Adafruit_SPITFT Send Command handles complete sending of commands and const data
@param commandByte The Command Byte
@param dataBytes A pointer to the Data bytes to send
@param numDataBytes The number of bytes we should send
*/
void Adafruit_SPITFT::sendCommand(uint8_t commandByte, const uint8_t *dataBytes, uint8_t numDataBytes) {
SPI_BEGIN_TRANSACTION();
if(_cs >= 0) SPI_CS_LOW();
SPI_DC_LOW(); // Command mode
spiWrite(commandByte); // Send the command byte
SPI_DC_HIGH();
for (int i=0; i<numDataBytes; i++) {
spiWrite(pgm_read_byte(dataBytes++)); // Send the data bytes
}
if(_cs >= 0) SPI_CS_HIGH();
SPI_END_TRANSACTION();
}
// -------------------------------------------------------------------------
// Lowest-level hardware-interfacing functions. Many of these are inline and
// compile to different things based on #defines -- typically just a few
// instructions. Others, not so much, those are not inlined.
/*!
@brief Start an SPI transaction if using the hardware SPI interface to
the display. If using an earlier version of the Arduino platform
(before the addition of SPI transactions), this instead attempts
to set up the SPI clock and mode. No action is taken if the
connection is not hardware SPI-based. This does NOT include a
chip-select operation -- see startWrite() for a function that
encapsulated both actions.
*/
inline void Adafruit_SPITFT::SPI_BEGIN_TRANSACTION(void) {
if(connection == TFT_HARD_SPI) {
#if defined(SPI_HAS_TRANSACTION)
hwspi._spi->beginTransaction(hwspi.settings);
#else // No transactions, configure SPI manually...
#if defined(__AVR__) || defined(TEENSYDUINO) || defined(ARDUINO_ARCH_STM32F1)
hwspi._spi->setClockDivider(SPI_CLOCK_DIV2);
#elif defined(__arm__)
hwspi._spi->setClockDivider(11);
#elif defined(ESP8266) || defined(ESP32)
hwspi._spi->setFrequency(hwspi._freq);
#elif defined(RASPI) || defined(ARDUINO_ARCH_STM32F1)
hwspi._spi->setClock(hwspi._freq);
#endif
hwspi._spi->setBitOrder(MSBFIRST);
hwspi._spi->setDataMode(SPI_MODE0);
#endif // end !SPI_HAS_TRANSACTION
}
}
/*!
@brief End an SPI transaction if using the hardware SPI interface to
the display. No action is taken if the connection is not
hardware SPI-based or if using an earlier version of the Arduino
platform (before the addition of SPI transactions). This does
NOT include a chip-deselect operation -- see endWrite() for a
function that encapsulated both actions.
*/
inline void Adafruit_SPITFT::SPI_END_TRANSACTION(void) {
#if defined(SPI_HAS_TRANSACTION)
if(connection == TFT_HARD_SPI) {
hwspi._spi->endTransaction();
}
#endif
}
/*!
@brief Issue a single 8-bit value to the display. Chip-select,
transaction and data/command selection must have been
previously set -- this ONLY issues the byte. This is another of
those functions in the library with a now-not-accurate name
that's being maintained for compatibility with outside code.
This function is used even if display connection is parallel.
@param b 8-bit value to write.
*/
void Adafruit_SPITFT::spiWrite(uint8_t b) {
if(connection == TFT_HARD_SPI) {
#if defined(__AVR__)
for(SPDR = b; !(SPSR & _BV(SPIF)); );
#elif defined(ESP8266) || defined(ESP32)
hwspi._spi->write(b);
#else
hwspi._spi->transfer(b);
#endif
} else if(connection == TFT_SOFT_SPI) {
for(uint8_t bit=0; bit<8; bit++) {
if(b & 0x80) SPI_MOSI_HIGH();
else SPI_MOSI_LOW();
SPI_SCK_HIGH();
b <<= 1;
SPI_SCK_LOW();
}
} else { // TFT_PARALLEL
#if defined(__AVR__)
*tft8.writePort = b;
#elif defined(USE_FAST_PINIO)
if(!tft8.wide) *tft8.writePort = b;
else *(volatile uint16_t *)tft8.writePort = b;
#endif
TFT_WR_STROBE();
}
}
/*!
@brief Write a single command byte to the display. Chip-select and
transaction must have been previously set -- this ONLY sets
the device to COMMAND mode, issues the byte and then restores
DATA mode. There is no corresponding explicit writeData()
function -- just use spiWrite().
@param cmd 8-bit command to write.
*/
void Adafruit_SPITFT::writeCommand(uint8_t cmd) {
SPI_DC_LOW();
spiWrite(cmd);
SPI_DC_HIGH();
}
/*!
@brief Read a single 8-bit value from the display. Chip-select and
transaction must have been previously set -- this ONLY reads
the byte. This is another of those functions in the library
with a now-not-accurate name that's being maintained for
compatibility with outside code. This function is used even if
display connection is parallel.
@return Unsigned 8-bit value read (always zero if USE_FAST_PINIO is
not supported by the MCU architecture).
*/
uint8_t Adafruit_SPITFT::spiRead(void) {
uint8_t b = 0;
uint16_t w = 0;
if(connection == TFT_HARD_SPI) {
return hwspi._spi->transfer((uint8_t)0);
} else if(connection == TFT_SOFT_SPI) {
if(swspi._miso >= 0) {
for(uint8_t i=0; i<8; i++) {
SPI_SCK_HIGH();
b <<= 1;
if(SPI_MISO_READ()) b++;
SPI_SCK_LOW();
}
}
return b;
} else { // TFT_PARALLEL
if(tft8._rd >= 0) {
#if defined(USE_FAST_PINIO)
TFT_RD_LOW(); // Read line LOW
#if defined(__AVR__)
*tft8.portDir = 0x00; // Set port to input state
w = *tft8.readPort; // Read value from port
*tft8.portDir = 0xFF; // Restore port to output
#else // !__AVR__
if(!tft8.wide) { // 8-bit TFT connection
#if defined(HAS_PORT_SET_CLR)
*tft8.dirClr = 0xFF; // Set port to input state
w = *tft8.readPort; // Read value from port
*tft8.dirSet = 0xFF; // Restore port to output
#else // !HAS_PORT_SET_CLR
*tft8.portDir = 0x00; // Set port to input state
w = *tft8.readPort; // Read value from port
*tft8.portDir = 0xFF; // Restore port to output
#endif // end HAS_PORT_SET_CLR
} else { // 16-bit TFT connection
#if defined(HAS_PORT_SET_CLR)
*(volatile uint16_t *)tft8.dirClr = 0xFFFF; // Input state
w = *(volatile uint16_t *)tft8.readPort; // 16-bit read
*(volatile uint16_t *)tft8.dirSet = 0xFFFF; // Output state
#else // !HAS_PORT_SET_CLR
*(volatile uint16_t *)tft8.portDir = 0x0000; // Input state
w = *(volatile uint16_t *)tft8.readPort; // 16-bit read
*(volatile uint16_t *)tft8.portDir = 0xFFFF; // Output state
#endif // end !HAS_PORT_SET_CLR
}
TFT_RD_HIGH(); // Read line HIGH
#endif // end !__AVR__
#else // !USE_FAST_PINIO
w = 0; // Parallel TFT is NOT SUPPORTED without USE_FAST_PINIO
#endif // end !USE_FAST_PINIO
}
return w;
}
}
/*!
@brief Set the software (bitbang) SPI MOSI line HIGH.
*/
inline void Adafruit_SPITFT::SPI_MOSI_HIGH(void) {
#if defined(USE_FAST_PINIO)
#if defined(HAS_PORT_SET_CLR)
#if defined(KINETISK)
*swspi.mosiPortSet = 1;
#else // !KINETISK
*swspi.mosiPortSet = swspi.mosiPinMask;
#endif
#else // !HAS_PORT_SET_CLR
*swspi.mosiPort |= swspi.mosiPinMaskSet;
#endif // end !HAS_PORT_SET_CLR
#else // !USE_FAST_PINIO
digitalWrite(swspi._mosi, HIGH);
#if defined(ESP32)
for(volatile uint8_t i=0; i<1; i++);
#endif // end ESP32
#endif // end !USE_FAST_PINIO
}
/*!
@brief Set the software (bitbang) SPI MOSI line LOW.
*/
inline void Adafruit_SPITFT::SPI_MOSI_LOW(void) {
#if defined(USE_FAST_PINIO)
#if defined(HAS_PORT_SET_CLR)
#if defined(KINETISK)
*swspi.mosiPortClr = 1;
#else // !KINETISK
*swspi.mosiPortClr = swspi.mosiPinMask;
#endif
#else // !HAS_PORT_SET_CLR
*swspi.mosiPort &= swspi.mosiPinMaskClr;
#endif // end !HAS_PORT_SET_CLR
#else // !USE_FAST_PINIO
digitalWrite(swspi._mosi, LOW);
#if defined(ESP32)
for(volatile uint8_t i=0; i<1; i++);
#endif // end ESP32
#endif // end !USE_FAST_PINIO
}
/*!
@brief Set the software (bitbang) SPI SCK line HIGH.
*/
inline void Adafruit_SPITFT::SPI_SCK_HIGH(void) {
#if defined(USE_FAST_PINIO)
#if defined(HAS_PORT_SET_CLR)
#if defined(KINETISK)
*swspi.sckPortSet = 1;
#else // !KINETISK
*swspi.sckPortSet = swspi.sckPinMask;
#endif
#else // !HAS_PORT_SET_CLR
*swspi.sckPort |= swspi.sckPinMaskSet;
#endif // end !HAS_PORT_SET_CLR
#else // !USE_FAST_PINIO
digitalWrite(swspi._sck, HIGH);
#if defined(ESP32)
for(volatile uint8_t i=0; i<1; i++);
#endif // end ESP32
#endif // end !USE_FAST_PINIO
}
/*!
@brief Set the software (bitbang) SPI SCK line LOW.
*/
inline void Adafruit_SPITFT::SPI_SCK_LOW(void) {
#if defined(USE_FAST_PINIO)
#if defined(HAS_PORT_SET_CLR)
#if defined(KINETISK)
*swspi.sckPortClr = 1;
#else // !KINETISK
*swspi.sckPortClr = swspi.sckPinMask;
#endif
#else // !HAS_PORT_SET_CLR
*swspi.sckPort &= swspi.sckPinMaskClr;
#endif // end !HAS_PORT_SET_CLR
#else // !USE_FAST_PINIO
digitalWrite(swspi._sck, LOW);
#if defined(ESP32)
for(volatile uint8_t i=0; i<1; i++);
#endif // end ESP32
#endif // end !USE_FAST_PINIO
}
/*!
@brief Read the state of the software (bitbang) SPI MISO line.
@return true if HIGH, false if LOW.
*/
inline bool Adafruit_SPITFT::SPI_MISO_READ(void) {
#if defined(USE_FAST_PINIO)
#if defined(KINETISK)
return *swspi.misoPort;
#else // !KINETISK
return *swspi.misoPort & swspi.misoPinMask;
#endif // end !KINETISK
#else // !USE_FAST_PINIO
return digitalRead(swspi._miso);
#endif // end !USE_FAST_PINIO
}
/*!
@brief Issue a single 16-bit value to the display. Chip-select,
transaction and data/command selection must have been
previously set -- this ONLY issues the word. Despite the name,
this function is used even if display connection is parallel;
name was maintaned for backward compatibility. Naming is also
not consistent with the 8-bit version, spiWrite(). Sorry about
that. Again, staying compatible with outside code.
@param w 16-bit value to write.
*/
void Adafruit_SPITFT::SPI_WRITE16(uint16_t w) {
if(connection == TFT_HARD_SPI) {
#if defined(__AVR__)
for(SPDR = (w >> 8); (!(SPSR & _BV(SPIF))); );
for(SPDR = w ; (!(SPSR & _BV(SPIF))); );
#elif defined(ESP8266) || defined(ESP32)
hwspi._spi->write16(w);
#else
hwspi._spi->transfer(w >> 8);
hwspi._spi->transfer(w);
#endif
} else if(connection == TFT_SOFT_SPI) {
for(uint8_t bit=0; bit<16; bit++) {
if(w & 0x8000) SPI_MOSI_HIGH();
else SPI_MOSI_LOW();
SPI_SCK_HIGH();
SPI_SCK_LOW();
w <<= 1;
}
} else { // TFT_PARALLEL
#if defined(__AVR__)
*tft8.writePort = w >> 8;
TFT_WR_STROBE();
*tft8.writePort = w;
#elif defined(USE_FAST_PINIO)
if(!tft8.wide) {
*tft8.writePort = w >> 8;
TFT_WR_STROBE();
*tft8.writePort = w;
} else {
*(volatile uint16_t *)tft8.writePort = w;
}
#endif
TFT_WR_STROBE();
}
}
/*!
@brief Issue a single 32-bit value to the display. Chip-select,
transaction and data/command selection must have been
previously set -- this ONLY issues the longword. Despite the
name, this function is used even if display connection is
parallel; name was maintaned for backward compatibility. Naming
is also not consistent with the 8-bit version, spiWrite().
Sorry about that. Again, staying compatible with outside code.
@param l 32-bit value to write.
*/
void Adafruit_SPITFT::SPI_WRITE32(uint32_t l) {
if(connection == TFT_HARD_SPI) {
#if defined(__AVR__)
for(SPDR = (l >> 24); !(SPSR & _BV(SPIF)); );
for(SPDR = (l >> 16); !(SPSR & _BV(SPIF)); );
for(SPDR = (l >> 8); !(SPSR & _BV(SPIF)); );
for(SPDR = l ; !(SPSR & _BV(SPIF)); );
#elif defined(ESP8266) || defined(ESP32)
hwspi._spi->write32(l);
#else
hwspi._spi->transfer(l >> 24);
hwspi._spi->transfer(l >> 16);
hwspi._spi->transfer(l >> 8);
hwspi._spi->transfer(l);
#endif
} else if(connection == TFT_SOFT_SPI) {
for(uint8_t bit=0; bit<32; bit++) {
if(l & 0x80000000) SPI_MOSI_HIGH();
else SPI_MOSI_LOW();
SPI_SCK_HIGH();
SPI_SCK_LOW();
l <<= 1;
}
} else { // TFT_PARALLEL
#if defined(__AVR__)
*tft8.writePort = l >> 24;
TFT_WR_STROBE();
*tft8.writePort = l >> 16;
TFT_WR_STROBE();
*tft8.writePort = l >> 8;
TFT_WR_STROBE();
*tft8.writePort = l;
#elif defined(USE_FAST_PINIO)
if(!tft8.wide) {
*tft8.writePort = l >> 24;
TFT_WR_STROBE();
*tft8.writePort = l >> 16;
TFT_WR_STROBE();
*tft8.writePort = l >> 8;
TFT_WR_STROBE();
*tft8.writePort = l;
} else {
*(volatile uint16_t *)tft8.writePort = l >> 16;
TFT_WR_STROBE();
*(volatile uint16_t *)tft8.writePort = l;
}
#endif
TFT_WR_STROBE();
}
}
/*!
@brief Set the WR line LOW, then HIGH. Used for parallel-connected
interfaces when writing data.
*/
inline void Adafruit_SPITFT::TFT_WR_STROBE(void) {
#if defined(USE_FAST_PINIO)
#if defined(HAS_PORT_SET_CLR)
#if defined(KINETISK)
*tft8.wrPortClr = 1;
*tft8.wrPortSet = 1;
#else // !KINETISK
*tft8.wrPortClr = tft8.wrPinMask;
*tft8.wrPortSet = tft8.wrPinMask;
#endif // end !KINETISK
#else // !HAS_PORT_SET_CLR
*tft8.wrPort &= tft8.wrPinMaskClr;
*tft8.wrPort |= tft8.wrPinMaskSet;
#endif // end !HAS_PORT_SET_CLR
#else // !USE_FAST_PINIO
digitalWrite(tft8._wr, LOW);
digitalWrite(tft8._wr, HIGH);
#endif // end !USE_FAST_PINIO
}
/*!
@brief Set the RD line HIGH. Used for parallel-connected interfaces
when reading data.
*/
inline void Adafruit_SPITFT::TFT_RD_HIGH(void) {
#if defined(USE_FAST_PINIO)
#if defined(HAS_PORT_SET_CLR)
*tft8.rdPortSet = tft8.rdPinMask;
#else // !HAS_PORT_SET_CLR
*tft8.rdPort |= tft8.rdPinMaskSet;
#endif // end !HAS_PORT_SET_CLR
#else // !USE_FAST_PINIO
digitalWrite(tft8._rd, HIGH);
#endif // end !USE_FAST_PINIO
}
/*!
@brief Set the RD line LOW. Used for parallel-connected interfaces
when reading data.
*/
inline void Adafruit_SPITFT::TFT_RD_LOW(void) {
#if defined(USE_FAST_PINIO)
#if defined(HAS_PORT_SET_CLR)
*tft8.rdPortClr = tft8.rdPinMask;
#else // !HAS_PORT_SET_CLR
*tft8.rdPort &= tft8.rdPinMaskClr;
#endif // end !HAS_PORT_SET_CLR
#else // !USE_FAST_PINIO
digitalWrite(tft8._rd, LOW);
#endif // end !USE_FAST_PINIO
}
#endif // end __AVR_ATtiny85__
Reference in New Issue View Git Blame Copy Permalink